Table of Contents
- AC750 Dual Band WiFi Range Extender
- Table of Contents
- 1. Overview
- 2. Get Started
- 3. Network Settings
- View Connected Devices
- Boost Your Video Streaming With FastLane Technology
- View WiFi Settings
- Change the WiFi Network Names
- Turn Off the SSID Broadcast to Create a Hidden Network
- Disable or Enable the WiFi Radios
- Change the WiFi Speed
- Use WPS to Add a Computer to the Extender’s WiFi Network
- Deny Access to a Computer or WiFi Device
- Set Up an Access Schedule
- Change the Extender’s Device Name
- Set Up the Extender to Use a Static IP Address
- Use the Extender With MAC Filtering or Access Control
- 4. Maintain and Monitor the Extender
- Change the Extender User Name and Password
- Turn Password Protection Off and On
- Recover a Forgotten User Name or Password
- Automatically Adjust for Daylight Saving Time
- Manually Set the Extender Clock
- Back Up and Manage the Extender Configuration
- Return the Extender to Its Factory Default Settings
- Update the Firmware
- Restart the Extender Remotely
- 5. FAQs and Troubleshooting
- A. Factory Settings and Technical Specifications
NETGEAR EX6000 User Manual
Displayed below is the user manual for EX6000 by NETGEAR which is a product in the Network Extenders category. This manual has pages.
Related Manuals
350 East Plumeria Drive
San Jose, CA 95134
USA
September 2015
202-11554-01
AC750 Dual Band
WiFi
Range Extender
Model EX6000
User Manual
2
AC750 Dual Band WiFi Range Extender
Support
Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help,
access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR
support resources.
Conformity
For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621.
Compliance
For regulatory compliance information, visit http://www.netgear.com/about/regulatory.
See the regulatory compliance document before connecting the power supply.
Trademarks
© NETGEAR, Inc. NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are
used for reference purposes only.
3
Table of Contents
Chapter 1 Overview
Meet Your Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Side Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
When to Use Your Extender. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
How the Extender Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Chapter 2 Get Started
Use the Extender in Extender Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Place the Extender and Apply Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Check for Extender Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connect to an Existing WiFi Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Find the Best Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connect an Ethernet-Enabled Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Use the Extender in Access Point Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Log In to the Extender After Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Run Smart Setup Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Chapter 3 Network Settings
View Connected Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Boost Your Video Streaming With FastLane Technology. . . . . . . . . . . . . . . . . . . 20
View WiFi Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Change the WiFi Network Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Turn Off the SSID Broadcast to Create a Hidden Network . . . . . . . . . . . . . . . . . 23
Disable or Enable the WiFi Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Change the WiFi Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Use WPS to Add a Computer to the Extender’s WiFi Network. . . . . . . . . . . . . . 26
Use WPS With the Push Button Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Use WPS With the PIN Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Deny Access to a Computer or WiFi Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Set Up an Access Schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Change the Extender’s Device Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Set Up the Extender to Use a Static IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Use the Extender With MAC Filtering or Access Control. . . . . . . . . . . . . . . . . . . 33
Chapter 4 Maintain and Monitor the Extender
Change the Extender User Name and Password. . . . . . . . . . . . . . . . . . . . . . . . . . 35
Turn Password Protection Off and On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4
AC750 Dual Band WiFi Range Extender
Recover a Forgotten User Name or Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Automatically Adjust for Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Manually Set the Extender Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Back Up and Manage the Extender Configuration . . . . . . . . . . . . . . . . . . . . . . . . 38
Back Up the Configuration Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Restore the Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Return the Extender to Its Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . 40
Update the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Restart the Extender Remotely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Chapter 5 FAQs and Troubleshooting
FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Cannot Connect to the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Cannot Join a WiFi Network and Receive an Error Message . . . . . . . . . . . . . . . . 46
Appendix A Factory Settings and Technical Specifications
Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Technical and Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
5
1
1. Overview
The NETGEAR WiFi Range Extender increases the distance of a WiFi network by boosting the
existing WiFi signal and enhancing the overall signal quality over long distances. An extender
repeats the signals from an existing WiFi router or access point.
This chapter covers the following topics:
•Meet Your Extender
•When to Use Your Extender
•How the Extender Works
Note: For more information about the topics covered in this manual, visit the
support website at support.netgear.com.
Note: Firmware updates with new features and bug fixes are made
available from time to time at downloadcenter.netgear.com. Some
products can regularly check the site and download new firmware, or
you can check for and download new firmware manually.
Overview
6
AC750 Dual Band WiFi Range Extender
Meet Your Extender
Before you install your extender, familiarize yourself with its LEDs, buttons, and port.
Front Panel
Power LED
WPS/Mode LED
Router
Link LED Device
Link LED
Figure 1. Front panel LEDs
The following table describes the LEDs.
Table 1. Front panel LEDs
LED Description
Router Link LED
This LED indicates the connection between the extender and the router or
access point:
• Solid green. Best connection.
• Solid amber. Good connection.
• Solid red. Poor connection.
• Off. No connection.
Device Link LED This LED indicates the connection between the extender and a computer or WiFi
device:
• Solid green. Best connection.
• Solid amber. Good connection.
• Solid red. Poor connection.
• Off. No connection.
Overview
7
AC750 Dual Band WiFi Range Extender
Side Panels
Factory
Reset
Button
WPS/Mode button
Power On/Off
Power connector
(varies by region)
Ethernet port
Power connector
(varies by region)
button
Figure 2. Buttons and port on the side panels
When to Use Your Extender
We recommend that you connect through the extender network only when the WiFi device is
in a “dead zone” where the connection from the existing network is poor or nonexistent. Data
traffic routed through the extender is inherently slower than traffic routed directly from the
network.
Power LED • Solid amber. The extender is booting.
• Solid green. The extender is powered on.
• Blinking green. The extender is switching between extender mode and
access point mode.
• Off. The extender is powered off.
WPS/Mode LED • Solid green. The extender is in extender mode.
• Blinking green. A WPS connection is being established or the extender is
switching between extender mode and access point mode.
• Off. The extender is in access point mode.
Table 1. Front panel LEDs (continued)
LED Description
Overview
8
AC750 Dual Band WiFi Range Extender
How the Extender Works
The extender works like a bridge between a WiFi router (or a WiFi access point) and a WiFi
device outside the range of the WiFi router. The extender performs two main jobs:
•The extender connects to a working WiFi network.
When the extender connects over WiFi to an existing network, it functions as a network
client, similar to how a WiFi device connects to a network.
•The extender acts as an access point for WiFi devices.
The extender broadcasts its own WiFi network that WiFi devices can join. In its role as an
access point, the extender performs tasks that WiFi routers do, such as broadcasting its
network name (SSID).
The extender must do each of these jobs so that both ends of the bridge are in place.
Existing WiFi
Sometimes your
router does not
provide the WiFi
coverage that you
need.
WiFi Range Extender
Boosts the range of
your existing WiFi and
creates a stronger
signal in hard-to-reach
areas.
Figure 3. Range extender in a home
Get Started
10
AC750 Dual Band WiFi Range Extender
Use the Extender in Extender Mode
Place the extender, apply power, and connect the extender to your WiFi network.
Note: You can also use the extender as a WiFi access point and create a
new WiFi hotspot by using a wired Ethernet connection. See Use the
Extender in Access Point Mode on page 15.
Place the Extender and Apply Power
To place the extender and apply power:
1. Place your extender in the same room as your WiFi router.
Proximity to the WiFi router is required only during the initial setup process.
2. Plug the extender into an electrical outlet.
3. Wait for the Power LED to light amber and then turn green.
If the Power LED does not light, press the Power On/Off button on the side of the
extender.
Check for Extender Mode
To make sure that the extender is in extender mode, check to see if the WPS/Mode LED is
solid green. If the WPS/Mode LED is off, press the WPS/Mode button for more than five
seconds.
When the extender is in extender mode, the WPS/Mode LED and Power LED blink and then
light solid green.
Connect to an Existing WiFi Network
To extend the range of your WiFi network, you must connect the extender to your existing
WiFi network. You can do this in one of two ways:
•Connect with WPS. For more information, see Connect With WPS on page 11.
•Connect with web browser setup. For more information, see Connect With Web
Browser Setup on page 12.
Get Started
11
AC750 Dual Band WiFi Range Extender
Connect With WPS
Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the network
name and password.
Note: WPS does not support WEP network security. If you are using WEP
security, follow the instructions in Connect With Web Browser Setup
on page 12.
To use WPS to connect the extender to your WiFi router:
1. Press the WPS/Mode button on the extender for less than five seconds until the
WPS/Mode LED blinks.
Note: If you press the WPS/Mode button for more than five seconds, the
extender switches to access point mode. When the extender switches
to access point mode, the WPS/Mode LED and Power LED blink and
then the WPS/Mode LED turns off and the Power LED lights solid
green.
2. Within two minutes, press the WPS button on your router or access point.
When the extender connects to your existing WiFi network, the WPS/Mode LED on the
extender lights solid green and the Router Link LED lights. If the Router Link LED does
not light, try again. If it still does not light, see Connect With Web Browser Setup on
page 12.
3. If your WiFi router supports the 5 GHz band, repeat Steps 1 and 2 to connect the extender
to the 5 GHz band.
4. Unplug the extender and move it to a new location that is about halfway between your router
and the area with a poor router WiFi signal.
The location that you choose must be within the range of your existing WiFi router
network.
5. Plug the extender into an electrical outlet and wait for the Power LED to light green.
6. Use the Router Link LED to help you choose a spot where the extender-to-router connection
is optimal.
7. If the Router Link LED doesn’t light amber or green, plug the extender into an outlet closer
to the router and try again.
Get Started
12
AC750 Dual Band WiFi Range Extender
Keep moving the extender to outlets closer to the router until the Router Link LED lights
amber or green.
8. On your computer or WiFi device, find and connect to the new extended WiFi network.
The extender creates two new extended WiFi networks. The extender’s new WiFi
network names are based on your existing WiFi network name, with _2GEXT and
_5GEXT at the end of the name.
For example:
•Existing WiFi network name. MyNetworkName
•New extended network names. MyNetworkName_2GEXT and
MyNetworkName_5GEXT
Use the same WiFi password that you use for your WiFi router.
9. Test the extended WiFi range by moving your computer or WiFi device to the area with a
poor router WiFi signal:
a. Leave your computer or WiFi device in the area with a poor router WiFi signal and
return to the extender.
b. Check the Device Link LED on the extender:
•If the Device Link LED is solid green or amber, your extended WiFi network
reaches the area with a poor router WiFi signal and your network setup is
complete.
•If the Device Link LED is red, your extended WiFi network does not reach the area
with a poor router WiFi signal.
You must move the computer or WiFi device closer to the extender until the
Device Link LED turns solid green or amber.
Connect With Web Browser Setup
You can use a web browser to log in to the extender and set up its WiFi connection to your
existing WiFi router.
To connect with web browser setup:
1. Use a WiFi network manager on a computer or WiFi device to find and connect to the
extender WiFi network NETGEAR_EXT.
After the connection with the computer or WiFi device is established, the Device Link LED
lights.
2. Launch web browser.
3. Enter www.mywifiext.net in the address field of the browser.
The New Extender Setup page displays.
Get Started
13
AC750 Dual Band WiFi Range Extender
4. Click the NEW EXTENDER SETUP button.
5. Complete the fields and click the NEXT button.
A message displays saying that the extender switch is set to extender mode.
6. Click the NO button if you want to continue with the extender mode setup.
The extender searches for WiFi networks in your area and displays a list.
7. Select a WiFi network to extend and click the NEXT button.
If you do not want to extend both WiFi bands, clear the 2.4 GHz WiFi Networks or the
5 GHz WiFi Networks check box.
8. In the Password (Network Key) field, type the existing WiFi network password (also called
passphrase or security key) and click the NEXT button.
9. Set the network name (SSID) and password for your new extender WiFi network and click
the NEXT button.
Wait for the page to display a list of available extended WiFi networks, which might take
up to one minute.
10. Use a WiFi network manager on the computer or WiFi device to connect to the new
extended WiFi network.
You must connect your computer or WiFi device before you click the Continue button.
11. Click the Continue button.
A message displays confirming that the extender is connected and ready.
12. Click the Next button.
The registration page displays.
13. Complete the registration fields and click the Finish button to complete the setup.
If you do not want to register your extender, click the Skip Registration link. Note that
you must register your extender before you can use NETGEAR telephone support.
The Status page displays.
Get Started
14
AC750 Dual Band WiFi Range Extender
14. Unplug the extender and move it to a location that is about halfway between your router and
the area with a poor router WiFi signal.
The location that you choose must be within the range of your existing WiFi router
network.
15. Plug the extender into an electrical outlet and wait for the Power LED to light green.
If the Power LED does not light, press the Power On/Off button.
16. Use the Router Link LED to help you choose a spot where the extender-to-router connection
is optimal.
17. If the Router Link LED doesn’t light amber or green, plug the extender into an outlet closer
to the router and try again.
Keep moving the extender to outlets closer to the router until the Router Link LED lights
amber or green.
18. Reconnect your computer or WiFi device to the new extended WiFi network.
19. Test the extended WiFi range by moving your computer or WiFi device to the area with a
poor router WiFi signal:
a. Leave your computer or WiFi device in the area with a poor router WiFi signal and
return to the extender.
b. Check the Device Link LED on the extender:
•If the Device Link LED is solid green or amber, your extended WiFi network
reaches the area with a poor router WiFi signal and your network setup is
complete.
•If the Device Link LED is red, your extended WiFi network does not reach the area
with a poor router WiFi signal.
You must move the computer or WiFi device closer to the extender until the
Device Link LED turns solid green or amber.
Find the Best Location
If the WiFi signal is weak, the first time you join the extender network, the Router Link LED or
Device Link LED is amber or red. If this happens, adjust the position of the extender:
•If the Router Link LED is amber or red, move the extender closer to the router.
•If the Device Link LED is amber or red, move the computer or WiFi device closer to the
extender.
Get Started
15
AC750 Dual Band WiFi Range Extender
Connect an Ethernet-Enabled Device
After the extender is connected to your existing WiFi network, you can connect a wired
device to the extender using an Ethernet cable. The device can then access your existing
network through the extender’s WiFi connection.
Figure 4. Connect a device to the extender’s Ethernet port
Use the Extender in Access Point Mode
You can use the extender as a WiFi access point, which creates a new WiFi hotspot by using
a wired Ethernet connection.
Figure 5. Extender in access point mode
Get Started
16
AC750 Dual Band WiFi Range Extender
To use the extender in access point mode:
1. Use an Ethernet cable to connect the Ethernet port on the extender to an Ethernet LAN
port on a router or a remote Ethernet LAN jack with LAN access.
2. Plug the extender into an electrical outlet and wait for the Power LED to light green.
3. If the Power LED does not light, press the Power On/Off button on the extender.
4. To make sure that the extender is in access point mode, check to see if the WPS/Mode LED
is off.
5. If the WPS/Mode LED is lit, press the WPS/Mode button for more than five seconds.
While the extender switches to access point mode, the WPS/Mode LED and Power LED
blink for up to 50 seconds. When the extender is in access point mode, the WPS/Mode
LED turns off and the Power LED lights solid green
6. Use a WiFi network manager on a computer or WiFi device to find and connect to the
NETGEAR_EXT (SSID) WiFi network.
After the connection with the computer or WiFi device is established, the Device Link LED
lights.
7. Launch a web browser and enter www.mywifiext.net in the address field.
The New Extender Setup page displays.
8. Click the NEW EXTENDER SETUP button.
9. When prompted, complete the fields on the page to set up your login credentials and click
the NEXT button.
A message displays that the extender is set to access point mode.
10. Click the NO button if you want to continue with the access point mode setup.
11. Set the network name (SSID), security option, and password for each access point network
and click the NEXT button.
Your settings are applied and the extender is ready to be used as an access point.
12. Use a WiFi network manager on the computer or WiFi device to connect to the new access
point WiFi network.
13. Click the Continue button.
A page displays that says you successfully created an access point.
14. Click the Next button.
The registration page displays.
15. Follow the onscreen instructions to register your extender.
Get Started
17
AC750 Dual Band WiFi Range Extender
Log In to the Extender After Installation
After installation, you can log in to the extender to view or change the extender’s settings.
To log in to the extender:
1. Use a WiFi network manager on a computer or WiFi device to find and connect to the
new extended WiFi network.
After the connection with the computer or WiFi device is established, the Device Link LED
lights solid green.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your email address and password and click the LOG IN button.
The Status page displays.
Run Smart Setup Installation
You can use Smart Setup to change the extender settings. This is an easy way to connect the
extender to a different router or to change the extender WiFi network name (SSID) or WiFi
password.
To run Smart Setup:
1. Use a WiFi network manager on a computer or WiFi device to find and connect to the
new extended WiFi network.
After the connection with the computer or WiFi device is established, the Device Link LED
lights solid green.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your email address and password and click the LOG IN button.
The Status page displays.
5. Click the SMART SETUP button.
The Welcome page displays.
6. Click the WIFI RANGE EXTENDER button.
The extender scans for WiFi signals and finds the WiFi networks in your area and
displays a list.
7. Select your WiFi network and click the NEXT button.
Get Started
18
AC750 Dual Band WiFi Range Extender
8. When prompted, enter the password to connect to your WiFi network and click the NEXT
button.
A message displays when the extender connects to your existing router’s WiFi network.
9. Click the NEXT button.
The extender applies your settings to its WiFi network names and WiFi passwords.
During this change, the extender disconnects you from its WiFi network.
10. When prompted, connect your WiFi devices to the extender WiFi network and click the
CONTINUE button.
The registration page displays.
11. Complete the registration fields and click the FINISH button to complete the setup.
If you do not want to register your extender, click the Skip Registration link. Note that
you must register your extender before you can use NETGEAR telephone support.
The Status page displays.
19
3
3. Network Settings
This chapter covers the following topics:
•View Connected Devices
•Boost Your Video Streaming With FastLane Technology
•View WiFi Settings
•Change the WiFi Network Names
•Turn Off the SSID Broadcast to Create a Hidden Network
•Disable or Enable the WiFi Radios
•Change the WiFi Speed
•Use WPS to Add a Computer to the Extender’s WiFi Network
•Deny Access to a Computer or WiFi Device
•Set Up an Access Schedule
•Change the Extender’s Device Name
•Set Up the Extender to Use a Static IP Address
•Use the Extender With MAC Filtering or Access Control
Network Settings
20
AC750 Dual Band WiFi Range Extender
View Connected Devices
You can view a list of devices that are connected to the extender network.
To view connected devices:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Connected Devices.
Boost Your Video Streaming With FastLane Technology
Get the most out of your HD entertainment with FastLane technology. With FastLane
technology, the extender connects to your router using one band and connects to your
devices using another band. Because a band is dedicated to each function, performance is
enhanced.
If all your devices and your WiFi router support only the 2.4 GHz band, or all your devices
and your WiFi router support only the 5 GHz band, do not enable FastLane Technology.
Network Settings
21
AC750 Dual Band WiFi Range Extender
When you enable FastLane Technology, two options are available:
•Use the 2.4 GHz band to connect the extender to the WiFi devices and use the 5 GHz
band to connect the extender to the WiFi router. Use this mode if your WiFi router
supports the 5 GHz band but the devices that you want to use for gaming and streaming
support the 2.4 GHz band.
•Use the 5 GHz band to connect the extender to the WiFi devices and use the 2.4 GHz
band to connect the extender to the WiFi router. Use this mode if the devices that you
want to use for gaming and streaming support the 5 GHz band but your WiFi router
supports the 2.4 GHz band.
To activate FastLane mode:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Do More > FastLane.
6. Select the FastLane Technology radio button.
The page adjusts and displays two more radio buttons.
7. Select a radio button:
•Router-to-Extender in 2.4 GHz only and Extender-to-Device in 5 GHz only
•Router to Extender in 5 GHz only and Extender-to-Device in 2.4 GHz only
Network Settings
22
AC750 Dual Band WiFi Range Extender
8. Click the SAVE button.
Your settings are saved.
View WiFi Settings
To view the WiFi settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Wireless.
Change the WiFi Network Names
To change the WiFi network names:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
Network Settings
23
AC750 Dual Band WiFi Range Extender
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Wireless.
6. In each Network Name (SSID) field, type a network name.
7. Click the SAVE button.
Your settings are saved.
Turn Off the SSID Broadcast to Create a Hidden Network
By default, the extender broadcasts its WiFi signal so that its WiFi network names (SSIDs)
are easy for you to find and connect to from your computer, tablet, or smartphone. You can
turn off the SSID broadcast to create a hidden WiFi network. To connect to a hidden network
you must know its SSID and password and manually enter them.
To turn off the SSID broadcast to create a hidden network:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
Network Settings
24
AC750 Dual Band WiFi Range Extender
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Wireless.
6. Clear the Broadcast the Network name (SSID) check box for each network.
7. Click the SAVE button.
Your settings are saved.
Disable or Enable the WiFi Radios
By default, the extender’s WiFi radios broadcast signals in the 2.4 GHz and 5 GHz bands. If
you disable the WiFi radios, then no one can connect with WiFi to the extender.
To enable or disable the WiFi radios:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
Network Settings
25
AC750 Dual Band WiFi Range Extender
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Wireless.
6. Select or clear the Enable 2.4 GHz WiFi check box.
7. Select or clear the Enable 5 GHz WiFi check box.
8. Click the SAVE button.
Your settings are saved.
Change the WiFi Speed
To change the WiFi speed:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
Network Settings
26
AC750 Dual Band WiFi Range Extender
5. Select Settings > Wireless.
6. In each WiFi Speed menu, select a speed.
7. Click the SAVE button.
Your settings are saved.
Use WPS to Add a Computer to the Extender’s WiFi
Network
WPS (WiFi Protected Setup) lets you connect a computer or WiFi device to the extender’s
network without entering the WiFi network passphrase or key. Instead, you use a WPS button
or enter a PIN to connect.
If you use the push button method, the WiFi device that you are trying to connect must
include a physical button or a software button. If you use the PIN method, you must know the
PIN of the WiFi device that you are trying to connect.
WPS supports WPA and WPA2 WiFi security. If your extender network is open (no WiFi
security is set), connecting with WPS automatically sets WPA + WPA2 WiFi security on the
extender network and generates a random passphrase. You can view this passphrase on the
WiFi Settings page (for more information, see View WiFi Settings on page 22).
For information about using WPS to connect the extender to a WiFi network during setup,
see Use the Extender in Access Point Mode on page 15.
Network Settings
27
AC750 Dual Band WiFi Range Extender
Use WPS With the Push Button Method
For you to use the push button method to connect a WiFi device to the extender’s WiFi
network, the WiFi device that you are trying to connect must include a physical WPS button
or an onscreen WPS button that you can click.
To use WPS to add a computer or WiFi device to the extender’s WiFi network:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Do More > Connect Devices (WPS).
6. Leave the Push Button (recommended) radio button selected.
7. Click the WIFI PROTECTED SETUP (WPS) button.
For two minutes, the extender attempts to add the computer or WiFi device to its WiFi
network.
8. Within two minutes, go to the computer or WiFi device and press or click its WPS button.
9. To verify that the WiFi device is connected to the extender’s WiFi network, select
Settings > Connected Devices.
The WiFi device displays onscreen.
Network Settings
28
AC750 Dual Band WiFi Range Extender
Use WPS With the PIN Method
To use the PIN method to connect a WiFi device to the extender’s WiFi network, you must
know the PIN of the WiFi device that you are trying to connect.
To add a computer or WiFi device to the extender’s WiFi network:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Do More > Connect Devices (WPS).
The Connect Devices (WPS) page displays.
6. Select the PIN Number radio button.
7. Type the PIN of the WiFi device in the field.
8. Click the NEXT button.
For four minutes, the extender attempts to find the computer or WiFi device.
9. Within four minutes, go to the WiFi device and use its WPS software to join the WiFi
network.
10. To verify that the WiFi device is connected to the extender’s WiFi network, select
Settings > Connected Devices.
The WiFi device displays onscreen.
Network Settings
29
AC750 Dual Band WiFi Range Extender
Deny Access to a Computer or WiFi Device
By default, access control is disabled so that it is easy for you to connect to the extender’s
WiFi networks.
You can deny network access to specific computers and WiFi devices based on their MAC
addresses. Each network device is assigned a MAC address, which is a unique 12-character
physical address, containing the hexadecimal characters 0–9, a–f, or A–F only, and
separated by colons (for example, 00:09:AB:CD:EF:01). Typically , the MAC address is on the
label of the WiFi device. If you cannot access the label, you can display the MAC address
using the network configuration utilities of the computer. You might also find the MAC
addresses on the Connected Devices page (see View Connected Devices on page 20).
To use WiFi access control to deny access:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Connected Devices.
6. In the WiFi Devices section, select the Enable Access Control check box.
Network Settings
30
AC750 Dual Band WiFi Range Extender
The WiFi devices table displays the names and MAC addresses of WiFi devices that are
connected to the extender.
7. Select the Deny check box for the device.
8. Click the SAVE button.
Your settings are saved and that device cannot connect to the extender’s WiFi network.
Set Up an Access Schedule
You can control access to all users during specific periods of the day. You can set up an
access schedule that prevents Internet access through the extender network based on the
times that you set.
To set up an access schedule:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Do More > Access Schedule.
6. Select the Access Schedule On radio button.
The page adjusts.
Network Settings
31
AC750 Dual Band WiFi Range Extender
7. In the Days menu and the Time menu, select the day and time when you want to disable
Internet access.
8. Click the Add Time button to add the time that you specified to the Scheduled Times table.
9. Click the SAVE button.
Your settings are saved.
Change the Extender’s Device Name
The default name is EX6000.
To change the extender’s device name:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Wireless.
The WiFi Settings page displays.
6. Scroll down and expand the IP Address heading.
7. In the Device Name field, type a name.
8. Click the SAVE button.
Your settings are saved.
Network Settings
32
AC750 Dual Band WiFi Range Extender
Set Up the Extender to Use a Static IP Address
The extender comes set up to use a dynamic IP address, which is the correct setting for most
home networks.
To set up the extender to use a static IP address:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Wireless.
The WiFi Settings page displays.
6. Scroll down and expand the IP Address heading.
By default, the Dynamically get IP Address From Router radio button is selected.
7. Select the Use Static IP Address radio button.
8. Complete the fields to specify the IP network IP addresses.
9. Click the SAVE button.
Your settings are saved.
Network Settings
33
AC750 Dual Band WiFi Range Extender
Use the Extender With MAC Filtering or Access Control
When the WiFi device connects through the extender to your router, the MAC address of the
WiFi device that is shown on the router is translated to another MAC address. If your router’s
MAC filter, WiFi access control, or ACL is enabled, the WiFi device connects to the extender
but cannot get an IP address from the extender and cannot access the Internet. To allow the
WiFi device to receive an IP address from the extender and access the Internet, you must
provide the translated MAC address to the router.
To add a translated MAC address to your router:
1. Log in to your router and disable the MAC filter, WiFi access control, or ACL.
For information about how to disable your router’s MAC filter, WiFi access control, or
ACL, see your router’s documentation.
2. Power on the extender and connect all of your WiFi devices to the extender.
3. Make sure that the Link Rate LED remains lit.
4. Log in to your extender:
a. Launch a web browser.
b. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
c. Enter your email address and password and click the LOG IN button.
5. Click the Menu icon .
The extender menu displays.
6. Select Settings > Connected Devices.
The Connected Devices section displays the MAC addresses and virtual MAC addresses
for computers and WiFi devices that are connected to the extender network.
7. On the router, add the extender ’s virtual MAC address and all the virtual MAC addresses
connected to the extender network to your router ’s MAC filter table.
8. Enable the router ’s MAC filter, WiFi access control, or ACL.
34
4
4. Maintain and Monitor the Extender
This chapter covers the following topics:
•Change the Extender User Name and Password
•Turn Password Protection Off and On
•Recover a Forgotten User Name or Password
•Automatically Adjust for Daylight Saving Time
•Manually Set the Extender Clock
•Back Up and Manage the Extender Configuration
•Back Up the Configuration Settings
•Return the Extender to Its Factory Default Settings
•Update the Firmware
•Restart the Extender Remotely
Maintain and Monitor the Extender
35
AC750 Dual Band WiFi Range Extender
Change the Extender User Name and Password
You can change the user name and password to log in to the extender.
To add an extender user:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Password.
6. In the New User Name field, type an email address.
7. Type the password in the New Password field and the Verify Password field.
8. Select questions and enter the answers.
9. Click the SAVE button.
Your settings are saved.
Maintain and Monitor the Extender
36
AC750 Dual Band WiFi Range Extender
Turn Password Protection Off and On
We recommend that you leave password protection on to help keep your network secure.
You can turn password protection off and on.
To turn password protection off or on:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Password Settings.
The Password Settings page displays.
6. Select the Password Off or Password On radio button.
7. Click the SAVE button.
Your settings are saved.
Recover a Forgotten User Name or Password
If you changed the password to access the extender and set up password recovery, you can
recover your password if you lose it.
To recover your password to access the extender:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
You are prompted to enter a user name and password.
3. Click the Username & Password Help link.
A page displays requesting the answers to your security questions.
If you forgot the answers to your security questions, restore the extender’s factory
settings and set up your login credentials again. See Return the Extender to Its Factory
Default Settings on page 40 and Chapter 2, Get Started.
4. Enter the saved answers to your security questions.
Maintain and Monitor the Extender
37
AC750 Dual Band WiFi Range Extender
5. Click the NEXT button.
Your email and password are displayed.
6. Click the BACK button.
A login window opens.
7. Log in to the extender.
Automatically Adjust for Daylight Saving Time
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Do More > Access Schedule.
The Access Schedule page displays.
6. Select the Automatically adjust for daylight savings time check box.
7. Click the SAVE button.
Your settings are saved.
Manually Set the Extender Clock
To manually set the extender clock:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Do More > Access Schedule.
Maintain and Monitor the Extender
38
AC750 Dual Band WiFi Range Extender
The Access Schedule page displays.
6. In the Extender Clock section, select the Manual radio button.
7. To specify the time, complete the fields or click the Sync Clock button to synchronize the
extender time to the time on the computer or WiFi device that you are using.
8. Click the SAVE button.
Your settings are saved.
Back Up and Manage the Extender Configuration
When the extender works correctly after initial setup, we recommend that you back up the
extender configuration settings. After you back up the settings, if you change the extender
configuration settings but are not content with the new settings, you can restore the extender
configuration to the backed-up settings.
Back Up the Configuration Settings
You can back up the configuration file of the extender.
To back up the extender configuration settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Other.
6. Click the BACKUP button.
Your browser extracts the configuration file from the extender. By default, the name of the
backup file is NETGEAR_Ex6000.cfg.
Maintain and Monitor the Extender
39
AC750 Dual Band WiFi Range Extender
7. If your browser is not set up to save downloaded files automatically, locate where you want
to save the file.
8. Click the OK button.
The extender configuration settings are backed up.
Restore the Configuration Settings
You can restore the configuration file of the extender to a previously saved configuration file.
To restore the extender configuration settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Other.
6. Click the BROWSE button.
7. Locate and select the previously saved backup file.
By default, the name of the backup file is NETGEAR_EX6000.cfg.
CAUTION:
After you click the RESTORE button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting.
8. Click the RESTORE button.
A confirmation pop-up window opens.
Maintain and Monitor the Extender
40
AC750 Dual Band WiFi Range Extender
9. Confirm your decision.
The extender configuration is restored and the extender restarts. This process takes
about one minute.
Return the Extender to Its Factory Default Settings
Under some circumstances (for example, if you lose track of the changes that you made to
the extender settings), you might want to erase the configuration and reset the extender to
factory default settings.
To reset the extender to factory default settings, you can either use the Factory Reset button
on the side panel or log in to the extender and reset it.
For a list of factory default settings, see Factory Default Settings on page 48.
To use the Factory Reset button to return the extender to factory default settings:
CAUTION:
This process erases any settings that you configured in the extender.
1. Insert a straightened paper clip into the hole of the Factory Reset button and hold it for
about seven seconds.
Factory Reset button
2. Release the button.
CAUTION:
Do not try to go online, turn off the extender, shut down the computer, or
do anything else to the extender until it finishes restarting.
The extender resets and restarts. This process takes about one minute.
Maintain and Monitor the Extender
41
AC750 Dual Band WiFi Range Extender
To log in to the extender and reset the extender to factory settings:
CAUTION:
This process erases any settings that you configured in the extender.
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Other Settings.
CAUTION:
After you click the RESET button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting.
6. Click the RESET button.
A confirmation pop-up window opens.
7. Confirm your decision.
The extender returns to its factory settings and restarts. This process takes about one
minute.
Maintain and Monitor the Extender
42
AC750 Dual Band WiFi Range Extender
Update the Firmware
Unless you changed the settings in the Firmware Update page previously, the extender is set
up to check for new firmware automatically at login.
To check manually for new firmware and, if available, update the firmware:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Firmware Update.
6. Click the CHECK ONLINE button.
7. If new firmware is available, follow the onscreen prompts to download it onto your computer.
Note: You might need to unzip the firmware file.
8. Click the BROWSE button.
9. Locate and select the new firmware file.
The firmware file name ends with a .chk extension.
CAUTION:
After you click the UPLOAD button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting.
10. Click the UPLOAD button.
The firmware update starts and the extender restarts. The firmware update process takes
about two minutes.
Maintain and Monitor the Extender
43
AC750 Dual Band WiFi Range Extender
Restart the Extender Remotely
You can log in to the extender and restart it. When the extender restarts, all computers and
WiFi devices that are connected to its WiFi network are automatically disconnected.
To restart the extender remotely:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
A login window opens.
3. Enter your email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Other Settings.
The Other Settings page displays.
6. Click the RESTART button and click the Yes button to confirm.
The extender restarts, which takes about two minutes.
FAQs and Troubleshooting
45
AC750 Dual Band WiFi Range Extender
FAQs
This section provides answers for difficulties you might experience with the extender.
The web browser setup keeps asking me for my network password (passphrase) or
security key, and I am sure that I entered the correct password. What can I do?
The extender is probably placed at the borderline of the range covered by the router or
access point. For more information about where to place the extender, see Find the Best
Location on page 14.
If you are using WEP security, make sure that you are typing the network password in the
correct field.
Can I set up the extender in extender mode if I connect it to the router or access point
with an Ethernet cable?
No. The extender is designed to use a WiFi connection to the router or access point if it is in
extender mode. If the extender is in access point mode, you can connect it to the router or
access point with an Ethernet connection. For more information about access point mode,
see Use the Extender in Access Point Mode on page 15.
I forgot my login email address and password. What can I do?
In the login window, click the Username & Password Help link and answer the security
questions that you set up during the initial setup. For more information, see Recover a
Forgotten User Name or Password on page 36.
If you forgot the answers to your security questions, you can restore the extender’s factory
settings and perform setup again.
To restore factory settings:
1. Use a sharp object such as a pen or paper clip to press and hold the Factory Reset
button on the extender for seven seconds until the Power LED lights amber.
2. Release the Factory Reset button and wait for the extender to reboot.
The extender resets and returns to the factory default settings.
Cannot Connect to the Extender
If you cannot connect to the extender, determine what prevents you from connecting:
•If you forgot your user name or password, click the Username & Password Help link.
For more information, see FAQs on page 45.
•If your browser displays an error page, include http:// in the address field of your browser
by typing http://www.mywifiext.net.
•If you already set up the extender but can no longer connect to it over WiFi, check to see
if the Device Link LED is off or red. If it is, try moving your computer or WiFi device closer
to the extender.
FAQs and Troubleshooting
46
AC750 Dual Band WiFi Range Extender
•If you cannot get a WiFi connection working, you can use an Ethernet cable to connect
your computer to the extender.
Cannot Join a WiFi Network and Receive an Error Message
To join a WiFi network, you must know its network name (also called the SSID) so that you
can select it. If the network is secure, you must know the passphrase or key. If the extender
does not connect to the network that you select, the cause might be one of the following:
•It is possible that you typed the network name, passphrase, or key incorrectly. Use Smart
Setup (see Run Smart Setup Installation on page 17) to select a WiFi network and retype
the passphrase or key. The passphrase or key is case-sensitive. For example,
PASSWORD25 is not the same as Password25 or password25.
•If the extender cannot detect your WiFi network, check to see if your WiFi network is still
working. Make sure that the WiFi router is turned on. If possible, move the extender
closer to the WiFi router.
•If the extender Device Link LED is red, the WiFi connection between the WiFi router and
the extender is poor. You can establish the best connection with a clear line of sight
between the extender and the WiFi router. Make sure that no physical obstacles exist
between the extender and the WiFi router , and try to move the extender closer to the WiFi
router.
If you use Smart Setup, and the extender does not connect to the WiFi router, does not
connect to the Internet, or cannot get an IP address from the WiFi router, Smart Setup
displays a message to notify you that the extender is not configured.
To run Smart Setup again, click the YES button. To manually configure the extender, click the
NO, CONFIGURE MANUALLY button.
Factory Settings and Technical Specifications
48
AC750 Dual Band WiFi Range Extender
Factory Default Settings
To reset the extender to factory default settings, you can use the Factory Reset button on
the side panel or you can log in and click the onscreen RESET button. For more information,
see Return the Extender to Its Factory Default Settings on page 40.
The following table shows the factory default settings.
Table 2. Factory default settings
Feature Default Settings
Smart Setup Enabled
WiFi communication Enabled
WiFi network name (SSID) NETGEAR_EXT
Security Disabled
Transmission speed Auto1
1. Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network
overhead lower actual data throughput rate.
Country/region Varies by region
Operating mode 802.11a/b/g/n/ac
Data rate in the 2.4 GHz band 54/145/300 Mbps
Data rate in the 5 GHz band 54/145/300/433 Mbps
DHCP Client enabled
Factory Settings and Technical Specifications
49
AC750 Dual Band WiFi Range Extender
Technical and Environmental Specifications
The following table shows the technical and environmental specifications.
Table 3. Technical specifications
Technical Specifications
Network protocol and
standards compatibility Data and routing protocols: TCP/IP, DHCP server and client, DNS relay,
Physical specifications • Dimensions: 55.17 x 67.17 x 39 mm (2.17 x 2.64 x 1.54 in.)
• Weight: 130 g (0.29 lb)
Environmental • Operating temperature: 32° to 140°F (0° to 40°C)
• Operating humidity: 90% maximum relative humidity, noncondensing
Interface • Local: 10BASE-T, 100BASE-TX, RJ-45
• 802.11ac, 802.11a, 802.11n, 802.11g, 802.11b