NETGEAR GS710TUP User Manual
Displayed below is the user manual for GS710TUP by NETGEAR which is a product in the Network Switches category. This manual has pages.
Related Manuals
Installation Guide
Note: Use Category 5e (Cat 5e) Ethernet cables terminated with RJ-45
connectors to make Gigabit connections.
During setup, we recommend that you connect the switch to a network with
Internet access. If the network includes a DHCP server, such as a router, the
switch is automatically assigned a new IP address. (The default switch IP address
is 192.168.0.239.)
2. Check the PoE++ status
PoE++ power is provided by the GS710TUP switch on ports 1-8. The switch can
supply up to 60W PoE++ (IEEE 802.3bt) to each port, with a PoE power budget of
480W across all active PoE++ ports.
The PoE Max LED indicates the status of the PoE budget on the switch:
• Off. Sufcient. More than 7W of PoE power is available.
• Solid yellow. Less than 7W of PoE power is available.
• Blinking yellow. At least once during the previous two minutes, less than
7W of PoE power was available.
10-Port Gigabit Ethernet Ultra60 PoE++
Smart Managed Pro Rackmount Switch
with 1 SFP and 1 Copper Uplink
GS710TUP
Package contents
• NETGEAR GS710TUP Switch
• Detachable power cord (varies by region)
• Rack-mount kit and four rubber footpads
• Installation guide
3. Discover and register the switch
If the switch and your moble device are connected to the same WiFi router
or access point and to the Internet, you can use the NETGEAR Insight app to
discover the switch in your network.
1. On your mobile device, visit the app store, search for NETGEAR Insight, and
download the latest version of the app.
2. Open the NETGEAR Insight app.
3. If you did not set up a NETGEAR account, tap Create NETGEAR Account
and follow the onscreen instructions.
4. Enter the email address and password for your account and tap LOG IN.
5. Tap + in the upper right corner.
6. Either use the the camera on your phone to scan the serial number bar code
located on the bottom of the switch, or enter the serial number.
7. Tap Go.
8. Create or select a Network location you would like to add this device into.
9. Follow the onscreen instructions to manage your device with Insight or
manage it locally.
The switch is registered and added to your NETGEAR account. You can now
congure the switch.
For information about how to congure the switch, see the user manual,
which you can download from https://www.netgear.com/support/.
GS710TUP sample connections
1. Connect the switch
PTZ camera
LED lighting
PoE speaker Encoder
Business router
ReadyNAS
Computer
PoE+ access point
IP camera
PoE++
PoE+
Non-PoE
Internet
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
Change to cloud management mode
By default, the switch is set to Directly Connect to Web Browser Interface, but you
can change this setting to cloud management.
1. While you are logged in to the local browser interface, on the System
Interface page, select the NETGEAR Insight Mobile App and Insight Cloud
Portal radio button.
2. In the pop-up window that opens, click the OK button.
3. Click the Apply button.
4. In another pop-up window that opens, click the OK button.
Your settings are saved and the NETGEAR Business page displays again. The
switch is now ready for cloud management.
Other discovery and conguration methods
The NETGEAR Switch Discovery Tool and the Smart Control Center Utility let you
discover the IP address and congure the switch.
• NETGEAR Switch Discovery Tool. You can use a Mac or a 64-bit Windows-
based computer on the same network as the switch. To download this tool,
visit www.netgear.com/support/product/netgear-switch-discovery-tool.aspx.
• Smart Control Center Utility. You can use a Windows-based computer on
the same network as the switch. To download this utility, visit
www.netgear.com/support/product/SCC.
PoE considerations
PoE, PoE+ and PoE++ power supplied by the switch has a total power budget of
480 watts. Each PoE++ port can provide up to 60W power.
You can override the detected device class and specify the power allocation
for the device connected to each port. The following table shows the standard
power ranges without overrides applied and calculated with the maximum cable
length of 328 feet (100 meters).
Device
class
Standard Class description Maximum
power supplied
from the switch
Power
delivered to
the device
0PoE, PoE+
and PoE++
Default power (full) 15.4W 0.44W–13.0W
1PoE, PoE+
and PoE++
Very low power 4.0W 0.44W–3.84W
2PoE, PoE+
and PoE++
Low power 7.0W 3.84W–6.49W
3PoE, PoE+
and PoE++
Mid power 15.4W 6.49W–13.0W
4 PoE+ and
PoE++
High power 30.0W 13.0W–25.5W
5 PoE++ Ultra high power 45.0W 25.5W-40.0W
6-8 PoE++ Ultra high power 60.0W 40.0W-51.0W
If a device receives insufcient PoE power from the switch, consider using a
shorter cable.
Support
Thank you for purchasing this NETGEAR product. You can visit
https://www.netgear.com/support/ to register your product, get help, access the
latest downloads and user manuals, and join our community. We recommend
that you use only ofcial NETGEAR support resources.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian
French at https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of
Conformity, visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
Do not use this device outdoors. If you connect cables or devices that are
outdoors to this device, see https://kb.netgear.com/000057103 for safety and
warranty information.
Oct 2019