Philips 6915030PU User Manual
Displayed below is the user manual for 6915030PU by Philips which is a product in the Mood Lighting category. This manual has 3 pages.
Related Manuals
User Manual LivingColors Mini
Unpacking and Installing
If you unpack a LivingColors, you only need to plug the cable into the back of the product, connect it to the power system and start the
experience!
=++
Step 1: Place your LivingColors in a selected location on a at and stable surface and direct it to the wall.
Step 2: Plug the cable into the back of the product.
Step 3: Plug your LivingColors into the power system.
Getting started with your LivingColors
Basic functionality
Turn the LivingColors “On” or “Off”:
Your LivingColors can be turned “On” and “Off” by using the “I”- and “0”-button on the back of the product. If you turn the LivingColors
“Off”, it will remember your last setting for the next time you use it.
Colour selection:
To let your LivingColors change to whatever colour you like, simply select the colour on the colour circle by touching it. If you sweep
around the colour circle with your nger (without taking it off) you will be able to ne-tune your selected colour and get the full range of
256 different colour options.
Extended functionality
Automatic Colour Change Mode:
You can also let your LivingColors change colours automatically. Hold the “I”-button on the back of the product for 5 seconds.
The Automatic Colour Change Mode will now start looping through the colours.
5 sec =
To exit the Automatic Colour Change Mode, simply switch off the LivingColors using the “0”-button. Then use the “I”-button to
witch it on again. The Automatic Colour Change Mode is now stopped.
=
Problem solving
Reset the luminaire by unplugging it from the power network. Wait for 30 sec and plug it back in.