1. Get Started
2. View Your Content
3. Modes, Rules, and Smart Alerts
4. Change Your Settings
5. USB Device Storage
6. Continuous Video Recording
7. Arlo Connect
8. FAQs and Troubleshooting
9. Rechargeable Battery Safety
- Safety rules for Arlo Pro rechargeable batteries
- Safety rules for the Arlo Pro Charging Station

NETGEAR VMC4030P User Manual

Displayed below is the user manual for VMC4030P by NETGEAR which is a product in the Video Surveillance Kits category. This manual has pages.

Related Manuals

NETGEAR ProSafe GS724TR Manual

NETGEAR WN2500RP Manual

February 2019

Arlo Technologies, Inc.

2200 Faraday Ave. Suite 150

Carlsbad, CA 92008 USA 202-11802-07

Arlo Pro 2

HD Security Camera System

User Manual

Support

For product updates and web support, visit http://www.arlo.com/en-us/support/.

Trademarks

service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC. Amazon and all related logos are

trademarks of Amazon.com, Inc. or its afﬁliates. Any other trademarks are for reference purposes.

Compliance

For regulatory compliance information including the EU Declaration of Conformity, visit www.arlo.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

Contents

1. Get Started 6

Meet Arlo Pro 2 ..................................................................................................................................................................................................................................6

Decide how to power your camera ..............................................................................................................................................................6

Install the battery .......................................................................................................................................................................................................................7

Charge your camera battery ...................................................................................................................................................................................7

Connect your base Station to the Internet ..................................................................................................................................8

Get the Arlo app ..............................................................................................................................................................................................................................8

Use the Arlo app for installation and setup .................................................................................................................................9

Place or mount your cameras.................................................................................................................................................................................9

Find a good spot for your camera ............................................................................................................................................................. 10

Optimize your Arlo Pro 2 camera’s ﬁeld of view ...............................................................................................................10

Use camera positioning mode............................................................................................................................................................................11

Test motion detection .....................................................................................................................................................................................................12

Arm your camera to detect motion .........................................................................................................................................................12

Tips for optimal WiFi performance ........................................................................................................................................................... 12

Base station LED guide ................................................................................................................................................................................................. 13

Arlo Pro 2 camera LED guide ............................................................................................................................................................................... 14

Firmware Updates .................................................................................................................................................................................................................. 14

2. View Your Content 15

View the Devices page....................................................................................................................................................................................................15

View camera feeds ................................................................................................................................................................................................................16

Pan and zoom video..............................................................................................................................................................................................................16

Look Back video .......................................................................................................................................................................................................................... 16

Record clips from live video ..................................................................................................................................................................................17

Take a snapshot from live video ....................................................................................................................................................................17

Talk and Listen...............................................................................................................................................................................................................................17

Customize your camera feed image .......................................................................................................................................................17

Cloud recording ........................................................................................................................................................................................................................... 18

View recordings and snapshots .....................................................................................................................................................................19

Share and manage library recordings ................................................................................................................................................20

3. Modes, Rules, and Smart Alerts 22

Modes .............................................................................................................................................................................................................................................................22

Select a mode .................................................................................................................................................................................................................................22

Rules ................................................................................................................................................................................................................................................................23

Change motion sensitivity ........................................................................................................................................................................................ 23

Automatically stop recording when motion stops.......................................................................................................24

Change audio sensitivity ............................................................................................................................................................................................. 24

Add a rule that includes a siren trigger ..........................................................................................................................................25

Manage alerts .................................................................................................................................................................................................................................25

Schedule your camera rules .................................................................................................................................................................................26

Set up geofencing...................................................................................................................................................................................................................27

Geofencing with multiple mobile devices.....................................................................................................................................28

Custom modes ................................................................................................................................................................................................................................29

4. Change Your Settings 31

Turn the Arlo app ﬁngerprint ID login on and o ...........................................................................................................31

Change your password and user name ............................................................................................................................................ 31

Grant access to friends ................................................................................................................................................................................................ 31

Change the time zone .....................................................................................................................................................................................................33

Camera settings .........................................................................................................................................................................................................................34

Change the camera audio settings .........................................................................................................................................................36

Base station settings ........................................................................................................................................................................................................37

View device information ..............................................................................................................................................................................................39

Remove a device from your account ....................................................................................................................................................39

5. USB Device Storage 40

Connect a USB storage device ........................................................................................................................................................................ 40

View the USB storage device status ....................................................................................................................................................40

Safely eject and remove a USB storage device ................................................................................................................ 41

View video clips on a USB storage device ...................................................................................................................................42

Change the USB storage device overwrite setting ..................................................................................................42

Format a USB storage device ............................................................................................................................................................................43

Turn on recording for a USB storage device ..........................................................................................................................43

Stop recording onto a USB storage device ..............................................................................................................................44

6. Continuous Video Recording 45

View the timeline ......................................................................................................................................................................................................................45

Navigate through the timeline ........................................................................................................................................................................45

View the timeline calendar .....................................................................................................................................................................................46

7. Arlo Connect 47

Add Arlo Pro 2 to the Apple Home app ..............................................................................................................................................47

Use Arlo with IFTTT ............................................................................................................................................................................................................... 48

Use Arlo with Alexa and the Arlo Alexa skill ............................................................................................................................48

8. FAQs and Troubleshooting 49

Battery FAQs ....................................................................................................................................................................................................................................49

Manage bandwidth for streaming .............................................................................................................................................................50

Camera glare at night ...................................................................................................................................................................................................... 51

Activity zones and CVR aren’t working .............................................................................................................................................52

Can’t see video streams in a browser ................................................................................................................................................. 52

Not receiving push notiﬁcations ..................................................................................................................................................................53

Verify that the Arlo base station is online..................................................................................................................................55

Base station Is oine .......................................................................................................................................................................................................55

Signal strength ............................................................................................................................................................................................................................. 57

Reset the Arlo base station to factory settings .............................................................................................................58

9. Rechargeable Battery Safety 59

Safety rules for Arlo Pro rechargeable batteries.........................................................................................................59

Safety rules for the Arlo Pro Charging Station ................................................................................................................. 60

1. Get Started

Meet Arlo Pro 2

You can use your camera wire-free, powered by the battery, or while it’s plugged

into an AC power outlet. Plugging in the camera unlocks more features. When your

Arlo Pro 2 camera detects motion, it uses a WiFi link to the Arlo Pro base station to

stream video to your Arlo account in the cloud.

Decide how to power your camera

Your camera comes with accessories that you can use to create a custom security

system that meets your individual needs:

• Before you use your camera wirelessly, we recommend that you charge the

battery.

• For AC power indoor use, connect the AC power adapter to an indoor electrical

outlet.

• If you want to install your camera outdoors, use the Arlo Pro 2 outdoor power

adapter (sold separately).

Get Started

Install the battery

1. Unlock the battery compartment by pressing and holding the latch.

2. Gently pull back the battery door to open the compartment.

3. Align the battery contacts.

4. Insert the battery.

5. Close the battery door.

For more information, see Safety rules for Arlo Pro rechargeable batteries on page

59.

Charge your camera battery

1. If the camera is outside, bring it inside to charge the battery.

2. Connect the camera cable to the power adapter.

3. Connect the camera cable to the camera.

4. Plug the power adapter into an indoor electrical outlet.

When the battery is fully charged, the camera LED lights solid blue.

Note: You can buy spare Arlo Pro 2 rechargeable batteries and charge them in the Arlo

Charging Station (sold separately).

Get Started

Connect your base Station to the Internet

The base station connects to your home network and allows you to view your

camera streams from anywhere.

1. Connect the base station to your router using an Ethernet cable.

2. Connect the AC adapter to the base station and plug it in.

3. Turn the base station on by pressing the On/O button.

If your base station has one LED on the front, the LED lights green in about two

minutes.

If your base station has three LEDs on the front, the Power LED and Internet

LED light green in about two minutes.

Get the Arlo app

Download the free Arlo app to install your base station and camera. This app

provides step-by-step instructions.

Get Started

Use the Arlo app for installation and setup

You must use the Arlo app to install and set up your Arlo base

station and Arlo Pro 2 camera. The Arlo app guides you through

setup in this order:

1. Create your Arlo account.

You use the same account to manage all your Arlo devices.

2. Connect the Arlo base station to the Internet and add it to

your account.

3. Add each Arlo Pro 2 camera and sync it with the Arlo bae station.

Once you set up your Arlo account, you can access it by using the Arlo app on a

smartphone or tablet, or from a computer using a web browser. If you’re using a

computer, enter https://my.arlo.com/#/login in the address bar of the browser.

After installation, you can use the Arlo app to view your camera feed, customize

alerts and notiﬁcations, create schedules for your cameras, and more.

Place or mount your cameras

You can place your camera on a ﬂat surface

or you can mount it on a wall. Choose a

location with a clear, unblocked ﬁeld of

view and with a good signal to your base

station.

Note: WiFi range can be aected by building

materials or objects that block WiFi signals and

by interference from other WiFi networks.

¾To use the wall mount:

1. Fasten the mounting screw into the wall.

If you’re mounting the camera on drywall,

use the mounting screws and anchors we

provide.

2. Hang the mount from the screw.

3. Place your camera on the mount.

The magnets in the camera keep it in

place.

Get Started

Find a good spot for your camera

When positioning your Arlo Pro 2 camera, keep these tips in mind:

• Place your camera so that the area you want to monitor is within the camera’s

ﬁeld of view.

• Mount your camera at least 7 feet (2 meters) above the ﬂoor or the ground and

aim it slightly downward for the best sensor performance.

• Place your camera so that side-to-side trac crosses its ﬁeld of view. Arlo’s

motion sensor is most sensitive to side-to-side motion that’s 5 to 20 feet (1.5 to

6 meters) from the camera.

Optimize your Arlo Pro 2 camera’s ﬁeld of view

The ﬁeld of view is the area in which the camera can detect motion. Your Arlo Pro 2

camera has a 130-degree viewing angle. In the following images, the green areas

show your Arlo Pro 2’s ﬁeld of view, both horizontally and vertically.

Get Started

When positioning your Arlo Pro 2 camera, keep the following tips in mind:

• Keep active locations in the camera’s ﬁeld of view. Position your camera so

that the space that you want to monitor is within the camera’s ﬁeld of view.

• Don’t block the camera’s ﬁeld of view. Make sure that no walls, tables, or

other objects are too close to your camera. If an object is within 2.5 inches (6.4

centimeters) of the sides or front of your camera, that object can reﬂect

infrared (IR) light back into the camera lens and cause glare or hazy video,

especially at night. The following images show positioning errors that can cause

glare and foggy night vision:

Use camera positioning mode

Position mode is available only when the camera isn’t streaming, recording motion,

or in Motion Detection mode.

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Select the camera.

4. Tap Device Utilities > Camera Positioning.

The camera starts streaming video.

Note: In camera positioning mode, the camera streams video as fast as possible, without

buering, so that you can aim the camera while watching on a smartphone and make near

real-time adjustments. This means that you might see lower-quality video while you’re

positioning the camera.

Get Started

Test motion detection

You can use the motion detection test to ﬁnd the right motion sensitivity setting

for each camera.

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Select the camera.

4. Tap Device Utilities > Motion Detection Test.

5. Move in front of the camera.

During this test, the camera LED blinks amber when motion is detected.

6. Move the slider to adjust the motion sensitivity level as needed.

Arm your camera to detect motion

You control when your camera detects motion and the rules it uses to record

and alert you by selecting a mode. The Arlo app comes with four modes: Armed,

Disarmed, Schedule, and Geofending. You can customize each mode and you can

also create custom modes. For information about how to do this, see 3. Modes,

Rules, and Smart Alerts on page 22.

You can identify motion activity zones in the camera view where you want the

camera to detect motion. You can also select which activity zone or zones detect

motion. See Motion detection activity zones on page 34.

Tips for optimal WiFi performance

Place your Arlo Pro 2 camera in a location with a good WiFi signal to the base

station. The distance between WiFi devices can aect the WiFi signal:

• Maximum recommended distance. Place your camera a maximum of 300 feet

(90 meters) from the base station. The maximum line-of-sight range of 300 feet

is reduced by each wall, ceiling, or other major obstruction between the camera

and base station.

• Minimum recommended distance. To reduce WiFi interference, place your

Arlo Pro 2 cameras 10 feet (3 meters) away from the base station and allow at

least 6½ feet (2 meters) between cameras. Place the base station at least 6

feet (1.8 meters) away from your WiFi router.

Get Started

These materials can reduce WiFi signal strength if they are located between WiFi

devices such as your base station and cameras:

• Unusually thick walls and ceilings

• Brick

• Concrete

• Stone

• Ceramic

• Glass, especially mirrors

• Metal

• Large quantities of water, such as the water in a ﬁsh tank or water heater

Base station LED guide

Your base station might have one LED or three LEDs on the front panel.

Base station model with one LED

Solid blue

The base station is

connected to the Internet

and to an Arlo camera.

Slow blinking blue

The base station is ready

to sync or pair with an Arlo

camera.

Fast blinking blue

The base station is synching

with a camera.

Solid amber

The base station is booting.

Slow blinking amber

The base station didn’t

ﬁnd the camera. The

camera is out of range or a

connection error occurred.

Alternating blue and

amber

A ﬁrmware update or reset is

in process.

Base station model with three LEDs

Power LED Internet LED Camera LED

Solid green

The base station is powered

on.

Solid green

The base station is

connected to the Internet.

Solid green

A camera is connected to the

base station.

Blinking green

A ﬁrmware update is in

progress. DO NOT TURN

OFF THE BASE STATION OR

CAMERAS.

Blinking green

The base station is

transmitting data.

Blinking green

The base station is

attempting to sync with a

camera.

Solid amber

The base station is booting.

Solid amber

The base station is

connected to the router

but it isn’t connected to the

Internet.

Blinking amber

A camera is too far from

the base station. The signal

strength is weak.

Get Started

Arlo Pro 2 camera LED guide

The LED on the camera lights when the camera is powered on. The LED changes

color and blinks depending on the battery charge and to indicate the status of

activities such as syncing the camera and updating the camera ﬁrmware.

Solid blue The camera is connected to the Quick Charge 5V power adapter

and is fully charged.

Fast blinking blue for 3

seconds

The camera is connected to the Quick Charge 5V power adapter

and is charging.

Fast blinking blue for 10

seconds

The camera synced to the base station.

Solid amber The camera is booting.

Blinking amber once per

minute

The battery charge is low (15% or less).

Fast blinking amber for 10

seconds

The camera failed to sync to the base station.

Blinking blue and amber A ﬁrmware update is in progress. DO NOT TURN OFF THE CAMERA.

Firmware Updates

During initial setup, when you add the base station to your Arlo account, the

Arlo Pro 2 system checks for ﬁrmware updates. After you sync the ﬁrst camera,

if ﬁrmware updates are available, a prompt displays for ﬁrmware updates on the

Devices page. Live stream isn’t available until the device is updated.

After a base station ﬁrmware update, the base station reboots and connects to

the Internet.

When a camera ﬁrmware update is in progress, the LED on the camera blinks

alternating blue and amber. After this, the LED is o for one to two minutes while

the camera installs the ﬁrmware.

WARNING: Do not open the camera’s battery door while the camera is updating

and installing ﬁrmware.

After the camera ﬁrmware update completes, the camera syncs to the base

station and the camera LED blinks blue rapidly for 10 seconds.

2. View Your Content

Videos recorded by your camera are stored in a library. You can view your recordings

and snapshots, mark them as favorites, and search using the ﬁlter. When you open the

Arlo app, the Devices page displays your camera feeds.

View the Devices page

Camera

icon

Located below each camera

feed

Camera

feed icon

Tap the camera feed to display these

icons

Battery charge Play/Stop

WiFi signal from the base station Mute the audio

Audio detection is on Talk and Listen

Motion detection is on Record video manually

Open a menu and view or change the

camera settings

Take a snapshot

View or change the camera settings USB device storage

Camera feed.

This camera is

disarmed.

The sound and motion

detection icons are

gray. Tap a button to go to

Devices, Library, Modes, or

Settings.

This camera is armed

to detect sound and

motion.

Number of new recordings.

Tap to view the camera

settings.

View Your Content

View camera feeds

You can view your camera feeds at any time.

1. Open the Arlo app.

2. Tap the camera feed.

The camera feed updates and camera feed icons display.

3. To stop viewing and listening to the live feed, tap Stop .

Pan and zoom video

You can pan and zoom to focus in on the high-def details of any live or recorded

video. Just pinch and drag any image as you do with photos on your smartphone.

1. Open the Arlo app.

2. Tap Library.

3. Tap any live video or prerecorded video from your Arlo library.

4. To pan and zoom using a mobile device:

• To zoom in and out of the video, use the pinch gesture.

• To move around the zoomed-in frame, touch and drag.

Note: To pan and zoom using a computer, do the following:

• To zoom in and out, click the Zoom icon.

• To move around in the frame, use your mouse button.

Look Back video

When plugged in, your Arlo Ultra camera records continuously, but discards the

video after three seconds if no motion is detected. This means that your motion-

triggered video recordings start before any motion happens; you don’t miss a thing.

¾To set up your camera to record Look Back video:

1. Plug in your Arlo Pro 2 camera.

2. Make sure that the camera is using a motion-detection mode such as Armed.

3. Subscribe to a CVR plan.

View Your Content

Record clips from live video

1. Open the Arlo app.

2. Tap the camera feed image.

3. Tap Record to begin recording.

This icon turns red to indicate that you’re recording the live feed.

4. To stop recording, tap Record again.

Take a snapshot from live video

1. Open the Arlo app.

2. Tap the camera feed image.

3. Tap Snapshot .

The snapshot is saved in your library.

Talk and Listen

1. Open the Arlo app.

2. Tap the camera feed image.

3. Tap Talk and Listen .

4. The ﬁrst time you use Talk and Listen, allow Arlo to use your phone’s

microphone.

A microphone button displays.

5. Tap and hold the microphone button and speak.

Customize your camera feed image

If you use more than one camera, you can change the order in which the camera

feeds display on the Devices page. You can also zoom, invert, or rotate the camera

feed image.

Change the camera order

1. Open the Arlo app.

View Your Content

2. Tap Settings.

3. Under SYSTEM, tap Device Order.

4. If you’re using a smartphone or tablet, tap Edit at the top of the page.

A list icon displays.

5. Tap and hold the list icon and drag each device to the correct position in the

list.

6. Tap Save.

Zoom a camera image

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Select the camera.

4. Tap Video Settings.

5. Use your ﬁngers to zoom in.

Rotate a camera feed 180 degrees

You can rotate the video feed to invert it.

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Select the camera.

4. Tap Video Settings.

5. Tap Rotate Image.

The camera feed image is inverted.

Cloud recording

Your cameras record when they detect motion or sound. These videos are sent to

the cloud for secure storage in your library. Cloud recording is included in both free

and paid plans.

Note: Recordings are encrypted with your user name and password; no one else can

access your recordings.

View Your Content

You can access your recordings from your mobile device or from a Windows-based

or Mac computer. You can download recordings from the cloud and save them to

your mobile device or computer.

View recordings and snapshots

Your Arlo Pro 2 camera stores recordings and snapshots in the library. You can use

the ﬁlter and the calender to ﬁnd and view speciﬁc recordings.

Use the library

You can use the library to ﬁnd and view recordings based on the date.

1. Open the Arlo app.

2. Tap Library.

3. Use the arrows on either side of the month to select a month to view.

A green circle indicates the selected day. A green dot indicates each day on

which a video clip was recorded.

4. Tap a highlighted date.

Recordings from that date display below the calendar.

Use the ﬁlter

You can use the ﬁlter to ﬁnd and view recordings based on criteria that you select.

1. Open the Arlo app.

2. Tap Library.

3. Tap Filter in the upper-left corner of the page.

4. Tap the ﬁltering criteria that you want to use.

5. Tap Done.

Turn o the ﬁlter

1. Open the Arlo app.

2. Tap Library.

3. Tap Filter in the upper-left corner of the page.

View Your Content

4. Tap Reset.

5. Tap Done.

Share and manage library recordings

Download recordings

1. Open the Arlo app.

2. Tap Library.

3. Tap a recording.

4. Tap Download.

5. Tap OK to conﬁrm.

Make a recording a favorite

1. Open the Arlo app.

2. Tap Library.

3. Tap a recording.

4. Tap Favorite.

Share recordings

1. Open the Arlo app.

2. Tap Library.

3. Tap a recording.

4. Tap Share.

5. Share the ﬁle.

Donate recordings for research

You can donate video or snapshot ﬁles to Arlo for research and development of

Arlo products.

1. Open the Arlo app.

2. Tap Library.

View Your Content

3. Tap a recording.

4. Tap Donate.

5. Tap OK to conﬁrm.

Delete recordings

1. Open the Arlo app.

2. Tap Library.

3. Tap a recording.

4. Tap Delete.

5. Tap OK to conﬁrm.

3. Modes, Rules, and Smart Alerts

Modes and rules let you tell your Arlo system what to do in dierent situations. For

example, you can set your Arlo system to record a 30-second video when the motion

sensor is activated on a speciﬁc camera and alert you by email.

Modes

Modes let you tell your Arlo cameras to respond dierently at dierent times. For

example, you probably don’t want to receive an alert about motion in the living

room while you’re doing yoga there. You might want to turn on a dierent mode

when you’re away on vacation than when you’re out at the store for an hour. Arlo

modes give you control over how your cameras respond to motion or sound.

You can create your own modes, but Arlo Pro 2 comes with the following modes:

Armed. Detection is on for this camera.

Disarmed. Detection is o for this camera.

Schedule. Manage detection based on a schedule.

Geofencing. You can use geofencing to arm, disarm, or resume a schedule

mode when you arrive at or leave a location based on your mobile device.

You can customize the Armed and Schedule modes and you can add new modes.

You might want to create a mode in which some motion sensors and cameras are

active but others aren’t. For example, when you’re sleeping, you might want your

exterior cameras to be active, but your interior cameras to be inactive.

Note: You can create dierent modes for the same camera, but the camera can use only

one mode at a time.

Select a mode

You can select a mode or set modes to activate according to a schedule.

1. Open the Arlo app.

2. Tap Mode.

3. Tap an Arlo device.

The Mode page displays.

Modes, Rules, and Smart Alerts

4. Tap a mode to activate it.

The mode that you selected turns on immediately and stays active until you

change it.

When you view the Devices page, the icons that display at the top of the camera

feed are based on the currently selected mode:

Motion. Motion detection is on.

Sound. Audio detection is on.

Rules

Each mode uses one or more rules to control your Arlo system. You can add one

rule to a mode for each Arlo Pro 2 camera that is connected to the same base

station. This lets you set up dierent triggers and actions for each camera. For

example, you might want to be notiﬁed when motion is detected at the front door,

but not when it is detected in the backyard while your dog is in the backyard.

You can set these options for each rule:

• Trigger device. The trigger device is the camera that detects motion or sound.

You can adjust the motion and sound sensitivity to minimize false alarms.

• Action device. The action device responds to motion or sound detection on

the trigger device. For example, you might want your backyard camera or your

driveway camera to trigger your door camera to start recording video. You

decide what action each Arlo Pro 2 Camera takes when motion or sound is

detected.

• Notiﬁcations. When a trigger is detected, Arlo can send you push notiﬁcations,

email alerts, or both. You can also send email alerts to friends, family members,

pet sitters, or anyone who might need to respond when a camera is triggered.

Change motion sensitivity

You can edit a rule to change the motion sensitivity level for Arlo Ultra cameras.

1. Open the Arlo app.

2. Tap Mode.

3. Tap the SmartHub.

4. Tap Edit next to the mode.

5. Tap Edit next to the rule.

Modes, Rules, and Smart Alerts

6. Under If the following, tap Edit next to Motion is detected.

7. Move the slider to adjust the sensitivity level for motion detection for this

camera.

If you’re using the Arlo app on a mobile device, your settings are automatically

saved.

8. If you’re using a browser on a computer, click Save.

Note: You can add motion activity zones within the camera view where you want the

camera to detect motion. You can also select which activity zone or zones detect motion.

See Motion detection activity zones on page 34.

Automatically stop recording when motion stops

1. Open the Arlo app.

2. Tap Mode.

3. Tap the SmartHub.

4. Tap Edit next to the mode.

5. Under Then do the following, tap Edit next to Record video.

6. Select Record until activity stops (up to 300 sec).

Change audio sensitivity

1. Open the Arlo app.

2. Tap Mode.

3. Tap the base station.

4. Tap Edit next to the mode.

5. Under If the following, tap Edit next to Audio is detected.

6. Move the slider to the desired level of audio detection.

If you’re using the Arlo app on a mobile device, your settings are automatically

saved.

7. If you’re using a browser on a computer, click Save.

Modes, Rules, and Smart Alerts

Add a rule that includes a siren trigger

Only cameras connected to an Arlo Pro base station can trigger the siren.

1. Open the Arlo app.

2. Tap Mode.

3. Tap the base station.

4. Tap next to the mode.

5. Under Rules, select the camera.

6. Select the Turn Siren ON check box.

7. Tap next to Sound Alarm.

8. Set the sliders for Siren Duration and Siren Loudness.

9. Tap Edit Rule or click Back.

10. Tap Done or click Save.

Note: This rule isn’t active until you activate the mode to which you added the siren

trigger.

Manage alerts

Arlo can push notiﬁcations to your smartphone, send you email alerts, or do both. To

receive Arlo notiﬁcations on your phone, you must install the Arlo app on your phone.

Note: If you log out of the Arlo app on your smartphone or mobile device, you will stop

receiving push notiﬁcations.

1. Open the Arlo app.

2. Tap Mode.

3. Tap the base station.

4. Tap Edit next to the mode.

Note: The Disarmed mode doesn’t send alerts.

5. Under Alert, tap Push Notiﬁcation to turn alerts on and o for your mobile

device.

Modes, Rules, and Smart Alerts

6. Under Alert, tap Email Alerts to turn email notiﬁcations on and o.

7. To specify an email address, tap Edit next to Email Alerts and enter the

email address.

Schedule your camera rules

You can set a schedule to arm and disarm cameras automatically. Schedules recur

weekly. For example, the schedule for Tuesday is repeated every Tuesday as long

as the schedule is turned on. Arlo is preconﬁgured with this schedule:

• Monday through Friday, 8:00 a.m. to 5:00 p.m. All motion sensors are on.

• All other times. All motion sensors are o.

Add a schedule

1. Open the Arlo app.

2. Tap Mode.

3. Tap the base station.

4. Tap Schedule .

5. Tap Edit next to Schedule.

6. Tap + Add.

7. Set the days and times and then tap Save.

Edit a schedule

1. Open the Arlo app.

2. Tap Mode.

3. Tap the base station.

4. Tap Schedule .

5. Tap Edit next to Schedule.

6. Tap a green box.

7. Change the start and stop times and tap Save.

Modes, Rules, and Smart Alerts

Set up geofencing

Geofencing is a virtual fence around a location called a zone. You can use Arlo

geofencing to arm, disarm, or resume schedule modes when your mobile device is

in zone or out of zone. To set up geofencing, you must use your mobile device and

allow the Arlo app to use your location.

Geofencing accuracy

For accuracy, geofencing uses a combination of GPS, cellular data, and WiFi data.

The local environment can aect geofencing:

• In urban environments, where cell towers and WiFi routers are more dense,

geofencing accuracy can reach 100–200 meters.

Note: If you live in a skyscraper, geofencing might not work reliably due to GPS

inaccuracies. Using the Large radius setting might help.

• In rural areas, where cell towers and WiFi routers are sparse, geofencing

accuracy can reach several hundred meters.

Prepare your mobile device for geofencing

1. Enable GPS or location services so that Arlo can locate your device.

2. Enable WiFi.

Set up geofencing for the ﬁrst time and set up modes

1. Open the Arlo app.

2. Tap Mode.

3. Tap the SmartHub.

4. Tap Geofencing.

5. Allow Arlo to use your mobile device’s location.

Geofencing works only if Arlo can locate your mobile device. The Location

Address page displays your current address.

6. To change the radius setting, tap Radius and select a radius size.

Radius size sizes are Small, Medium, and Large (approximately 150 meters, 250

meters, and 500 meters, respectively).

7. Tap Device Location and enter a name for your location.

Modes, Rules, and Smart Alerts

8. Tap Away Mode and select a mode.

Your camera uses the Away mode when your mobile device is outside the radius

of your camera’s location. Most people select Armed, Schedule, or Custom Mode

so that the camera detects motion while they’re gone.

9. Tap Home Mode and select a mode.

Your camera uses this mode when your mobile device is within the radius of

your camera’s location. Most people select Disarmed while they’re home.

If you use more than one enabled mobile device, you might be asked to select an

Arlo device to connect it to.

10. Tap the preferred mobile to select it.

Geofencing with multiple mobile devices

Arlo geofencing works with multiple mobile device.

Arlo uses the ﬁrst in, last out principal to manage households where more than one

person uses geofencing. When no one is home, your Arlo Ultra cameras are armed

because no one is inside the geofence. When at least one person is home (ﬁrst

in), the cameras are disarmed. If one person leaves, but another stays home, the

cameras are still disarmed until the last person leaves (last out).

Make sure that these conditions are met:

• Your Arlo devices are online.

• Geofencing is enabled.

• Your friends’ and family’s mobile devices are added to your account.

For information about adding devices, see Enable or disable geofencing for

friends’ mobile devices on page 28.

• A friend who wants to participate in geofencing must be logged in to the Arlo

app on his or her mobile device and the GPS or location service must be enabled

on your friend’s mobile device.

Enable or disable geofencing for friends’ mobile devices

1. Open the Arlo app.

2. Tap Mode.

3. Tap the SmartHub.

Modes, Rules, and Smart Alerts

4. Tap Edit next to Geofencing.

5. Tap Enabled Devices.

A list of mobile devices displays. A check mark appears next to the device name

when geofencing is enabled.

6. Tap one or more mobile devices.

The device location displays as either In Zone or Out of Zone.

7. To disable geofencing, tap the mobile device again.

The check mark disappears when geofencing disabled.

Custom modes

You can add modes in addition to the modes that come with Arlo and give the new

modes custom names, such as Vacation.You can create one rule for each mode.

You can create multiple rules within the same mode so that each camera performs

dierent actions and sends dierent alerts. You can also use Schedule mode to

activate modes automatically at dierent times of the day or week. See Schedule

your camera rules on page 26.

Add a mode

1. Open the Arlo app.

2. Tap Mode.

3. Tap the SmartHub.

4. Tap Add a Mode.

5. Enter the mode name.

The Trigger Device page displays.

6. Select the Arlo Pro 2 camera that detects motion and/or sound.

The Trigger page displays.

7. Select how you want your Arlo Pro 2 camera to be triggered, when motion is

detected, when audio is detected, or both.

Modes, Rules, and Smart Alerts

8. If you selected motion as a trigger, set the motion sensitivity using the slider.

Higher motion sensitivity settings usually trigger your camera to capture videos

more frequently.

9. If you selected audio as a trigger, set the audio detection sensitivity using the

slider.

The Devices page displays with the trigger device selected. (You can change the

trigger device.)

10. On the Action page, select Record video or Do Nothing.

11. On the Recording Settings page, specify how long your Arlo Pro 2 camera

records.

12. Select the notiﬁcations that you want to receive.

If you selected Email Alerts, enter the email addresses where you want to

receive alerts.

13. Review the summary of your settings and tap Save.

Your new mode is saved.

4. Change Your Settings

You can customize the Arlo Pro 2 settings.

Turn the Arlo app ﬁngerprint ID login on and o

The Arlo app supports Touch ID ﬁngerprint identity sensors. If you’re using a mobile

device with this feature, you can turn the Arlo app Touch ID login on and o.

¾To turn the Arlo app Touch ID login on and o:

1. Open the Arlo app.

2. Tap Settings > Proﬁle.

3. Tap Log in with Touch ID.

Tapping this button turns Log in with Touch ID on and o.

Change your password and user name

Once you set up your Arlo account, you can access it by using the Arlo app on a

smartphone or tablet, or from a computer using a web browser. If you’re using a

computer, enter https://my.arlo.com/#/login in the address bar of the browser.

1. Open the Arlo app.

2. Tap Settings > Proﬁle.

3. Enter the new user name and password.

On an iOs device, tap Edit at the top of the page.

On an Android device, tap the tab for each ﬁeld.

4. Tap Save.

Grant access to friends

You can add friends to your Arlo account. Friends can view live streams from your

cameras; record video clips; view, share, mark as favorite, and delete clips from

your library; and take snapshots. Friends are granted limited access to some of the

settings and features of your Arlo account. You can select which cameras friends

can see and what administrative rights are available to them.

Change Your Settings

Friends without access rights can:

• Play and view library content.

• View live footage.

• Zoom and drag video footage.

• Control brightness.

• Enter full-screen view.

Friends who are granted access rights can also:

• Play and pause video footage.

• Record video footage.

• Mute the speaker.

• Access and change modes.

• View motion detection statuses.

• Manually record.

• Take snapshots.

• Mark as a favorite, share, download, and delete video footage.

• Use a camera’s microphone.

Add a friend

1. Open the Arlo app.

2. Tap Settings.

3. Under ACCOUNT, tap Grant Access.

4. Tap Add or +.

5. Enter your friend’s ﬁrst name, last name, and email address.

6. Tap the Arlo devices that you want your friend to access.

7. To grant access rights to your friend, tap Allow Access Rights.

Selecting Allow Access Rights allows this friend to change your account and

camera settings.

8. Tap Send Invite.

An email message is sent inviting your friend to create an Arlo account. This

friend’s name is displayed with the status Pending. When the friend accepts

your invitation, the status changes to Accepted.

Change Your Settings

Edit a friend’s access privileges

1. Open the Arlo app.

2. Tap Settings.

3. Under ACCOUNT, tap Grant Access.

A list of your friends displays with the status of their accounts.

4. Tap the friend, and tap Edit .

5. Tap cameras to select or deselect them.

6. Tap Allow Access Rights.

Selecting Allow Access Rights allows this friend to change your account and

camera settings.

7. Tap Done.

Delete a friend

1. Open the Arlo app.

2. Tap Settings.

3. Under ACCOUNT, tap Grant Access.

4. Select the friend, and tap Edit .

5. Tap Delete Friend.

6. Tap Yes.

Change the time zone

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the SmartHub.

4. Tap Time Zone.

5. Tap a time zone.

If you’re using a mobile device, your settings are automatically saved.

6. If you’re using a computer, click Save.

Change Your Settings

Camera settings

You can view or change the settings for each camera. You can do this by tapping

Settings > My Devices and selecting the camera, or by tapping the Menu icon

or the Device Settings icon below the camera feed.

Add motion detection activity zones

You can add motion activity zones within the camera view where you want the

camera to detect motion. You can also select which activity zone or zones detect

motion.

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Select the camera.

4. Tap Video Settings.

5. At the bottom of the page, tap Create New Zone.

An activity zone box displays in the camera feed image.

6. Move the box to the desired activity zone.

You can resize the box using the corner arrows.

7. Tap Save.

Change the camera name

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the camera.

4. Tap Edit next to the camera name.

5. Enter a new name that reminds you of the camera’s location, such as Garage or

Front Door.

Camera names are limited to 32 characters.

6. Tap Save.

Change Your Settings

Turn O the Camera LED

The LED on the Arlo Pro 2 camera lights in dierent colors.

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the camera.

4. Tap Camera LED.

5. Tap Battery Fully Charged Indicator to toggle the LED o and on.

If you’re using a mobile device, your settings are automatically saved.

6. If you’re using a computer, click Save.

Change the video quality and battery usage

You can set the video resolution as Best Video, Optimized, and Best Battery Life.

Using the Best Battery Life setting reduces the WiFi bandwidth required.

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the camera.

4. Tap Video Settings > Power Management.

5. Tap to select Best Battery Life, Optimized, or Best Video.

6. Tap Conﬁrm.

Turn night vision on and o

When night vision is enabled, the camera automatically turns on infrared (IR) LEDs

to record in low-light conditions. We recommend that you turn o night vision if

the Arlo Pro 2 camera is facing reﬂective surfaces, such as windows.

1. Open the Arlo app.

Change Your Settings

2. Tap Settings > My Devices.

3. Tap the camera.

4. Tap Video Settings > Low Light Settings.

5. Tap Night Vision.

Change the camera audio settings

Turn the Microphone O and On

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the camera.

4. If you’re using the Arlo app on a mobile device, tap Audio Settings.

The Audio Settings page displays.

5. Tap Microphone.

Change the speaker settings

You can turn the speaker o and on and you can control the volume on your

camera.

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the camera.

4. If you’re using the Arlo app on a mobile device, tap Audio Settings.

The Audio Settings page displays.

5. To turn the speaker o and on, tap Speaker.

6. To change the speaker volume, move the Speaker Volume slider.

Your settings are saved.

Change Your Settings

Base station settings

You can view or change base station settings.

Change the base station name

When you set up your Arlo system, you entered a name for the base station. You

can change this name.

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the base station.

4. Tap Name.

5. Enter a new name for the base station.

The new name is displayed in the Arlo app.

Adjust the base station ﬂicker setting

The combination of certain artiﬁcial light sources and the camera shutter speed

might result in ﬂickering in recorded video. The default setting for the base station

is Auto, but you can change the ﬂicker adjustment.

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the base station.

4. Tap Flicker Adjustment.

5. Tap a setting.

6. Tap Save.

View base station device information

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the base station.

4. Tap Device Information.

Change Your Settings

The ﬁrmware level, hardware level, and serial number for the base station

display.

Restart the base station

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the base station.

4. Tap Restart.

The base station restarts.

Select the siren volume

The base station includes a siren. You can manually activate or turn o the siren.

You can also set up motion detection rules to trigger the siren and select the siren

volume level when you set up the rule.

WARNING: The loudest siren setting, which is the default loudness option for the

siren, is more than 100 decibels. Do not test the siren while people or pets are

close to the base station. Prolonged exposure to the siren might cause hearing

damage.

The base station siren settings are Loud, Very Loud, and Extremely Loud.

Turn the siren on and o using the Arlo app

WARNING: The loudest siren setting, which is the default loudness option for the

siren, is more than 100 decibels. Do not test the siren while people or pets are

close to the base station. Prolonged exposure to the siren might cause hearing

damage.

1. Open the Arlo app.

2. Tap Turn Siren ON.

3. Tap Yes to conﬁrm that you want to turn on the siren.

Note: The siren loudness is determined by the loudness of the siren trigger rule for

whichever mode is currently active on the base station. If the active mode doesn’t use any

siren trigger rules, the siren defaults to its loudest setting.

Change Your Settings

4. To turn o the siren, tap Turn Siren OFF.

The siren stops.

Turn o the siren with the base station button

If your base station model has a button on the top, you can use it to turn the siren

o and on.

View device information

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the device.

4. Scroll down to the Version heading and view the ﬁrmware version, hardware

version, and the serial number.

Remove a device from your account

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the device.

4. Scroll down and tap Remove Device.

The device is removed from your account and its settings are deleted.

5. USB Device Storage

All recordings are stored in the cloud, but you can connect a USB storage device

to the base station and use the USB storage device as a backup location to

store recordings. Simply connect a USB storage device and the base station

automatically enables all the settings for you. The USB storage device can’t be

used on its own as a substitute for cloud recording.

If you connect a USB storage device, the camera records to both the cloud and the

USB storage device for motion-triggered and audio-triggered recordings (not CVR).

If the camera and base station are powered on, but the Internet connection is lost,

the camera continues to record to the USB storage device.

The Arlo app notiﬁes you if the USB storage device is full. The camera can reformat

the USB storage device for you. See Format a USB storage device on page 43.

Connect a USB storage device

Plug a USB storage device into a USB port on the base station.

Note: Before disconnecting the USB storage device, you must safely eject it. See

Safely eject and remove a USB storage device on page 41.

View the USB storage device status

The Arlo app notiﬁes you if the USB storage device is getting full or if the format of

the USB storage device isn’t compatible. You can also use the Arlo app to view the

USB storage device status.

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the base station.

USB Device Storage

4. Tap Local Storage.

The USB Device status shows whether the USB storage device is ready, must be

formatted, or is full.

Safely eject and remove a USB storage device

USB storage devices must be safely ejected so that recordings don’t occur

as you’re removing them. Removing a USB storage device while it is in use can

permanently disable it. The ﬁles on the USB storage device might be corrupted.

If you remove the only USB storage device that is connected to your base station,

USB recording is disabled until you connect another USB storage device. If another

USB storage device is still connected to your base station and USB recording is

turned on, recording is automatically enabled on that USB storage device.

¾To safely eject and remove a USB storage device:

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the base station.

4. Tap Local Storage.

The Local Storage page displays. Connected USB storage devices are numbered

to match the USB ports on the base station. If you’re not sure which device to

remove, check the number on the base station USB port into which the USB

storage device is inserted.

5. Tap the USB storage device that you want to remove.

6. Tap Safely Eject USB Device.

7. Wait for the Unmounting USB storage device progress message to close, and

then remove the USB storage device from your base station.

The settings on the page gray out to show that the USB storage device is

ejected. The camera stops recording onto the USB storage device. The USB

storage device can now be safely removed.

USB Device Storage

View video clips on a USB storage device

Video clips on USB storage devices don’t display in the Arlo app, but you can use a

Windows-based or Mac computer to view the clips.

1. Safely eject the USB storage device.

For more information, see Safely eject and remove a USB storage device on

page 41.

2. Connect the USB storage device that you ejected to a Windows-based

computer or a Mac computer.

3. Wait for the USB storage device to appear in the list of available drives on your

computer, and then open the drive folder to view the ﬁles on your USB storage

device.

4. Open the arlo folder.

Recorded videos are saved in this folder in MP4 format. Video ﬁles are named

according to this convention: camera serial number_video number_date_video

clip tag. Dates are in the format YYYYMMDD.

Note: If you’re unable to play MP4 ﬁles on your computer, update your media

player software to the latest version and try again. You can also download a

free universal multimedia player, such as VLC.

Change the USB storage device overwrite setting

By default, when the available USB storage is less than 20 percent, the oldest

recording is erased to make room for new recordings. You can change this setting.

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the base station.

4. Tap Local Storage.

5. Tap Automatic Overwrite.

USB Device Storage

Format a USB storage device

The Arlo app displays a pop-up message to let you know if it is necessary to format

the USB storage device. The base station can format the USB storage device.

Warning: Do not use the base station to format storage devices with more than 2

TB of storage capacity. The base station formats storage devices using the FAT32

ﬁle system, which supports a maximum of 2 TB of storage space. The formatting

process reduces the capacity of larger storage devices to a maximum of 2 TB.

1. If you want to save ﬁles on the USB storage device, save or copy the ﬁles in

another location before you format the USB storage device.

Formatting a USB storage device deletes ﬁles on the device.

2. Connect the USB storage device to a USB port on the base station.

For more information, see Connect a USB storage device on page 40.

3. Open the Arlo app.

4. Tap Settings > My Devices.

5. Tap the base station.

6. Tap Local Storage.

If you see the message Requires Formatting, the USB storage device isn’t in the

correct format (FAT32) and you must format it before you can use it for local

storage.

7. Tap > next to the USB storage device that you want to format.

8. Tap Format USB Device.

9. Wait for USB Device Status to change from Formatting to Ready.

Warning: Do not remove the USB storage device while it is formatting. The USB

storage device might become permanently unusable.

Turn on recording for a USB storage device

1. Open the Arlo app.

2. Tap Settings > My Devices.

USB Device Storage

3. Tap the base station.

4. Tap Local Storage.

5. Select a USB storage device.

6. If the message next to the USB storage device is Requires Formatting, follow

the formatting procedure.

For information about formatting, see Format a USB storage device on page

43.

7. Tap USB Device Recording.

USB device recording toggles o and on.

Stop recording onto a USB storage device

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the base station.

4. Tap Local Storage.

5. Move the slider next to USB Device Recording to stop recording to your USB

storage device.

6. Continuous Video Recording

Continuous video recording, or CVR, is an optional feature available on Arlo Pro

2 cameras. When your Arlo Pro 2 camera is plugged in, CVR records based on the

rules that you specify. You can view recordings from any time of day and catch

anything you missed by tapping or clicking above the camera feed.

Your Arlo Pro 2 cameras can record CVR in addition to recordings that the cameras

create because of rules. Your Arlo Pro 2 camera must be plugged in for you to use

a CVR plan. If you unplug your camera, CVR starts working again when you plug the

camera back in.

Note: Your Arlo Pro 2 camera must be plugged in for you to use a CVR plan.

View the timeline

1. Make sure that your Arlo Pro 2 camera is plugged in.

2. Open the Arlo app.

3. Tap above the camera feed.

The Timeline page displays.

Green lines indicate motion recordings and blue lines indicate sound recordings.

4. To return to the Devices page, tap Back.

Navigate through the timeline

1. Make sure that your Arlo Pro 2 camera is plugged in.

2. Open the Arlo app.

3. Tap above the camera feed.

The Timeline page displays.

4. Tap and hold the timeline.

5. On a smartphone or mobile device, drag the timeline:

• To go back in time, drag the timeline to the left (either 14 or 30 days back,

depending on your CVR plan).

• To move toward more recent recordings, drag the timeline to the right.

Continuous Video Recording

Note: If you’re using a browser on a computer, click to navigate to a speciﬁc time or

click and drag to scroll through the timeline.

6. To return to the live feed, tap Go Live at the bottom. of the page

View the timeline calendar

As the camera records CVR content, it notes when motion or sound was

detected during the continuous recording. For these indicators to display in the

timeline, the camera must be using a mode such as Armed mode. For information

about modes, see Change motion sensitivity on page 23.

1. Make sure that your Arlo Pro 2 camera is plugged in.

2. Open the Arlo app.

3. Tap above the camera feed.

4. Tap Calendar

The calendar page displays a row of dates. Small green dots represent the days

that the CVR feature recorded. A large green dot represents the current day.

5. To see a more detailed view of the timeline:

• On a smartphone or mobile device, pinch and zoom. To go to landscape mode,

rotate your device or tap Enlarge.

• If you’re using a browser, click 24 hr, 1 hr, or 5 min to change your timeline

detail.

6. To hide or display the timeline, tap TIMELINE.

The timeline display toggles o and on.

7. Arlo Connect

Arlo Connect is a simple way to integrate Arlo devices into other smart home

platforms using standard and secure cloud integration.

Add Arlo Pro 2 to the Apple Home app

For the best experience, add your Arlo devices to your Arlo account before you add

them to the Apple Home app.

¾To add your Arlo devices to the Apple Home app:

1. Locate the HomeKit code.

The code is on the back cover of the Quick Start Guide that came with your Arlo

Pro 2 camera and also on the back or the bottom of your Arlo Pro base station.

2. Launch the Apple Home app.

3. Tap the Plus sign at the top of the page on the Home tab and then tap Add

Accessory.

Your Apple mobile device’s camera launches and you’re prompted to scan or

enter the HomeKit code.

4. Scan the HomeKit code using your mobile device’s camera.

If you have trouble scanning the code, tap Don’t Have a Code or Can’t Scan?

and then enter the code.

5. Complete the setup process:

• Rename your camera.

• Assign the camera to a room within HomeKit, or create a new room for your

camera.

• Add the camera to your Favorites.

6. Tap Done on the top right.

For live video, tap the Arlo Pro 2 camera screen shot.

Use Arlo with IFTTT

You can use the Arlo app with IFTTT (If This Then That), a free cloud-based service

that connects smart home devices and applications.

To add Arlo to your IFTTT app, visit ifttt.com/arlo.

To learn more about Arlo and IFTTT, visit arlo.com/community.

Use Arlo with Alexa and the Arlo Alexa skill

With Alexa and the Arlo Alexa Skill, you can access your Arlo cameras using voice

commands. Using the Arlo Alexa Skill, you can ask Alexa to show the live feed from

one of your cameras on your Echo Show or Fire TV. To take full advantage of these

features, you need a supported and connected Arlo camera and one of these

Amazon devices:

• Echo Show

• Fire TV (all generations)

• Fire TV stick (second generation only)

• Fire TV Edition smart TVs

The following Arlo cameras are compatible with the Arlo Alexa Skill:

• Arlo Wire-Free (Model VMC3030, VMS3x30)

• Arlo Q (Model VMC3040)

• Arlo Q Plus (Model VMC3040S)

• Arlo Pro (Model VMC4030, VMS4x30)

• Arlo Pro 2 (Model VMC4030P, VMS4x30P)

• Arlo Go (Model VML4030)

• Arlo Baby (Model ABC1000)

To learn more about Arlo and Alexa, visit arlo.com/community.

8. FAQs and Troubleshooting

Battery FAQs

How can I recharge the Arlo Pro 2 camera battery?

Your Arlo Pro battery is ready for use when it leaves the factory. You can use the

power adapter cable to plug the camera into an electrical outlet to charge the

battery. You can also use the Arlo Pro Charging Station (sold separately) to charge

the battery.

You can purchase a spare battery and the charging station. Then you can put

the spare battery into the Arlo Pro 2 camera while you recharge the battery. The

charging station can recharge two batteries simultaneously.

What do I need to know about using Arlo cameras in cold weather?

Cold temperatures can aect any battery’s capacity, due to the chemistry

of batteries. This means that if you install your Arlo camera outside in cold

temperatures, you might notice a shorter battery duration for the camera, or a

faster than expected drop in the displayed battery capacity.

Why does one Arlo camera battery drain faster than another Arlo camera

battery?

Your Arlo camera is ﬂexible and you can use it in a wide range of environments.

Your environment might include elements that aect battery life. Some of the

places where you might place your Arlo camera make the camera use more battery

power than others. For example:

• Arlo cameras work well in the dark using infrared sensors to monitor motion

These use more battery power than cameras monitoring motion in a well-lit

room.

• Arlo cameras work well when they are as far away as 300 feet from the base

station. Cameras positioned farther away from the base station use more

battery power than cameras positioned close to the base station.

• Arlo cameras let you choose the quality level of the videos that they record.

Cameras set to high-quality video recording use more battery power than

cameras set to low-quality video recording.

Will my WiFi environment aect my Arlo camera battery?

Yes. If you’re in a noisy WiFi environment, your Arlo camera battery might drain

faster. Use a WiFi analyzer to test the WiFi noise in your environment.

FAQs and Troubleshooting

What is the battery life for Arlo Pro rechargeable batteries?

The Arlo Pro camera rechargeable battery life is four to six months with normal

usage and can be extended if you use key settings and follow certain tips. The Arlo

Pro 2 cameras oer the best battery life when set up to record when they detect

motion.

How long does it take to charge the Arlo Pro rechargeable battery?

Charging an Arlo Pro rechargeable battery inserted into the camera from 0 to

fully charged takes about 2.5 hours. One Arlo Pro rechargeable battery inserted

into the Arlo Pro Charging Station takes about 2.74 hours to charge. Two Arlo Pro

rechargeable batteries inserted into the Arlo Pro Charging Station take about 5.43

hours to charge.

How can I extend the Arlo Pro battery life?

To extend the battery life, follow these tips:

• Check your camera’s video quality and battery usage setting. To extend your

battery life, select the Best Battery Life setting. This setting trades video

quality for improved battery life. For information about how to change the

video quality and battery usage, see Change the video quality and battery

usage on page 35.

• Normal usage is deﬁned as four minutes of viewing or recording per day with

the Arlo Pro 2 Wire-Free Camera in the Optimized setting.

• Depending on your speciﬁc usage, you might see dierent results. Also note

that a camera’s distance from the base station can aect its battery life.

Manage bandwidth for streaming

Depending on the camera’s video quality and battery usage setting, the bit

rate and upstream bandwidth requirement adjusts. The frame rate depends

whether you’re in night-vision mode or not. The default behavior for each power

management setting is as follows. Each setting starts with a particular bit rate and

frame rate.

Day Mode

• Best video. 600 kbps @ 24 fps

• Optimized. 300 kbps @ 24 fps

• Best battery Life. 200 kbps @ 24 fps

FAQs and Troubleshooting

Night Mode

• Best video. 600 kbps @ 15 fps

• Optimized. 300 kbps @15 fps

• Best battery Life. 200 kbps @15 fps

Depending on the available bandwidth and how much of the buer is full, the Arlo

Pro 2 Wire-Free system either increases the bit rate or decreases the bit rate and

frame rate.

For information about setting the video quality and battery usage for your camera,

see Change the video quality and battery usage on page 35.

Camera glare at night

This can occur if something is blocking the camera’s ﬁeld of view. If an object, wall,

or tabletop is within 2.5 inches (6.4 centimeters) of the sides or front of your

camera, that object can reﬂect infrared (IR) light back into the camera lens and

cause glare or hazy video, especially at night. These images show positioning errors

that can cause glare and foggy night vision:

If you use a skin with your camera, and the edges of the camera skin stick out far

enough, they can reﬂect IR back into the camera lens and cause glare. This is more

likely to occur with the Arlo Pro black hooded camera skin (VMA4200B).

¾To troubleshoot glare on your Arlo Pro 2:

1. Make sure that no walls, tables, or other objects are too close to your camera.

2. If you’re using a camera skin, make sure that the camera skin is pulled tight

around the camera and that the edges of the skin are ﬂat with the face of the

camera.

If glare still occurs, remove the camera skin.

Activity zones and CVR aren’t working

These Arlo Pro 2 features are available only while the camera is plugged in:

• Activity zones

• CVR

• Prebuering

Note: Connecting your Arlo Pro 2 camera to the Arlo Solar Panel (sold separately) to

charge the battery does not provide AC power. To use activity zones and CVR, you must

plug the Arlo Pro 2 camera into an AC power outlet.

Your activity zone and CVR settings persist even while the camera isn’t plugged

in—you don’t need to set up CVR or activity zones again when you plug the camera

back in.

If your camera isn’t plugged in, you can’t set up CVR or activity zones.

Can’t see video streams in a browser

The Arlo web client uses the Adobe Flash plug-in to display your camera streams in

a browser. Make sure that your browser isn’t blocking the plug-in and that you’re

using the latest version of Adobe Flash.

Your router might be blocking the ports to which Arlo sends data. To make sure

that Arlo can stay connected, you must keep ports 443 and 80 open on your router.

To troubleshoot problems with the video stream, check for the conditions in the

following sections.

WiFi signal interference

Environments with multiple WiFi networks, WiFi devices, or frequencies can cause

signal interference with your Arlo system. Minimize the number of networks,

WiFi devices, and transmitted frequencies in the area where you place your base

station and cameras.

Also, place your camera at least 1 to 3 feet (30 to 100 centimeters) from the base

station, and allow at least 6½ feet (2 meters) between cameras. Follow these

guidelines to prevent WiFi signals between the devices from interfering with each

other.

Out of range

Make sure that your wire-free camera is no farther than 300 feet (90 meters)

from the base station. The range might be less if metal objects or thick walls and

ceilings are between a camera and the base station.

Make sure that your cameras display three or four bars of signal strength in

the area where you intend to install them. The cameras can work when signal

strength is at one or two bars, but they might go out of range intermittently due

to ﬂuctuations in the environment.

Low battery

Recharge or change the battery in the Arlo Pro 2 camera to make sure that the

battery level is at least two bars. A low battery can cause the camera to stream

intermittently.

Not receiving push notiﬁcations

You must be logged in to the Arlo app to receive Arlo alerts on your smartphone

or mobile device. Arlo registers your device for push notiﬁcation when you log in. If

you used the logout option instead of simply exiting the app, you must log back in

to the app. You receive Arlo alerts even if your device is sleeping.

If you do everything described in the following sections, and are still not getting

Arlo alerts, contact Arlo Technical Support.

Check the rule settings for armed modes

Check the rules in your modes. Make sure that push notiﬁcation is enabled in the

Armed mode or in a custom mode if you created one.

¾To check push notiﬁcation in the Armed mode:

1. Open the Arlo app.

2. Tap or click Mode.

3. Select the base station.

4. Tap or click Edit next to the mode.

The Edit Rule page displays.

5. Under Alert, make sure that the Push Notiﬁcation check box is selected.

6. If you made changes, tap or click Save.

Your settings are saved.

Check the Arlo app settings on an iOS device

Make sure that you allow the Arlo app to receive push notiﬁcations. The Arlo app

push notiﬁcations can be disabled on iOS and Android devices.

¾To allow Arlo push notiﬁcations on iOS devices:

1. Tap the Settings icon for your iOS device.

2. Tap Notiﬁcations > Arlo.

The Arlo notiﬁcation settings display.

3. Make sure that Allow Notiﬁcation is selected.

4. If you made changes, tap Save.

Your settings are saved.

Check the Arlo app settings on an Android device

Make sure that you allow the Arlo app to receive push notiﬁcations. The Arlo app

push notiﬁcations can be disabled on iOS and Android devices.

¾To allow Arlo push notiﬁcations on Android devices:

1. Tap the Settings icon for your Android device.

2. Tap Application Manager > Arlo.

The Arlo notiﬁcation settings display.

3. Make sure that the Show Notiﬁcations setting is selected.

4. If you made changes, tap Save.

Your settings are saved.

If you said no to push notiﬁcations at installation

When you install the Arlo app for the ﬁrst time, to receive alerts, you must

select Allow when asked if you want Arlo to send you push notiﬁcations. For

iOS apps, after you respond to this alert, it isn’t shown again unless the device is

restored to factory settings or the app is uninstalled for at least a day.

If you said no on an iOS device, uninstall the app, wait for a day, and then

reinstall it, and allow notiﬁcations. If you don’t want to wait a day before you

FAQs and Troubleshooting

reinstall the app, you can use the system clock on your device to simulate a day.

Set the system clock forward a day or more, turn your device o, and then turn

the device back on. After you reinstall the app, return the system clock to the

correct setting.

Verify that the Arlo base station is online

Depending on the model, your Arlo base station has one LED or three LEDs on

the front, which indicate the base station status. Check the LED color. See Base

station LED guide on page 13.

If you aren’t at the same location as your Arlo base station, log in to your Arlo

account:

• If you can review the video feed from each camera, your base station is

connected to the Internet.

• If you see an error message (such as “Base Station Oine” or something similar)

instead of video feed, your base station isn’t connected to the Internet.

Base station Is oine

If you aren’t sure whether the base station is oine, see the previous section.

1. Check the Ethernet cable.

Make sure that it’s securely connected to the back of your base station and

to your router. Also make sure that you’re using the Ethernet cable that came

with your system.

2. Check the power adapter.

Make sure that the power adapter is securely connected to the back of your

base station and securely plugged into an outlet.

3. Try to connect to the Internet from another device that is connected directly

to your router.

Try to browse the Internet from a device that is connected to the router with

an Ethernet cable (you can turn WiFi o on the device to make sure that the

device is connecting through the Ethernet cable).

• If you can’t browse the Internet from this device, you must restore your

router’s connection to the Internet.

• If you can browse the Internet from this device, continue troubleshooting.

4. Power cycle your base station.

Unplug the power adapter from the outlet, wait one minute, and reconnect

the power adapter to the outlet. The base station takes one to two minutes

to start. When the Power LED and Internet LED light solid green, your base

station is connected to the Internet. If the Internet LED is amber, continue

troubleshooting.

5. Check your router’s DHCP settings and client list.

Make sure that DHCP is enabled and that router’s DCHP client list supplied an IP

address to the base station. (If it did, the base station appears in the client list.)

For more information, see your router documentation.

6. If you were previously able to connect your base station to the Internet but

now can’t connect, check the router’s security settings and ﬁrmware to make

sure that no changes were made since the last time it successfully connected.

You might want to temporarily lower the security settings on the router

or temporarily place the base station in the DMZ to rule out any ﬁrewall

restrictions. If you make these changes, power cycle your base station as

described in Step 4.

7. Check to make sure that ports 443 and 80 are open on your router.

If you don’t manage your Internet environment, contact your IT department for

assistance with any ﬁrewall or router conﬁgurations. The Arlo base station can’t

connect through most proxy servers. Check with your IT team and Internet

service provider (ISP) about ways to bypass any proxy servers. Ask your IT team

to make sure that ports 443 and 80 are open.

8. Perform a factory reset on your base station.

For more information, see Reset the Arlo base station to factory settings on

page 58.

If you’re still unable to get your base station to connect, visit support.arlo.com and

submit a support case describing the steps you took and provide the following

information:

• Base station serial number

• User name (email address used to register your Arlo account)

• Internet service provider (ISP) name

• Internet connection type (DSL, cable, and so on) and speed (Arlo requires at

least 1 Mbps upstream)

• Internet router model

• List of other devices connected directly to your router

• The last time and place that your base station successfully connected to the

Internet

Signal strength

If an Arlo Pro 2 camera’s signal to the base station is weak, recording delays might

occur when motion is detected.

To test whether the camera signal is strong enough, check the camera LED on the

base station. If it’s blinking amber, the base station detects a low data rate, which

means that a camera is too far from the base station.

Follow these tips to increase signal strength:

• Position your base station so that it’s central to all of your cameras.

• Position your camera within 300 feet (90 meters) of the base station.

The maximum line-of-sight range of 300 feet is reduced by each wall, ceiling, or

other large obstruction between the camera and base station. These materials

reduce signal strength the most:

• Unusually thick walls and ceilings

• Brick

• Concrete

• Stone

• Ceramic

• Glass, especially mirrors

• Metal

• Large quantities of water, such as the water in a ﬁsh tank or water heater

• Mount your cameras away from devices such as cordless phone bases, baby

monitors, and microwave ovens.

• Don’t place your Arlo system near multiple WiFi routers. Other WiFi-enabled

devices can interfere with Arlo’s wireless signal.

Reset the Arlo base station to factory settings

Performing a factory reset returns your base station values to the default settings

and removes the base station from your Arlo account.

1. To reset the base station, use a straightened paper clip to press and hold the

Reset button on the back of the base station for about 10 seconds.

The base station resets. The LED behavior during the reset depends on your

base station model.

• Base station with one LED. on the front The LED blinks alternating blue

and amber.

• Base station with three LEDs on the front. The LEDs blink amber.

The base station reboots.

2. Wait for the base station to ﬁnish rebooting before you unplug it, turn it o, or

use the Arlo app to set it up.

Note: To add the base station to your Arlo account and set it up, open the Arlo app and tap

Add New Device. You might need to add the cameras to the base station again.

9. Rechargeable Battery Safety

Safety rules for Arlo Pro rechargeable batteries

Arlo Pro Wire-Free HD Security Cameras use rechargeable batteries and can go

wherever you need them. But ALL batteries can EXPLODE, CATCH FIRE, and CAUSE

BURNS if disassembled, punctured, cut, crushed, short-circuited, incinerated, or

exposed to water, ﬁre, or high temperatures, so you need to handle them with care.

To use Arlo Pro rechargeable batteries safely, follow these guidelines:

• ALWAYS store spare batteries in a cool, dry, ventilated area.

• ALWAYS make sure that the battery compartment is clean and free of any

debris before inserting new batteries.

• ALWAYS make sure the battery contacts are aligned.

• ALWAYS keep all batteries away from children.

• ALWAYS follow local waste and recycling laws when throwing used batteries

away.

• ALWAYS use an Arlo Pro power adapter or an Arlo Pro Charging Station (sold

separately) to charge Arlo Pro rechargeable batteries.

• NEVER place Arlo Pro rechargeable batteries in a pocket, purse, or other

receptacle, especially those containing metal objects.

• NEVER store Arlo Pro rechargeable batteries with hazardous or combustible

materials.

• NEVER let an Arlo Pro rechargeable battery or battery compartment get

wet—before, during, or after installation. (Remember that your camera itself is

weatherproof, but its interior battery compartment and batteries aren’t.)

• NEVER disassemble, cut, crush, puncture, short-circuit, dispose of an Arlo Pro

rechargeable battery in ﬁre or water, or expose your battery to temperatures

above 60°C (140°F).

Rechargeable Battery Safety

Safety rules for the Arlo Pro Charging Station

The Arlo Pro Charging Station is sold separately. You can use the charging station

to charge one or two Arlo Pro rechargeable batteries. For more information about

the Arlo Pro Charging Station, see the instructions that are included in the Arlo Pro

Charging Station package.

When using the Arlo Pro Charging Station, follow these guidelines to avoid personal

injury and property damage from, but not limited to, the risk of electric shock or

ﬁre:

• Charge only Arlo Pro rechargeable batteries compatible with the Arlo Pro

Charging Station. Charging other batteries might cause them to leak, rupture,

or explode.

• Use the charger only in dry locations. Keep it away from rain, snow, or excessive

moisture.

• Do not operate the charging station if it or its cord is damaged.

• Do not disassemble or modify or attempt to use it as a power source.

• Do not disassemble the battery, dispose of the battery in ﬁre, put the battery in

backward, mix it with used or other battery types, or short-circuit the battery.

The battery might ignite, explode, leak, or get hot, causing injury.

Table of Contents

NETGEAR VMC4030P User Manual

Related Manuals

NETGEAR NETGEAR Manual

NETGEAR NETGEAR Manual

NETGEAR AGM731F Manual

NETGEAR ProSafe GS724TR Manual

NETGEAR GS608-300PES Manual

NETGEAR N600 Manual

NETGEAR GSM7248 Manual

NETGEAR WN2500RP Manual