Intellinet 162470 User Manual
Displayed below is the user manual for 162470 by Intellinet which is a product in the Patch Panels category. This manual has pages.
Related Manuals
Are you completely satisfied with this product?
Please contact your
INTELLINET NETWORK SOLUTIONS™
dealer with comments or questions.
Copyright © INTELLINET NETWORK
SOLUTIONS
All products mentioned are trademarks or registered trademarks
of their respective owners.
www.intellinet-network.com
WALL
MOUNT
PATCH PANEL
QUICK
START
GUIDE
INT-PPWM-QSG-1206-02
Thank you for purchasing this INTELLINET NETWORK SOLUTIONS™ Wall Mount
Patch Panel.
Follow the steps on this quick start guide for easy installation and use of either the
Cat5e or Cat6 version of this product.
T568A
PIN 5 WHITE/BLUE
PIN 4 BLUE
PIN 1 WHITE/GREEN
PIN 2 GREEN
PIN 3 WHITE/ORANGE
PIN 6 ORANGE
PIN 7 WHITE/BROWN
PIN 8 BROWN
T568B
PIN 5 WHITE/BLUE
PIN 4 BLUE
PIN 1 WHITE/ORANGE
PIN 2 ORANGE
PIN 3 WHITE/GREEN
PIN 6 GREEN
PIN 7 WHITE/BROWN
PIN 8 BROWN
1. Carefully strip away approximately 30 mm of the cable jacket(s) (above
left) to be connected to the Patch Panel, separating the wires into four
pairs. Using a wire cutter, cut the wire holder (above right) flush with the
cable jacket.
2. Follow the IDC
color-code chart
above to position
the wires, then use
a Krone punch-
down tool to crimp
and connect them.
approx. 30 mm wire holder
IDC (3 options)
Krone
type
110D
type
110D & Krone
IDC compatible
12-port
Cat5e
UTP
model
shown