Philips Screeneo S6 User Manual
Displayed below is the user manual for Screeneo S6 by Philips which is a product in the Data Projectors category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/support
Home Projector
SCN650
Screeneo S6
EN User Manual
FR Manuel utilisateur
DE Bedienungsanleitung
ES Manual del usuario
IT Manuale d’uso
PT Manual do Utilizador
NL Gebruiksaanwijzing
CZ Návod k použití
User Manual
Register your product and get support at
www.philips.com/support
Home Projector
SCN650
Screeneo S6
Introduction �������������������������������������������������3
Dear customer ...............................................................3
About this user manual ..............................................3
What’s in the box ..........................................................3
Customer service centre ............................................3
1 General safety information ��������������� 4
Setting up the product .............................................. 4
Repairs ............................................................................ 4
Power supply .................................................................5
2 Overview ������������������������������������������������5
Top/Front view ..............................................................5
Rear view ........................................................................ 6
Remote control............................................................. 6
3 Initial operation ������������������������������������7
Placement .......................................................................7
Change screen size ..................................................... 8
Connect power supply .............................................. 9
Prepare the remote control ..................................... 9
Power on and setup ................................................... 9
First time setup ...........................................................10
4 Use home screen �������������������������������� 12
Access on-screen help ............................................. 12
Access online services .............................................. 12
5 Bluetooth streaming �������������������������� 13
Stream from Bluetooth device .............................. 13
Stream to Bluetooth speaker .................................14
6 Connect to playback devices ����������� 15
Connect to devices through HDMI .......................15
Connect to devices through HDMI ARC ............. 15
Connect to devices through S/PDIF .................... 16
7 Browse storage devices ��������������������16
Play video from storage devices ........................... 17
Play music from storage devices .......................... 17
Play photo from storage devices .......................... 17
8 Wireless projection ��������������������������� 17
Wireless projection with iOS devices .................. 17
Wireless projection with Mac ................................. 17
Wireless projection with Android devices .........18
Wireless projection with Windows PC ................18
9 Change settings ����������������������������������19
Language and input settings .................................19
Picture settings ............................................................19
Sound settings .............................................................19
Power control settings ............................................. 20
Restore default settings ..........................................20
Clear memory storage .............................................20
Check memory ...........................................................20
10 Service �������������������������������������������������20
Cleaning ........................................................................20
Update software ......................................................... 21
Troubleshooting ......................................................... 22
11 Appendix ��������������������������������������������� 24
Technical data ............................................................ 24
CE statement .............................................................. 25
FCC statement ............................................................ 25
Other notice .................................................................26
Table of contents
Introduction 3
Introduction
Dear customer
Thank you for purchasing this projector.
We hope you enjoy this product and the many
functions it offers!
About this user manual
The quick start guide supplied with this product
allows you to start using this product quickly
and easily. Detailed descriptions can be found
in the following sections of this user manual.
Read the entire user manual carefully. Follow
all safety instructions in order to ensure proper
operation of this product (see General safety
information, page 4). The manufacturer
accepts no liability if these instructions are not
followed.
Symbols used
Notice
Troubleshooting
This symbol indicates tips that will help
you in using this product more effectively
and easily.
DANGER!
Danger of personal injury!
This symbol gives warning of danger
of personal injury. Physical injury or
damage can result from improper
handling.
CAUTION!
Damage to the product or loss of data!
This symbol gives warning of damage
to the product and possible loss of
data. Damage can result from improper
handling.
What’s in the box
a Screeneo S6 projector (SCN650)
b Remote control with 2 AAA batteries
c AC power cable with plug x 4
d Power adapter
e Quick Start Guide
Quick Start
Guide
ab
c
d
e
Customer service centre
You can find the support hotline in the warranty
card or online:
Web: www.philips.com/support
Mail: philips.projector.eu@screeneo.com
International Phone: +43 720 778 370
Please ask your provider for international call
costs!
4 Philips · Screeneo S6
1 General safety
information
Take note of all warning and safety notes
indicated. Do not make any changes or settings
that are not described in this user manual.
Incorrect operation, and improper handling can
lead to physical injury, damage to the product
or loss of data.
Setting up the product
This product is for indoor use only. Place the
product securely on a stable, flat surface.
To help avoid possible injuries to persons or
damage to the product itself, position all cables
in such a way that no one will trip over them.
The product shall not be installed on bare
ground.
Do not operate the product in damp rooms.
Never touch the mains cable or the mains
connection with wet hands.
Never operate the product immediately after
moving it from a cold location to a hot location.
When the product is exposed to such a change
in temperature, moisture may condense on the
crucial internal parts.
The product must have sufficient ventilation
and must not be covered. Do not put the
product in closed cabinets, boxes, or other
enclosures when in use.
Do not place the product on soft surfaces such
as tablecloths or carpets and do not cover the
ventilation slits. Otherwise the product could
overheat or catch fire.
Protect the product from direct sunlight,
heat, intense temperature fluctuations and
moisture. Do not place the product in the
vicinity of heaters or air conditioners. Observe
the information on temperature listed in the
technical data (see Technical data, page
24).
Prolonged operation of the product causes the
surface to become hot. In case of overheating,
the product automatically switches to standby
mode.
Do not allow liquids to leak into the product.
Turn off the product and disconnect it from the
mains supply if liquids or foreign substances
leaked into the product. Have the product
inspected by an authorised service centre.
Always handle the product with care. Avoid
touching the lens. Never place heavy or sharp
objects on the product or on the power cable.
If the product gets too hot or emits smoke,
shut it down immediately and unplug the
power cable. Have your product checked by
an authorised service centre. Keep the product
away from open flames (e.g. candles).
DANGER!
Risk of explosion with incorrect type
of batteries!
There is a risk of explosion if the wrong
battery type is used.
Do not expose the batteries (battery pack or
embedded batteries) to excessive heat such as
sunshine, or open fire.
Under the following conditions, a layer of
moisture can appear inside the product which
can lead to malfunctions:
• if the product is moved from a cold to a
warm area;
• after a cold room is heated;
• when the product is placed in a damp
room.
Proceed as follows to avoid any moisture
buildup:
1 Seal the product in a plastic bag before
moving it to another room, in order for it to
adapt to room conditions.
2 Wait one to two hours before you take the
product out of the plastic bag.
The product should not be used in a very dusty
environment. Dust particles and other foreign
objects may damage the product.
Do not expose the product to extreme
vibrations. This may damage the internal
components.
Do not allow children to handle the product
without supervision. The packing materials
should be kept out of the hands of children.
For your own safety, do not use the product
during thunderstorms with lightning.
Repairs
Do not repair the product yourself. Improper
maintenance can result in injuries or damage to
the product. The product must be repaired by
an authorised service centre.
Please find the details of authorised service
centres on the warranty card supplied with this
product.
Overview 5
Do not remove the type label from this product,
as this will void the warranty.
Power supply
Use only a power adapter which is certified for
this product (see Technical data, page 24).
Check whether the mains voltage of the power
supply matches the mains voltage available at
the setup location. This product complies with
the voltage type specified on the product.
The power outlet shall be installed near the
product and shall be easily accessible.
CAUTION!
Always use the button to turn
the projector off. This is essential to
prevent damage to the LED lamp.
Turn off the product and unplug from the
power outlet before cleaning the surface of
the product (see Cleaning, page 20). Use a
soft, lint-free cloth. Never use liquid, gaseous
or easily flammable cleaners (sprays, abrasives,
polishes, alcohol). Do not allow any moisture to
reach the interior of the product.
DANGER!
Risk of eye irritation!
This projector is equipped with a long-
life LED lamp, which emit very bright
light. Do not look directly into the
projector lens during operation. This
could cause eye irritation or damage.
2 Overview
Top/Front view
a
b
c
d
e
a Power button
• Press once to switch the projector on
• Press twice within one second to switch
the projector to standby.
CAUTION!
Always use the button to turn off the
projector.
This is essential to prevent
damage to the LED lamp.
b LED indicator
• Turn white when the projector is
switched on.
• Turn red when the projector is switched
to standby.
• Turn blue when the projector is in
Bluetooth mode, used for streaming
music from a Bluetooth device.
c Projection lens
d Autofocus camera
e Front IR sensor
6 Philips · Screeneo S6
Rear view
befg
h
ij d c a
a Vents
b DC socket
Connect to the power supply.
c S/PDIF connector
Connect to an optical input on a playback
device.
d LAN port
Connect to a LAN port on a broadband
modem or router.
e HDMI 2 connector
Connect to an HDMI output on a playback
device.
f HDMI 1/ARC connector
• Connect to an HDMI output on a
playback device.
• Connect to a home theater system or AV
receiver through HDMI ARC connector
for audio output from the projector.
g USB 3�0 port
Connect to a USB storage device for media
play.
h USB 2�0 port
Connect to a USB storage device for media
play.
i SERVICE (Mini USB port)
For use by the service centre only.
j Rear IR sensor
Remote control
a
b
d
e
f
g
h
c
l
m
n
k
j
i
a
• Press once to switch the projector on
• Press twice within one second to switch
the projector to standby.
• When the projector is switched on, the
LED turns white. When the projector is
in standby, the LED turns red.
CAUTION!
Always use the button to turn off the
projector.
This is essential to prevent
damage to the LED lamp.
b
Access the settings menu.
c
Confirm a selection or entry.
d (Android menu button)
• When browsing apps, access more
options.
• When playing media, access more
options.
e
Enable or disable on-screen pointer.
f
Increase or decrease volume.
Initial operation 7
g
Adjust image sharpness.
h Color buttons
Select tasks or options when using
application services.
i
Mute or restore volume.
j
Access the home screen.
k
Press to access Bluetooth settings
l
Return to a previous menu screen.
m Navigation buttons
• Navigate menu options.
• Press / to change a selection.
n
• Access and select an input source.
• Access and select a brightness option.
• Access and select an audio output
mode.
• Access and select a color option during
video play.
3 Initial operation
Placement
You can install the projector in four different
configurations. Follow the guidelines below for
different projector placement.
Notice
For overhead mounting on ceiling,
purchase a projector mount
recommended by an installation
professional and follow the instructions
that come with the mount.
Before mounting on the ceiling, make
sure the ceiling can support the weight
of the projector and mounting kit.
For ceiling installation, this product
must be securely attached to the ceiling
in accordance with the installation
instructions. An improper ceiling
installation may result in accident, injury
or damage.
Front table
1 Place the projector on a table in front of the
projection screen. This is the most common
way to position the projector for quick
setup and portability.
2 To adjust projection to the correct position,
make sure both the Ceiling and Rear
options for projection mode are disabled
(press , and go to Image -
Ceiling and Rear).
8 Philips · Screeneo S6
Front ceiling
1 Mount the projector on the ceiling with
upside up in front of the projection screen.
A projector mount is required to mount the
projector on ceiling.
2 To adjust projection to the correct position,
enable the Ceiling option and disable the
Rear option for projection mode (press
, and go to Image - Ceiling and
Rear).
Rear table
1 Place the projector on a table behind the
projection screen. A special rear projection
screen is required.
2 To adjust projection to the correct position,
Enable the Rear option and disable the
Ceiling option for projection mode (press
, and go to Image - Ceiling and
Rear).
Rear ceiling
1 Mount the projector on ceiling with upside
up behind the projection screen. To mount
the projector on ceiling behind the screen,
a projector mount and a special rear
projection screen is required.
2 To adjust projection to the correct position,
enable both the Ceiling and Rear options
for projection mode (press , and
go to Image - Ceiling and Rear).
Change screen size
The projection screen size (or size of images) is
determined by the distance between the lens
of the projector and the projection surface.
• The minimum and maximum projection
distance is 30 cm and 450 cm.
• Note the relationship between screen sizes
(diagonal sizes) and projection distances.
Screen size Projection distance
19” 50 cm
38” 100 cm
75” 200 cm
113” 300 cm
151” 400 cm
Recommended sizes
Environment Screen
size
Distance
Daylight living room 64” 177 cm
Evening living room 100” 185 cm
Home theatre (dark) 160” 293 cm
Maximum recommended
size
190” 350 cm
Initial operation 9
Connect power supply
CAUTION!
Always use the button to turn off the
projector.
This is essential to prevent
damage to the LED lamp.
1 Select a supplied power cable with an
appropriate power plug (EU, UK, US, CH).
2 Connect the power adapter with the power
cable to the socket (DC input) on
the projector, and then to the wall outlet.
a
S/PDIF
SERVICE HDMI2HDMI1/ARC
S/PDIF
SERVICEHDMI2HDMI1/ARC
b
c
Prepare the remote control
CAUTION!
The improper use of batteries can
lead to overheating, explosion, risk of
fire and injury. Leaking batteries can
possibly damage the remote control.
Never expose the remote control to
direct sunlight.
Avoid deforming, dismantling or
charging the batteries.
Avoid exposure to open fire and water.
Replace empty batteries immediately.
Remove the batteries from the remote
control if not in use for long periods of
time.
1 Open the battery compartment.
2 Insert the supplied batteries (type AAA)
with correct polarity (+/-) indicated.
3 Close the battery compartment.
• When using the remote control, point
the remote control at the IR sensor on
the projector, and make sure there is no
obstacle between the remote control and
the IR sensor.
Power on and setup
CAUTION!
Always use the button to turn off he
projector.
This is essential to prevent
damage to the LED lamp.
1 Press once (or the power button on the
projector) to turn on the projector. The LED
on the projector turns from red to white.
• The distance between the projector and
the screen determines the actual size of
the image.
Switch to standby
Press twice within one second to switch the
projector to standby. The LED on the projector
turns from white to red.
10 Philips · Screeneo S6
Image shape correction
You can correct distorted images to be
rectangular or square. Two image correction
methods are available.
Keystone correction
1 Press to access the settings
menu.
2 Use the Navigation buttons and OK to
select Image - Keystone Correction.
3 Press / to adjust the screen position.
4 To exit correction mode, press or .
Customized correction
1 Press to access the settings
menu.
2 Use the Navigation buttons and OK to
select Image - Custom Correction.
3 Use the Navigation buttons and OK to
select and change a screen corner position.
If needed, repeat the same step to change
the position for other three screen corners.
4 To exit correction mode, press or .
Notice
For the best and optimal image quality,
the projector should always be in front
of the projection screen.
Image focus adjustment
You can adjust image focus or clearness.
1 Press the button on the remote
control to adjust image focus. To fine tune
focus, press the or button.
Screeneo S6
• Auto focus adjustment is also available.
You can enable or disable auto focus
adjustment. Press and go to
Image - Autofocus Settings. If enabled, the
projector will re-focus automatically when
you reposition the projector.
First time setup
When you turn on the projector for the first
time, you are prompted to make the following
initial setup.
Step 1: set up the language
1 When Step 1 interface is displayed, use the
Navigation buttons and OK on the remote
control to access Select Language & Time
Zone. The following
Language & Input
menu appears.
• Language: Select your desired language for
on-screen menus.
Initial operation 11
• Time Zone: Select your time zone.
• Keyboard Input Method: Select English
keyboard or Gboard.
2 When the settings are made, press to
return to Step 1 interface and select Next to
proceed to Step 2 interface.
Notice
If you select Gboard as your input
method, you need to activate on-screen
pointer feature before you can input
text through pop-up virtual Gboard (see
Step 2: activate on-screen pointer, page
11).
Step 2: activate on-screen
pointer
Activate the on-screen pointer (mouse cursor)
to replace the function of the Navigation
buttons on the remote control. The on-screen
pointer is required when you input text through
pop-up virtual Gboard and browse the Internet.
Before you can use the on-screen pointer, pair
the remote control with the projector.
1 When Step 2 is displayed, follow the on-
screen instructions: press and hold
and on the remote control simultaneously
for 5 seconds.
2 Release the buttons and wait until the
remote control is paired with the projector,
as indicated in the setup interface.
To use on-screen pointer
1 When the remote control is paired with the
projector, press on the remote control to
display or cancel the on-screen pointer.
2 When the pointer (angled arrow) is
displayed on the projection screen, hold
and move the remote control in the air,
then the pointer moves across the screen
correspondingly.
3 Press the OK button on the remote control
to confirm selection.
4 The on-screen pointer is disabled if you
press the Navigation button on the remote
control. To enable the on-screen pointer
again, press .
Step 3: set up the Wi-Fi network
Set up the Wi-Fi network to access online
applications and screen mirroring.
What you need
• A wireless network router.
• For best wireless performance and
coverage, use an 802.11n router (“Wi-Fi 4”).
1 When the Wi-Fi settings menu appears as
Step 3, select your network name from the
network list.
2 The network password input bar and the
virtual keyboard pop up.
• To input your password through
Gboard, use on-screen pointer (see
Step 2: activate on-screen pointer,
page 11).
3 After you input the password for the
network, select Connect on the screen to
complete the Wi-Fi setup.
Step 4: accept EULA
After the Wi-Fi network is set up, EULA (End
User License Agreement) appears. Read and
accept the Agreement to complete the initial
setup.
12 Philips · Screeneo S6
Set up the wired network
If the wireless network does not work properly,
connect the projector to Internet through the
wired network.
What you need
• A network router
• A network cable
1 Using a network cable, connect the
connector on the projector to the network
router.
2 Press on the remote control.
3 Select and access the Ethernet Connection
settings.
4 Follow on-screen instructions to complete
the setup.
Notice
A network connection is required for use
of screen mirroring feature.
4 Use home screen
The home screen provides easy access to a
wide range of Internet applications, setup and
other useful features on the projector.
Access on-screen help
For easy access, on-screen help (user manual)
is stored on the projector.
1 Press the Navigation buttons on the remote
control to select the user manual link on the
home screen.
2 Press OK on the remote control to access
the user manual.
Access online services
Some pre-loaded Internet applications are
available on the home screen.
• Before access to the applications, make
sure the projector is connected to Internet.
Press and go to Wi-Fi or
Ethernet Connection.
• Use the Navigation buttons and OK on
the remote control to select and open an
application.
• You may add or remove an application on
the home screen by installing or uninstalling
an application.
• To browse, search and install applications,
access Aptoide TV app store on the home
screen.
• To uninstall applications on the home
screen, select an application, then press
on the remote control to access the
Uninstall option.
Bluetooth streaming 13
Use on-screen pointer
The on-screen pointer is required for the
following cases (see Step 2: activate on-screen
pointer, page 11 ).
• Activate letter selection from pop-up virtual
Gboard keyboard.
• Select a service item on web pages, e.g.
web link selection, and activation of text
input in the URL or search bar.
Input text on web pages
1 Move the on-screen pointer in the text
field, e.g. URL or search bar.
2 Press OK on the remote control. The text
cursor appears in the text field.
3 Use the pop-up virtual keyboard (English
keyboard or Gboard) to input text.
Customize home screen
wallpaper
1 Select on the upper right of the home
screen, then press OK to access the settings
options.
2 Select the Change Wallpaper option, then
use the left and right arrow buttons on the
screen to select a pre-saved picture as
background on the home screen.
5 Bluetooth
streaming
Through Bluetooth of the projector, you can
listen to music in the following ways.
• Stream music from a Bluetooth device to
the projector.
• Stream music from the projector to an
external Bluetooth speaker.
Stream from Bluetooth
device
Through Bluetooth, you can wirelessly stream
music to the projector from a Bluetooth device
(e.g. a smartphone or tablet).
Before you use the projector with a Bluetooth
device for the first time, pair it with the
Bluetooth device.
Notice
The effective operation range between
the projector and the Bluetooth device is
approximately 10 meters (30 feet).
The music streaming may be interrupted
by any obstacles between the Bluetooth
device and the projector.
1 Make sure the projector is in standby, and
the LED on the projector turns red.
• Make sure Bluetooth of the projector in
standby is enabled (press
and go to Sound - Bluetooth speakers).
2 On your Bluetooth device, enable Bluetooth
and search for the devices that can be
paired (see your device user manual for
details).
3 Select “Philips Screeneo S6” on your
Bluetooth device to pair with.
• When the Bluetooth pairing succeeds,
the LED on the projector turns from red
to blue.
4 Play audio on your Bluetooth device. The
audio streams to the projector.
14 Philips · Screeneo S6
Bluetooth re-connection
• The projector is re-connected to the last
connected device automatically when the
projector is in Bluetooth mode (in standby).
• To disable automatic re-connection with
the Bluetooth device, turn off Bluetooth
function in standby (press and
go to Sound - Bluetooth speakers).
Connection to a second Bluetooth device
You need to disable Bluetooth on the currently
connected device, and then pair a second
Bluetooth device with the projector.
Stream to Bluetooth speaker
Through Bluetooth, you can wirelessly stream
music from the projector to a Bluetooth
speaker.
Before you use the projector with a Bluetooth
speaker for the first time, pair it with the
Bluetooth speaker.
Notice
The effective operation range between
the projector and the Bluetooth device is
approximately 10 meters (30 feet).
The music streaming may be interrupted
by any obstacles between the Bluetooth
device and the projector.
1 Turn on your Bluetooth speaker.
2 Enable Bluetooth on the projector. Press
to access the Bluetooth settings.
3 In the Bluetooth settings interface of the
projector, select your Bluetooth speaker
name from the Bluetooth device list.
4 The projector is connected to your
Bluetooth speaker. Audio from the projector
streams to your Bluetooth speaker.
Quick access to turn Bluetooth on/off
Press to display the Bluetooth settings,
then press OK to turn Bluetooth on or off.
Bluetooth re-connection
The projector is re-connected to the last
connected speaker automatically when the
connected speaker is turned on.
Connection to a second Bluetooth speaker
You need to disable Bluetooth on the currently
connected speaker, and then pair a second
Bluetooth speaker with the projector.
Connect to playback devices 15
6 Connect to
playback
devices
Connect to devices through
HDMI
Connect a playback device (e.g. a Blu-ray
player, gaming console, camcorder, digital
camera or PC) to the projector through HDMI
connection. With this connection, images are
shown on the projection screen, and audio is
played on the projector.
1 Using an HDMI cable, connect the HDMI1
or HDMI2 connector on the projector to the
HDMI output on the playback device.
S/PDIF
SERVICE HDMI2HDMI1/ARC
S/PDIF
SERVICEHDMI2HDMI1/ARC
2 Press to access and select
HDMI 1 or HDMI 2 input source.
Connect to devices through
HDMI ARC
Connect an audio system (e.g. a home
cinema system, AV receiver or sound bar) to
the projector through HDMI ARC connection.
With this connection, audio is streamed to the
connected audio system.
1 Using an HDMI cable, connect the HDMI1/
ARC connector on the projector to the
HDMI ARC on the audio system.
• The HDMI ARC connector on the audio
system might be labeled differently. See
the user manual of your audio system
for details.
S/PDIF
SERVICE HDMI2HDMI1/ARC
S/PDIF
SERVICEHDMI2HDMI1/ARC
16 Philips · Screeneo S6
Connect to devices through
S/PDIF
Connect a digital device (e.g. a home cinema
system or sound bar) to the projector through
S/PDIF connection. With this connection, audio
is streamed to the connected digital device.
1 Using an S/PDIF optical cable, connect the
S/PDIF connector on the projector to the S/
PDIF input on the digital device.
• S/PDIF input on the digital device might
be labeled OPTICAL or OPTICAL IN.
S/PDIF
SERVICE HDMI2HDMI1/ARC
S/PDIF
SERVICEHDMI2HDMI1/ARC
7 Browse storage
devices
Through the projector, you can access and play
the pictures, audio and video files stored on the
local storage and connected storage devices
(e.g. a USB flash drive, HDD, camcorder or
digital camera).
1 Using a USB cable, connect the port
(either USB 2.0 or USB 3.0) on the projector
to the USB port on your storage device.
• The USB 3.0 port provides faster data
transfer speed.
S/PDIF
SERVICE HDMI2HDMI1/ARC
S/PDIF
SERVICEHDMI2HDMI1/ARC
2.0
3.0
2 On the home screen (press ), press the
Navigation buttons to select located on
the upper right of the screen, then press OK
to access the options.
3 Select File Manager, and select your
connected device or local storage when
prompted for device selection.
4 The content browser is displayed. Use the
navigation buttons and OK on the remote
control to select and open files.
To copy/cut/delete files
Select a file, and then press on the remote
control to access the editing options.
To paste files
Copy a file and navigate to a folder, then press
on the remote control to access the Paste
options.
Wireless projection 17
Play video from storage
devices
The supported file formats are listed in the
“Technical data” section (see Technical data,
page 24).
1 Select a video file from the content browser,
and press OK. Then select the video player
from the app list to play video.
2 During play, you can access the following
playback control.
• To pause or resume play, press OK.
• To fast backward or forward, press / .
• To access play list, play mode or aspect
ratio, press on the remote control,
then press / to select an option.
Play music from storage
devices
The supported file formats are listed in the
“Technical data” section (see Technical data,
page 24).
1 Select a music file from the content
browser, and press OK. Then select the
music player from the app list to play music.
2 During play, you can access the following
playback control.
• To pause or resume play, press OK.
• To select a previous or next track, press
/ .
• To fast backward or forward, press / .
• To access play list or play mode, press
on the remote control, then press
/ to select an option.
Play photo from storage
devices
The supported file formats are listed in the
“Technical data” section (see Technical data,
page 24).
1 Select a photo file from the file browser,
then press OK to display the photo.
2 When a photo is displayed, you can access
the following playback control.
• To select a previous or next photo,
press / .
• To select a slideshow with different
intervals, press .
8 Wireless
projection
This projector allows you to wirelessly mirror
the following devices to the projection screen.
• iOS devices
• Mac
• Android devices
• Windows PC
Wireless projection with
iOS devices
What you need
• Enable Wi-Fi both on the projector and
your iPhone.
• Make sure the projector and your iPhone
are in the same Wi-Fi network.
1 Press on the remote control to
access the settings options.
2 Select Mirroring to access the mirroring
interface. The mirroring function on the
projector is enabled now.
3 On your iPhone, access ‘Control Center’ by
sliding the screen up, and select the ‘Screen
Mirroring’ option. Then select the projector
name under ‘Screen Mirroring’ to connect
your iPhone to the projector.
4 After successful connection, the screen
content of your iPhone is cast to the
projection surface.
Wireless projection with
Mac
What you need
• Enable Wi-Fi both on the projector and
your Mac.
• Make sure the projector and your Mac are
in the same Wi-Fi network.
1 Press on the remote control to
access the settings options.
2 Select Mirroring to access the mirroring
interface. The mirroring function on the
projector is enabled now.
18 Philips · Screeneo S6
3 On your Mac, access the screen mirroring
option located on the top of the computer
screen, then select the projector name to
connect your Mac to the projector.
4 After successful connection, the screen
content of your Mac is cast to the projection
surface.
Wireless projection with
Android devices
What you need
• Visit www.hpplay.com.cn. Download and
install the HappyCast app for Android on
your Android device.
• Enable Wi-Fi both on the projector and
your Android device.
• Make sure the projector and your Android
devices are in the same Wi-Fi network.
1 Press on the remote control to
access the settings options.
2 Select Mirroring to access the mirroring
interface. The mirroring function on the
projector is enabled now.
3 Launch the HappyCast app on your Android
device. In the app, select the projector
name from the device list to connect your
Android device to the projector.
4 Enable the mirroring function in the app.
The screen content of your Android device
is cast to the projection surface.
Wireless projection with
Windows PC
What you need
• Visit www.hpplay.com.cn. Download and
install the HappyCast app for Windows on
your Windows PC.
• Enable Wi-Fi both on the projector and
your Windows PC.
• Make sure the projector and your Windows
PC are in the same Wi-Fi network.
1 Press on the remote control to
access the settings options.
2 Select Mirroring to access the mirroring
interface. The mirroring function on the
projector is enabled now.
3 Launch the HappyCast app on your
Windows PC. In the app, select the
projector name from the device list to
connect your Windows PC to the projector.
4 Enable the mirroring function in the app.
The screen content of your Windows PC is
cast to the projection surface.
Change settings 19
9 Change settings
This section helps you change the settings of
the projector.
Language and input settings
1 Press .
2 Select Language & Input, and then press
OK to access the language and input
options.
3 Use the Navigation buttons and OK to
select and change:
• Language: Select your desired language
for on-screen menus.
• Time Zone: Select your time zone.
• Keyboard Input Method: Select English
keyboard or Gboard.
Picture settings
1 Press .
2 Select Image, and then press OK to access
the picture options.
3 Use the Navigation buttons and OK to
select and change:
• Brightness mode: Select a predefined
color brightness setting for picture and
video display. The different settings are
optimized to enable you to use your
projector in all situations:
• Standard: Use this for day-time
viewing in the presence of some
ambient light, e.g. from typical
home/office fluorescent lamps or
sunlight.
• Cinema: Optimised for life-like
cinematic color. Ideal for dark
environments with low ambient
light,e.g. home theater.
• Presentation: Provides high
brightness, and improves text
legibility.
• User: In this mode you can configure
your own color balance between
red, green and blue.
• Autofocus Settings: Enable or disable
autofocus function.
• Keystone Correction: Correct keystone
or distorted images to be rectangular or
square.
• Custom Correction: Adjust image shape
according to your need.
• FlowMotion: Switch MEMC (motion
estimation motion compensation) for
motion interpolation to alleviate display
motion blur.
To access color mode
During video play, press on
the remote control, then use the Navigation
buttons and OK to access the color setting and
its options.
• Color: Select a predefined color setting for
picture and video display. This setting is
independent of the brightness mode. The
different modes are optimised for different
source content and playback environments:
• Vivid: Improves picture quality in the
presence of high ambient light by
increasing the color saturation.
• Normal: Balanced colors for general
viewing.
• Soft: Improves comfort in dark
environments by reducing picture
brightness.
• Game: Reduces reaction time and turns
off FlowMotion.
• User: In this mode you can
configure your own picture
settings like brightness, contrast,
saturation,sharpness etc.
Sound settings
1 Press .
2 Select Sound, and then press OK to access
the sound options.
3 Use the Navigation buttons and OK to
select and change:
• Audio Output: Select an audio format
for sound output when the projector is
connected through the digital connector
(S/PDIF).
• PCM: The connected audio device
does not support multi-channel
format. Audio is downmixed to two-
channel sound.
• RAW: Select the original audio
output.
• System Sounds: Turn the system sounds
on or off.
20 Philips · Screeneo S6
• Bluetooth speakers: Enable or disable
Bluetooth connection when the
projector is in standby.
Power control settings
1 Press .
2 Select Power, and then press OK to access
the power control options.
3 Use the Navigation buttons and OK to
select and change:
• Shutdown: Turn off the projector
immediately.
• Timed Shutdown: Select a time option
or customize a period of time so
that the projector turns off after the
specified period.
Restore default settings
1 Press .
2 Use the Navigation buttons and OK to
select Software Update - Factory Reset.
3 Follow the on-screen instructions to start or
cancel resetting.
Notice
After resetting to the default settings,
all the files and apps you installed are
completely erased. Back up your files if
you need to reset the projector.
Clear memory storage
You can clear browsing history (such as
cookies), installation package and system
memory stored on the local storage.
1 Press .
2 Use the Navigation buttons and OK to
select Cleaner.
Check memory
You can check the total and available memory
(RAM and internal memory) of the local
storage.
1 Press .
2 Use the Navigation buttons and OK to
select About.
10 Service
Cleaning
DANGER!
Instructions for cleaning!
Before cleaning, always turn the
projector off and disconnect the power
cable.
Use a soft, lint-free cloth. Never use
liquid or easily flammable cleansers
(sprays, abrasives, polishes, alcohol,
etc.). Do not allow any moisture to
reach the interior of the projector.
Do not spray the projector with any
cleaning fluids.
Wipe over the surfaces gently. Be
careful that you do not scratch the
surfaces.
Clean the lens
Use a soft brush or lens cleaning paper for
cleaning the lens of the projector.
DANGER!
Do not use any liquid cleaning agents!
Do not use any liquid cleaning
agents for cleaning the lens, to avoid
damaging the coating film on the lens.
Clean the vents
1 In case there is much dust or lints
accumulated inside the vents of the
projector, you may remove the ventilation
grilles on two sides of the projector.
2 Use a soft cloth or brush to remove dust
and lints inside the ventilation grilles.
Service 21
3 Connect the USB flash drive to the USB 2.0
port (not the USB 3.0 port with blue) on the
projector.
4 Press , and select Software
Update - Software update - LOCAL
UPGRADE.
5 Follow the on-screen instructions to
complete the update.
3 Replace the ventilation grilles after
cleaning.
Update software
The latest software of the projector can be
found on www.philips.com/support for you
to get the best features and support from the
projector.
Before you update the software of the
projector, check the current software version:
• Press , and then select
About - System Version, UI Version and
MCU Version.
CAUTION!
Do not turn off the projector or
remove the USB flash drive during
the update.
Update software through
Internet
1 Make sure the projector is connected to
Internet. To check Internet connection,
press and go to Wi-Fi or
Ethernet Connection.
2 Press , and select Software
Update - Software update - ONLINE
UPGRADE.
• If an upgrade is available, you are
prompted to start or cancel the update.
3 Follow the on-screen instructions to
complete the update.
Update software through USB
1 Check the latest software version on www.
philips.com/support. Find your product
(model number: SCN650), and locate
‘Software and drivers’.
2 On a computer, download the software into
the USB flash drive, and rename the file
name as “update_screeneo�zip”. Save the
file in the root directory of the USB flash
drive, and do not unzip the file.
22 Philips · Screeneo S6
Problems Solutions
The projector cannot be turned on. • Disconnect and reconnect the power cable, and
try to turn the projector on again.
The projector cannot be turned off. • Press and hold longer than ten seconds. If this
does not work, disconnect the power cable.
No sound • Check that the speaker is activated (see Sound
settings on page 19)�
• Adjust the volume using the volume buttons.
No image from the external HDMI device. • Check if the correct HDMI input is selected (HDMI
1 or HDMI 2).
• Disconnect the HDMI cable or switch off the
HDMI device.
• Wait three seconds.
• Reconnect the HDMI cable or switch on the HDMI
device again.
No sound from external HDMI output
device.
• On the HDMI output device, set the audio setting
to Multichannel (Raw data) & Stereo (PCM).
No sound when you connect your
computer via HDMI cable.
• Check that the sound is activated on the
computer, and HDMI is set as the audio device.
Only the initial screen appears and not the
image from the external device.
• Check if the cables are connected to the right
sockets.
• Check that the external device is turned on.
• Check if the video output of the external device is
turned on.
• Check if the correct HDMI input is selected (HDMI
1 or HDMI 2).
Only the initial screen appears and not the
image from the connected computer.
• Try a different resolution or lower the refresh rate
setting on your computer.
The projector turns itself off. • When the projector is running for a long period of
time, the surface becomes hot.
• Check that the power cable is connected correctly.
• Check the sleep mode status in the setting menu.
When the sleep mode is activated, the device
turns off after the programmed duration
The projector cannot read the USB stick. • The projector does not support the exFAT file
system.
• Format the USB stick in FAT format, then use it.
Troubleshooting
Power cycling
If a problem occurs that cannot be corrected
with the instructions in this user manual, follow
the steps given here.
1 Turn the projector off by pressing twice
within one second.
2 Wait at least ten seconds.
3 Turn the projector on by pressing once.
4 If the problem persists, please contact our
technical service centre or your dealer.
Service 23
Problems Solutions
The projector does not react to remote
control commands.
• Check the batteries of the remote control.
• Check if the infrared sensor on the projector is
obstructed by some object.
Measures to take if Screen Mirroring does
not work anymore after a firmware update
of an Android or iOS device.
• We recommend checking regularly for new
firmware of your projector (see Update software,
page 20).
• Launch the screen mirroring app on your projector
(press on the remote control, select
and access the Mirroring option).
Screen mirroring does not work with the
available Android device.
• In order to allow screen mirroring, your device
must support Miracast. Not all Android devices
support this function. The function name can be
also known as Screencast, Screen Sharing, WiFi
Direct, Wireless Display, etc..
• Please refer to the user manual of your Android
device to check if this function is supported and
how it can be enabled.
• Install the HappyCast app on your smartphone
and follow the instructions given in the app.
When I view videos, the sound or the
picture is sometimes distorted or the sound
is not synchronized to the picture.
• The available Wi-Fi bandwidth is insufficient for
sending the video flawlessly from the smartphone
to the projector. This can happen if one or more
Wi-Fi networks operate in the same frequency
range nearby. Certain IoT devices (e.g. ZigBee
enabled devices) also operate in this frequency
range.
• Your smartphone is not fast enough to compress
the screen data and send it simultaneously over
Wi-Fi.
• Your smartphone may maintain parallel
connections to your home network and
the projector. This will reduce the available
bandwidth. Disabling temporarily the connection
to your home network may help.
The temperature of the projector’s surface
is warm.
• For this projector it is normal to generate
moderate heat during operation.
24 Philips · Screeneo S6
App store
Pre loaded apps ....................................................Ted,
Gboard, Kidoz, Blakcnut, Kodi, Netflix, VLC
and APTOIDE Store for thousand of apps
Power source
Power consumption ........operating: 60 to 150 W
...................................................power off: < 0.5 W
Power supply .....................................power adapter
Input: 100-240V~, 50/60Hz, 2.0 A (max)
Output: DC 19 V, 7.8 A
Dimension
Unpacked (W x D x H) ..................................................
228.6 x 231.8 x 140 mm / 9 x 9.13 x 5.51 inch
Weights ...................................... 3.9 kg / 8.6 pounds
Standard package includes
..................................................................... SCN650
............. Remote control with 2 AAA batteries
.........................................................Power adapter
............................ UK, US, EU, CH power cables
..................... User guide (on internal memory)
.................................................... Quick start guide
.......................................................... Warranty card
Models
.........................................SCN650 for worldwide
Apple, AirPlay and the AirPlay logo are
trademarks or registered trademarks of Apple,
Inc. in the US and other countries
Google, Android, and the Android logo are
trademarks or registered trademarks of Google,
Inc. in the US and other countries.
Manufactured under license from Dolby
Laboratories. Dolby and the corresponding
logo are trademarks of Dolby Laboratories.
11 Appendix
Technical data
Technology
Display technology ...............................................DLP
Light source ................................................RGBB LED
LED light sources. ............ last over 30,000 hours
Brightness ..........up to 2,000 Color Lumens with
DCI-P3, 125% REC.709, HDR 10 and HLG
Contrast ratio ...............................................150,000:1
Resolution .....................................3840 x 2160 pixel
Throw ratio... .............................................................1,2:1
Recommended screen size (diagonal) ..................
.................................... 25 cm-350 cm / 10”-120”
Aspect ratio .............................................16:9 and 4:3
Projection modes ..........................................................
front, rear, ceiling, ceiling rear
Focus adjustment .................................................auto
4 corners correction ............................................... yes
Keystone correction ...................................... electric
Integrated media player ....................................... yes
OS ........................................................................ Android
CPU .................................................................QuadCore
Internal memory .................................................16 GB
Noise level .......................................................< 32 dBa
Sound
Internal speaker ............................... 2x7 Watt (max)
Connection
Wi-Fi.................(802.11) a/b/g/n/ac 2.4 and 5GHz
Bluetooth ....Bluetooth 4.0, connects to external
Bluetooth speakers
Connectivity....................................Airplay, Miracast
.......................... 2x HDMI with HDCP, 1x SPDIF,
1x LAN port (RJ45, 100Mbps), 1x USB 3.0, 1x
USB 2.0 and 1 x Mini USB
Internal media player
Supported video formats......................................4K,
2K, AVC/H.264, MPEG-2, MPEG-4 (Visual
XviD), HEVC, H.263, WMV2, WMV3 (VC-1),
REALVIDEO 4, XVID, M-JPEG, V_VP8, HDR
10
Supported audio formats ..................MPEGAudio,
FLAC, AAC, AC-3, MPEG-1, AMR, COOKER,
MONKEY’S Audio, PCM (Microsoft), WMA,
ogg Vorbis
Supported photoformats. .. .jpeg/.webp/.bmp/.gif
Appendix 25
CE statement
• The product shall only be connected to a
USB interface of version USB 2.0 or higher.
• Adapter shall be installed near the
equipment and shall be easily accessible.
• The operating temperature of the EUT can’t
exceed 35°C and shouldn’t be lower than
5°C.
• The plug is considered as disconnect device
of adapter.
• The UNII Band 5150-5250 MHz is for indoor
use only.
• The device complies with RF specifications
when the device is used at 20 cm from your
body.
Hereby, Screeneo Innovation SA declares that
this product is in compliance with essential
requirements and other relevant provisions of
Directive 2014/53/EU.
The Declaration of Compliance can be
consulted on the site www.philips.com.
Frequency bands Maximum output
power
BT EDR (EIRP) 9.09 dBm
BT BLE (EIRP) 4.85 dBm
WiFi 2.4GHz (EIRP) 17.88 dBm
WiFi 5GHZ (EIRP) 17.89 dBm
FCC statement
15�19 Labeling requirements�
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
15�21 Information to the user�
Any changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
15�105 Information to user�
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
During operation, the separation distance
between the user and the antenna shall be
at least 20 cm. This separation distance will
ensure that there is sufficient distance from a
properly installed externally-mounted antenna
to satisfy the RF exposure requirements.
FCC ID: 2ASRT-SCN650
26 Philips · Screeneo S6
Other notice
Preservation of the environment as part
of a sustainable development plan is an
essential concern of Screeneo Innovation SA.
The desire of Screeneo Innovation SA is to
operate systems respecting the environment
and consequently it has decided to integrate
environmental performances in the life cycle
of these products, from manufacturing to
commissioning use and elimination.
Packaging: The presence of the logo (green
dot) means that a contribution is paid to an
approved national organisation to improve
package recovery and recycling infrastructures.
Please respect the sorting rules set up locally
for this kind of waste.
Batteries: If your product contains batteries,
they must be disposed of at an appropriate
collection point.
Product: The crossed-out waste bin symbol on
the product means that the product belongs
to the family of electrical and electronic
equipment. In this respect, the European
regulations ask you to dispose of it selectively:
• At sales points in the event of the
purchase of similar equipment.
• At the collection points made available
to you locally (drop-off centre, selective
collection, etc.).
In this way you can participate in the reuse
and upgrading of Electrical and Electronic
Equipment Waste, which can have an effect on
the environment and human health.
The paper and cardboard packaging used can
be disposed of as recyclable paper. Have the
plastic wrapping recycled or dispose of it in
the non-recyclable waste, depending on the
requirements in your country.
Trademarks: The mentioned references in
this manual are trademarks of the respective
companies. The lack of the trademarks ®
and ™ does not justify the assumption that
these dedicated terminologies are free
trademarks. Other product names used herein
are for identification purposes only and may
be trademarks of their respective owners.
Screeneo Innovation SA disclaims any and all
rights in those marks.
Neither Screeneo Innovation SA nor its affiliates
shall be liable to the purchaser of this product
or third parties for damages, losses, costs, or
expense s incurred by the purchaser or third
parties as a result of accident, misuse, or abuse
of this product or unauthorised modifications,
repairs, or alterations to this product, or failure
to strictly comply with Screeneo Innovation SA
operating and maintenance instructions.
Screeneo Innovation SA shall not be liable for
any damages or problems arising from the use
of any options or any consumable materials
other than those designated as original
Screeneo Innovation SA/PHILIPS products or
Screeneo Innovation SA/PHILIPS approved
products.
Screeneo Innovation SA shall not be held liable
for any damage resulting from electromagnetic
interference that occurs from the use of any
interface cables other than those designated as
Screeneo Innovation SA/PHILIPS products.
All rights reserved. No part of this publication
may be reproduced, stored in a retrieval
system or transmitted in any form or by any
means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior
written permission of Screeneo Innovation SA.
The information contained herein is designed
only for use with this product. Screeneo
Innovation SA. is not responsible for any use of
this information as applied to other devices.
This user manual is a document that does not
represent a contract.
Errors, printing errors and changes are reserved.
Copyright © 2019 Screeneo Innovation SA.
Screeneo Innovation SA
Route de Lully 5c - 1131 Tolochenaz - Switzerland
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used
under license. Screeneo Innovation SA is the warrantor in relation to the product with which this
booklet was packaged.
2019 © Screeneo Innovation SA. All rights reserved.
Screeneo S6
EN