Intellinet 525725 User Manual
Displayed below is the user manual for 525725 by Intellinet which is a product in the Wireless Routers category. This manual has pages.
Related Manuals
Guest
Guest
10/10 0
Mbps
GbE
Whole Home Mesh Wireless
AC1200 Kit Instructions
Model 525725
Important: Read before use. • Importante: Leer antes de usar.
intellinet-network.com
10/ 10 0
Mbps
GbE
Extender
Router
Connections
Pair an Extender: Use a
paperclip or a similarly sized
item to press and hold the pair
button for one (1) second.
System Reset: Use a paperclip
or a similarly sized item to
press and hold the reset
button for six (6) seconds.
Router & Extender LED Indicators
LED What It Means
Solid purple Start up
Solid blue Router is connected to the Internet or the extender and router are paired
Blue ash Touch-and-connect function activated or an extender is pairing with the router
Red ash Router is not connected to the Internet or an extender is disconnected
Solid red Router & extender connection is weak — bring the extender closer to the router
Easy setup & management
on the free IntellinetMesh app
Touch-and-Connect
Setup: Go to the wireless
app. In the settings, select
Touch-and-Connect.
Set a value from 30
to 200 seconds.
Touch-and-Connect
Password-free Internet Access for Guests
1 Touch the sensing area
on the top of the router;
the LED ashes blue.
2 For two minutes,
guests in your mesh
environment can go to
the wireless settings
of their device and get
onto the “Guest” network
without a password.
2 Connect a
power adapter
from the mesh
router to a
power outlet.
Then, turn on
the router.
1 Use the included
Ethernet cable
to connect your
modem’s LAN port
to the mesh router’s
Internet port. Note:
Place the mesh
router away from
sources of possible
interference.
1 Set Up and Connect Your Mesh Router
Get Started Reboot Your Modem
Unplug the power cable from your modem and remove any backup batteries.
Then, reinstall the batteries and reconnect power to your modem.
Package Contents
• 1 Mesh Router
• 2 Mesh Extenders
• 3 Power Adapters
• 1 Ethernet Cable
• Instructions
Default Parameters
Default IP: 192.168.10.1
Login: http://ap.setup
Login Password: (see label on bottom of router)
SSID: IntellinetMesh
Touch-and-Connect: Guest
MH_525725_QIG_0619_REV_5.02_EN
Printed on recycled paper.
North & South America
IC Intracom Americas
550 Commerce Blvd.
Oldsmar, FL 34677,
USA
Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221,
Taiwan
Europe
IC Intracom Europe
Löhbacher Str. 7
D-58553 Halver,
Germany
All trademarks and trade names are the property of their respective owners.
© IC Intracom. All rights reserved. Intellinet Network Solutions is a trademark of IC
Intracom, registered in the U.S. and other countries.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT
(Applicable In The European Union And Other European
Countries With Separate Collection Systems)
This symbol on the product or its packaging means that this product
must not be treated as unsorted household waste. In accordance
with EU Directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), this electrical product must be disposed of in
accordance with the user’s local regulations for electrical or electronic
waste. Please dispose of this product by returning it to your local
point of sale or recycling pickup point in your municipality.
WARRANTY
USA & CANADA:
intellinetsolutions.com
EUROPE:
intellinetnetwork.eu
REGULATORY STATEMENTS
FCC Class B
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by one or more
of the following measures: reorient or relocate the receiving antenna;
increase the separation between the equipment and the receiver; connect
the equipment to an outlet on a circuit dierent from the receiver; or
consult the dealer or an experienced radio/TV technician for help.
CE
The operating frequencies of this product are 2.4 & 5 GHz, and the maximum
power outputs are 100 mW on the 2.4 GHz band and 200 mW on the 5 GHz.
This device complies with the requirements of CE RED 2014/53/EU, 2014/30/
EU and/or 2014/35/EC. The Declaration of Conformity for is available at:
intellinet-network.com
AT BE BG CY CZ DE DK EE EL ES FI FR HR HU
IE IT LT LU LV MT NL PL PT RO SE SI SK UK
2 Create Your Mesh Network
1 Log in to your mesh router through one of the following:
• Your web browser: Connect your computer to the mesh
router with another Ethernet cable, or access the router
wirelessly through your computer’s wireless icon (in
the Windows taskbar or the Mac menu bar ).
Intellinet
Intellinet
• The App: Download and launch the
IntellinetMesh app. Follow the steps.
Intellinet
Intellinet
Then, connect to the Intellinet network.
2 Congure its settings:
• In your web browser, go to 192.168.10.1 or http://ap.setup.
Log in to the setup wizard that follows with the Password
found on the bottom of the router. Fill in the requested info
on each of the wizard’s pages and click Save or Apply.
• In the System Setup page, select your Country/
Region and Time Zone from the dropdown menus.
Then, create a new case-sensitive password. Click
Save. Note: Use this password on your next login.
• Select Router to continue in the Router Wizard.
• Choose your level of security from the Security Type
drop-down menu (WPA/WPA2 Mix is recommended),
and create a dierent case-sensitive wireless password.
Installation and basic setup may take a few minutes to complete.
For more information, visit the Downloads
tab of this product’s webpage:
intellinetsolutions.com/barcode/525725.
3 Position Your Mesh Extenders
2 Connect the other power
adapters from your mesh
extenders to power outlets.
1 Place your mesh
extenders in the central
areas of your home.
Provide info about your network.
• Choose your Internet connection from the WAN Type drop-
down menu and enter details into the corresponding elds:
• DHCP (usually for cable or ber customers)
• PPPoE (usually for DSL customers)
• Static IP (usually for customers whose Internet Service Provider
[ISP] has provided them with IP address, Subnet Mask and
Default Gateway details)
Note: Contact your ISP if you need more
information about these settings.
•
Create or conrm your mesh router’s SSID (default is Guest).
Guest