EZVIZ C1T User Manual
Displayed below is the user manual for C1T by EZVIZ which is a product in the Security Cameras category. This manual has pages.
Related Manuals
COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”).
This user manual (hereinafter referred to as “the Manual”) cannot be reproduced, changed,
translated, or distributed, partially or wholly, by any means, without the prior written
permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts,
images and all other information hereinafter are for description and explanation only. The
information contained in the Manual is subject to change, without notice, due to firmware
updates or other reasons. Please find the latest version in the ™ website
(http://www.ezvizlife.com).
Revision Record
New release – January, 2019
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of
EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the
properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED,
WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL
FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN
NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE
TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE
OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE
OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY
DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION
CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED;
B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D)
YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD
PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG OTHERS. REGARDING
TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK,
HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.SURVEILLANCE LAWS
AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE
THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN
THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW,
THE LATTER PREVAILS.
1
Box Content
Internet Camera (x1) USB Cable (x1) Power Adapter (x1)
Foam Sticker (x1) Metal Plate (x1) Base (x1) Drill Template (x1)
Screw Kit (x1) Regulatory Information (x1) Quick Start Guide (x1)
The camera's appearance is subject to the determined by the actual one you have bought.
Product Overview
Lens
LED Indicator
MIC
Magnetic Base
Speaker
RESET Button
Power Input
MicroSD Card Slot
Name Description
LED Indicator • Solid Red: Camera is starting up.
• Slow-flashing Red: Wi-Fi connection has failed.
• Fast-flashing Red: Device exception (e.g. microSD card error).
• Solid Blue: Video is being viewed or played back in the EZVIZ app.
• Fast-flashing Blue: Camera is ready for the Wi-Fi connection.
• Slow-flashing Blue: Camera is running properly.
Micro SD Card
(soldseparately)
Initialize the card in the EZVIZ app before using it.
RESET Button Hold down the RESET Button for 5 seconds while the camera is running,
thecamerarestartsandallparametersareresettodefault.
MIC For audio input.
Speaker For audio output.
2
Set up your device
Step 1 Power-on
Plug one end of the power cable into the camera, and plug the other end into the power
adapter. Then plug the adapter into a power outlet, as shown in the figure below.
Power Outlet
Power Cable
Step 2 Camera Setup
1. Create a user account
-Connect your mobile phone to a Wi-Fi network.
-Download and install the EZVIZ app by searching “EZVIZ” in the App Store or
Google Play StoreTM.
-Launch the app and register for an EZVIZ user account by following the start-up wizard.
2. Add a camera to the EZVIZ app
-Log in the EZVIZ app.
-On the EZVIZ app Home screen, tap “+” in the upper-right hand corner to go to the QR
code scanning interface.
-Scan the QR Code on the bottom of the camera.
Bottom of Camera
-Follow the EZVIZ app wizard to finish Wi-Fi configuration.
For Wi-Fi configuration, make sure your phone is connected to a 2.4GHz Wi-Fi
network from the router.
Installation
There is a magnetic piece inside the camera. You can skip the following steps and attach the
camera directly to a magnetic surface.
•Secure the base to the desired position with screws. Refer to Option 1.
•Secure the metal plate to the desired position with foam sticker. Refer to Option 2.
Option 1 Secure the base with screws
Step 1 Place the drill template onto a clean and flat surface.
Step 2 (For cement wall/ceiling only) Drill screw holes according to the template,
and insert anchors.
Step 3 Fix the base on the template with screws.
Step 4 Mount the camera to the base.
ScrewsAnchors
Drill Template Base
3
Option 2 Secure the metal plate with the foam sticker
Step 1 Select a clean and flat surface.
Step 2 Secure the metal plate with the foam sticker.
Step 3 Attach the camera directly to the metal plate.
Foam Sticker Metal Plate
Appendix
Step 1 Install Memory Cards
Insert a microSD card into the slot until it clicks into place.
Step 2 Initializing Memory Cards
1. In the EZVIZ app, check the memory card status by tapping on the Storage Status
in the Device Settings interface.
2. If the memory card status displays as Uninitialized, tap to initialize it. The status
will then change to Normal.
EZVIZ Connect
Use Amazon Alexa
These instructions will enable you to control your EZVIZ devices with Amazon Alexa. If you
runintoanydifcultiesduringtheprocess,pleaserefertoTroubleshooting.
Before you start, make sure that:
1. EZVIZ devices are connected to the EZVIZ app.
2. In the EZVIZ app, turn off the "Image Encryption" in the Device Settings page.
3. You have an Alexa-enabled device (i.e Echo Spot, Echo-Show, All-new Echo-Show, Fire TV
(all generations), Fire TV stick (second generation only), or Fire TV Edition smart TVs).
4. The Amazon Alexa app is already installed on your smart device, and you have created
an account.
To Control EZVIZ devices with Amazon Alexa:
1. Open the Alexa app and select "Skills and Games" from the menu.
2. OntheSkillsandGamesscreen,searchfor"EZVIZ",andyouwillnd"EZVIZ"skills.
3. Select your EZVIZ device's skill, then tap ENABLE TO USE.
4. Enter your EZVIZ username and password, and tap Sign in.
5. Tap the Authorize button to authorize Alexa to access your EZVIZ account, so that Alexa
can control your EZVIZ devices.
6. You will see "EZVIZ has been successfully linked", then tap DISCOVER DEVICES to allow
Alexa to discover all your EZVIZ devices.
7. Go back to Alexa app menu and select "Devices", and under devices you will see all your
EZVIZ devices.
4
Voice Command
Discover a new smart device via the "Smart Home" menu in the Alexa app or the Alexa Voice
Control function.
Once the device is found, you can control it with your voice. Speak simple commands to Alexa.
Yourdevice'snameforexample:"showxxxxcamera,"canbemodiedintheEZVIZapp.
Every time you change the name of the device, you will need to discover the device again
to update the name.
Troubleshooting
What do I do if Alexa fails to discover my device?
Check if there are any Internet connecting problems.
Try to reboot the smart device and re-discover the device on Alexa.
Whydoesthedevice'sstatusshow"Ofine"onAlexa?
Your wireless connection might have been disconnected. Reboot the smart device and
re-discover on Alexa.
Internet access on your router could be unavailable. Check if your router is connected to the
Internet and try again.
FordetailsaboutcountriesthatsupporttheusingofAmazonAlexa,seeitsofcialwebsite.
Use Google Assistant
With the Google Assistant, you can activate your EZVIZ device and watch live by speaking
Google Assistant voice commands.
The following devices and apps are required:
1. A functional EZVIZ app.
2. In the EZVIZ app, turn off the "Image Encryption" and turn on the "Audio" in the Device
Settings page.
3. A TV with functional Chromecast connecting to it.
4. The Google Assistant app on your phone.
To get started, follow the steps below:
1. Set up the EZVIZ device and make sure it works properly on the app.
2. Download the Google Home app from the App Store or Google Play Store(TM) and log into
your Google account.
3. On the Myhome screen, tap “+” on the upper-left corner, and select "Set up device" from the
menu list to go to the Set up interface.
4. Tap"WorkswithGoogle",andsearchfor"EZVIZ",whereyouwillnd"EZVIZ"skills.
5. Enter your EZVIZ username and password, and tap Sign in.
6. Tap the Authorize button to authorize Google to access your EZVIZ account, so that
Google can control your EZVIZ devices.
7. Tap "Return to app".
8. Follow the above steps to complete the authorization. When synchronization is completed,
EZVIZ service will be listed under your list of services. To see a list of compatible devices
under your EZVIZ account, tap on the EZVIZ service icon.
9. Now try some commands. Use the name of the camera that you created when you set
up the system.
Users can manage devices as a single entity or in a group. Adding devices to a room allows
users to control a group of devices at the same time using one command.
See the link for more information:
https://support.google.com/googlehome/answer/7029485?co=GENIE.
Platform%3DAndroid&hl=en
For detailed information, please visit www.ezvizlife.com.