NETGEAR GS516UP User Manual
Displayed below is the user manual for GS516UP by NETGEAR which is a product in the Network Switches category. This manual has pages.
Related Manuals
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
Installation Guide
16-Port Gigabit Ethernet Unmanaged
Ultra60 PoE++ Switch, Model GS516UP
24-Port Gigabit Ethernet Unmanaged
Ultra60 PoE++ Switch, Model GS524UP
Package contents
• SwitchmodelGS516UPorGS524UP
• Powercord(variesbyregion)
• Rack-mountkit
• Fourrubberfeet
• InstallationguideandInsightyer
Note: WerecommendthatyouuseaCategory5e(Cat5e)cableorhigher-ratedcablefor
GigabitEthernetconnections.
Thisswitchisdesignedforindooruseonly.Ifyouwanttoconnecttoadevicelocated
outdoors,theoutdoordevicemustbeproperlygroundedandsurgeprotected,andyou
mustinstallanEthernetsurgeprotectorinlinebetweentheswitchandtheoutdoordevice.
Failuretodosocandamagetheswitch.
WARNING: Beforeconnectingthisswitchtooutdoorcablesordevices,see
https://kb.netgear.com/000057103forsafetyandwarrantyinformation.
1. Register with the NETGEAR Insight app
1. SearchforNETGEAR Insightanddownloadthelatestapp.
2. SetupaNETGEARaccountifyoudonothaveone.
3. Tapthemenuintheupper-leftcorner.
4. TapREGISTER ANY NETGEAR DEVICE.
5. Entertheserialnumberlocatedonthebottomoftheswitch,orusethe
cameraonyourmobiledevicetoscantheserialnumberbarcode.
6. TapGO.
Theswitchisregisteredandaddedtoyouraccount.Youcannowviewthe
switchintheNETGEARInsightapp.
Note: Becausethisisanunmanagedswitch,youcannotcongureormanageit
inNETGEARInsight.
2. Connect the switch
PoE++LEDlighting Internet
GS524UPswitch
Sample connections
PoE++PTZcamera
PoE+securitycamera
Router
3. Check the LEDs
Whenyouconnectthepowercordtotheswitchandplugitintoanelectrical
outlet,theLEDsindicatethestatus.
LED Description
Power
Solid green.Theswitchispoweredonandoperatingnormally.
Off. Powerisnotsuppliedtotheswitch.
Fan
Off.Thefanisworkingcorrectly.
Solid yellow.Thefanisnotworkingcorrectly.
PoEMax
(Thestatusof
theswitch’sPoE
budget)
Off.Sufcient(morethan7Wof)PoEpowerisavailable.
Solid yellow.Lessthan7WofPoEpowerisavailable.
Blinking yellow.Atleastonceduringtheprevioustwominutes,less
than7WofPoEpowerwasavailable.
LeftportLED
Solid green.1000Mbpslinkonthisport.
Blinking green.1000Mbpsactivityonthisport.
Solid yellow.100Mbpsor10Mbpslinkonthisport.
Blinking yellow.100Mbpsor10Mbpsactivityonthisport.
Off.Nolinkisdetectedonthisport.
RightPortLED
Solid Green.TheportisdeliveringPoEpower..
Off.TheportisnotdeliveringPoEpower.
Solid yellow.APoEfaultoccurred.
PoE mode
The DIP switches on the front panel let you to select the following PoE++ modes:
• 802.3bt mode.Themodefordevicesthatarefullycompliantwith
IEEE802.3bt(PoE++).ThisisthedefaultmodeforallPoE++ports.
• pre-802.3bt mode.Themodefordevicesthatcanreceivepowerhigher
than30WbutthatarenotfullycompliantwithIEEE802.3bt(PoE++).
Continued on the next page.
Computer
Internet
PoE++
non-PoE
ModelGS516UPprovidesPoE++(802.3bt)poweronports1–8withupto60Wto
eachportandPoE+(802.3at)poweronports9–16withupto30Wtoeachport.The
totalPoEpowerbudgetfortheswitchis380WacrossallactivePoEports.
ModelGS524UPprovidesPoE++(802.3bt)poweronports1–16withupto60Wto
eachportandPoE+(802.3at)poweronports17–24withupto30Wtoeachport.
ThetotalPoEpowerbudgetfortheswitchis480WacrossallactivePoEports.
PoE++speaker
PoE+
PoE+accesspoint
ReadyNAS
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
Specications
Specication Model GS516UP Model GS524UP
RJ-45ports 16GigabitEthernetfor1Gbps,
100Mbps,and10Mbps.
24GigabitEthernetfor1Gbps,
100Mbps,and10Mbps.
PoE++ports 8(ports1–8) 16(ports1–16)
PoE+ports 8(ports9–16) 8(ports17–24)
MaximumPoEbudget 380Wfortheentireswitch 480Wfortheentireswitch
ACpowerinput 100–240V~50/60Hz,8–4A 100–240V~50/60Hz,8–4A
Dimensions(WxDxH) 13.0x8.2x1.7in.
(330x207x43mm)
15.4x8.7x1.7in.
(390x220x43mm)
Weight 5.73lb(2.6kg) 6.83lb(3.1kg)
Operatingtemperature 32–122°F(0–50°C)
Operatinghumidity 10%–90%relativehumidity,noncondensing
Compliance FCCclassA,UL62368-1,CB,CELVD,CEclassA,VCCIclassA,RCMclassA,
KC,BSMI
Support and Community
Visitnetgear.com/supporttogetyourquestionsansweredandaccessthelatest
downloads.
YoucanalsocheckoutourNETGEARCommunityforhelpfuladviceat
community.netgear.com.
Regulatory and Legal
SiceproduitestvenduauCanada,vouspouvezaccéderàcedocumentenfrançais
canadienàhttps://www.netgear.com/support/download/.
(IfthisproductissoldinCanada,youcanaccessthisdocumentinCanadianFrenchat
https://www.netgear.com/support/download/.)
ForregulatorycomplianceinformationincludingtheEUDeclarationofConformity,visit
https://www.netgear.com/about/regulatory/.
Seetheregulatorycompliancedocumentbeforeconnectingthepowersupply.
ForNETGEAR’sPrivacyPolicy,visithttps://www.netgear.com/about/privacy-policy.
Byusingthisdevice,youareagreeingtoNETGEAR’sTermsandConditionsat
https://www.netgear.com/about/terms-and-conditions.Ifyoudonotagree,returnthe
devicetoyourplaceofpurchasewithinyourreturnperiod.
Donotusethisdeviceoutdoors.ThePoEsourceisintendedforintrabuildingconnection
only.
PoE++Mode DIPSwitch
Position
Ports1–4 Ports5–8 Ports9–12
(GS524UPOnly)
Ports13–16
(GS524UPOnly)
802.3bt Up Default Default Default Default
pre-802.3bt Down Optional Optional Optional Optional
Forinformationaboutwhichmodetoselect,consultthedocumentationthat
camewiththepowereddevice(PD).Ifyouarenotsure,keepthedefaultmode.
However,ifthePDdoesnotpowerup,settheDIPswitchtothepre-802.3btmode.
PoE considerations
ThePoEpowerthattheswitchsuppliestopowereddevices(PDs)isprioritized
inascendingportorder.IfthepowerrequirementsfortheattachedPDsexceed
thetotalpowerbudgetoftheswitch,thePDonthehighest-numberedport
isdisabledtomakesurethatthePDsconnectedtothehigher-priority,lower-
numberedportsaresupportedrst.
APDlistedasan802.3btPoE++powereddevicedoesnotnecessarilyrequire
themaximumpowerlimitofthespecication.ManyPDsrequirelesspower,
potentiallyallowingallPoE++andPoE+portstobeactivesimultaneously.
Thefollowingtableshowsthestandardpowerrangescalculatedwiththe
maximumcablelengthof328feet(100meters).
Device
Class
CompatiblePoE
standard
ClassDescription MaximumPower
Suppliedbythe
Switch
Power
Deliveredto
thePD
0 PoE,PoE+,andPoE++ Defaultpower(full) 0.44W 0.44W–12.95W
1 PoE,PoE+,andPoE++ Verylowpower 4.0W 0.44W–3.84W
2 PoE,PoE+,andPoE++ Lowpower 7.0W 3.84W–6.49W
3PoE,PoE+,andPoE++ Midpower 15.4W 6.49W–12.95W
4 PoE+andPoE++ Highpower 30.0W 12.95W–25.5W
5–6 PoE++only Ultrapower 45.0W 25.5W–51W
IfadevicereceivesinsufcientPoEpowerfromtheswitch,considerusinga
shortercable.
PoE troubleshooting
HerearesometipsforcorrectingPoEproblemsthatmightoccur:
• IfthePoEMaxLEDissolidyellow,disconnectoneormorePoEdevicesto
preventPoEoversubscription.
• Foreachpowereddevice(PD)thatisconnectedtotheswitch,theassociated
PoELEDontheswitchlightssolidgreen.IfthePoELEDlightssolidyellow,a
PoEfaultoccurredandPoEhaltedbecauseofoneoftheconditionslistedin
thefollowingtable.
PoEFaultCondition PossibleSolution
APoE-relatedshortcircuitoccurredontheport.
Theproblemismostlikelywith
theattachedPD.Checkthe
conditionofthePD,orrestart
thePDbydisconnectingand
reconnectingthePD.
ThePoEpowerdemandofthePDexceededthemaximum
levelthattheswitchpermits.Themaximumlevelis15.4Wfor
aPoEconnection,30WforaPoE+connection,and60Wfora
PoE++connection.
ThePoEcurrentontheportexceededtheclassicationlimit
ofthePD.
ThePoEvoltageoftheportisoutsidetherangethatthe
switchpermits
Restarttheswitchtoseeifthe
conditionresolvesitself.
Mount the switch in a rack
Werecommendthatyouusethebracketsandscrewsthatcamewiththeswitch.
1. Attachthesuppliedmountingbracketstothesideoftheswitch.
2. Insertthesuppliedsmallscrewsthrougheachbracketandintothebracket
mountingholesintheswitch.
3. TightenthescrewswithaNo.1Phillipsscrewdrivertosecureeachbracket.
4. Alignthemountingholesinthebracketswiththeholesintherack,andinsert
theprovidedpan-headscrews(youcanchooseamongtwotypesof
pan-headscrews)withnylonwashersthrougheachbracketandintotherack.
5. TightenthescrewswithaNo.2Phillipsscrewdrivertosecuremounting
bracketstotherack.
May2020