Table of Contents
Philips SPN7040WA User Manual
Displayed below is the user manual for SPN7040WA by Philips which is a product in the Surge Protectors category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/support
User manual
TAPR802
SPN7040 / 7041
SPN7060 / 7061
SPN7080 / 7081
Surge Protector
1
EN
Contents
1 Important safety instructions 2
Recycling the product 2
2
Your surge protector 2
Feature highlights 2
3 Get started 3
Connect the surge protector 3
Connect the surge protector
to a TV/satellite/cable box 3
Conditions for damage claims 3
4
Limited warranty 4
Two years product limited
warranty 4
Connected equipment warranty 4
Contents
2EN
1 Important
safety
instructions
This manual contains important information
about the Philips power surge protectors.
Read it carefully before you start the
installation and setup.
Warning
•Warning
•Do not operate your surge protector near the
rain or wet areas.
•Do not operate your surge protector if liquid of
any kind is spilled onto or inside the unit.
•Do not disassemble or repair.
•Do not expose your surge protector to
direct sunlight or place it near wall heaters,
space heaters, or enclosed space prone to
temperature increase.
•The Philips surge protector requires a properly
grounded outlet for safety and to protect the
connected equipment. If you are not sure
whether your home’s electrical wiring has proper
grounding, consult a qualied electrician.
Recycling the product
Risk of electric shock or re!
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused. When
you see the crossed-out wheel bin symbol
attached to a product, it means the product
is covered by the European Directive
2012/19/EU:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
2
Your surge
protector
Congratulations on your purchase and
welcome to Philips!To fully benet from
the support that Philips oers, register your
product at www.philips.com/welcome. For
online help, go to www.philips.com/support.
Feature highlights
Your surge protection is equipped with any of
the following features. Check the availability
of these features on the package.
Protection indicator: alerts you
on the operating status of the surge
protector.
Power blocker protection: cuts o
all power to AC outlets in the event
of an electrical or power surge that
overwhelms its protection.
Surge Protection: protect connected
equipment against power surge and
voltage spike.
For models with TV coaxial protection
SPN7041, SPN7061, SPN7081
Coaxi cable protection: provides
maximum protection against surges
present on standard coaxial.
For models with USB function
SPN7060, SPN7061
Input Voltage: 250V~
Input AC frequency: 50Hz
USB C Max Output:
5.0V 3.0A 15.0W
USB A Max Output:
5.0V 4.0A 20.0W
Average active eciency (USB module): 85.0%
Eciency at low load (10 %) (USB module): 80.3%
No-load power consumption (USB module): 0.15W
3
EN
3 Get started
This surge protector is designed to guard
the connected equipment against electrical
damage. Philips oers an entire line of
surge protectors to safeguard your home
electronics and computer systems.
Connect the surge
protector
1 Plug the power cord into a properly
grounded outlet.
2 Plug the component power cord into the
surge protector.
Caution
• Do not use any extension cords, adapters,
other grounding wire or electrical connections
with your surge protector. Doing so will void all
Philips warranties.
Connect the surge
protector to a TV/
satellite/cable box
Some Philips surge protector models come
with coaxial cable surge protection. Instead
of running a connection directly from your
TV/VCR/DVD/satellite/cable box to the
wall jack, pass the connection through the
protected coaxial connections on your surge
protector.
1 Connect your incoming cable/
broadband line to the input coaxial
connector on the surge protector.
2 Connect one end of a coaxial cable to
the output coaxial connector on the
surge protector, and the other end of
to the input coaxial connector of the
device.
Coaxial cable IN Coaxial cable OUT
Set Top Box
Conditions for damage
claims
• To claim damage under the connected •
equipment warranty as a result of coaxial
line transients, ensure the equipment is
properly connected to a Philips surge
protector which oers coaxial line
protection.
• If you fail to connect the coaxial cable
protection, your connected equipment
will not be covered by the connected
equipment warranty. Most TV/VCR/
DVD/satellite/cable box damage can be
prevented if you connect coaxial cable
protection carefully and properly.
Caution
• The coaxial feature of this product could be
rendered inoperable if improperly installed.
4EN
4
Limited
warranty
Philips, Inc. (“Philips”) provides one or both
of the following warranties (Surge Protector
Limited Warranty and Connected Equipment
Limited Warranty) to the original consumer
of surge protectors sold under the Philips
brand names.Provisions applicable to each
warranty: These warranties apply only to
natural purchasers of surge protectors for
personal, family or household use, not
to commercial, institutional or industrial
purchasers. These warranties are valid only in
Europe.THESE WARRANTIES ARE IN LIEU OF
ALL OTHER EXPRESS WARRANTIES; AND
ANY IMPLIED WARRANTIES, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
A ARTICULAR PURPOSE, ARE LIMITED
TO THE DURATION OF THIS WARRANTY.
EXCEPT AS PROVIDED IN THE CONNECTED
EQUIPMENT LIMITED WARRANTY (IF
APPLICABLE), IN NO EVENT SHALL PHILIPS
BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
MULTIPLE DAMAGES* ARISING OUT OF THE
USE OF THE PHILIPS SURGE PROTECTOR.
Philips warrants that this product shall be
free from defects in material, workmanship
and assembly, under normal use, in
accordance with the specications and
warnings for the lesser of (i) two years from
the date of your purchase of this product,
or (ii) the date upon which this product has
exceeded its capacity to protect against
surges and spikes. The “Protection Working”
indicator light will no longer be lit when this
capacity is exceeded.
Two years product limited
warranty
This warranty does not cover damages
(a) as a result of an accident; (b)
resulting from the use of parts not
manufactured or sold by Philips; (c)
or resulting from modication of the
surge protector. After any repair or
modication of the surge protector by
a facility not authorized by Philips, any
problems that arise will not be remedied
under this warranty.These warranties
extend only to the original purchaser of
the product, and are not transferable. To
exercise your rights under this warranty,
you must provide proof of purchase in
the form of an original sales receipt that
shows the product name and the date
of purchase.
Connected equipment
warranty
Philips warrants to the original consumer
that it will, at its sole option, repair or replace
any equipment properly connected through
a Philips surge protector to a properly wired
AC power line with protective ground and
telephone/coax lines, which is damaged
by impulses from lightning, or other power
transients, or by momentary (less than 1ms)
voltage surges or spikes (an “Occurrence”)
if (a) the surge protector did not protect
the equipment (b) the surge protector
shows clear signs of damage; and (c) the
damage resulted from the Occurrence.
This warranty does not cover (a) damages
caused by acts of God, including ood,
erosion, or earthquake, but excluding
lightning on products with Power Blocker™
technology; (b) damages caused by a
sustained low voltage situation, or a low
voltage disturbance, including brownouts,
sags, or power outages; (c) damages
caused by war, vandalism, theft, normal use
wear-and-tear, depletion, obsolescence,
5
EN
abnormal care or uses, or abuse; (d) damage
due to non-authorized program or system
equipment modication or alteration; or (e)
damage to equipment that was not directly
connected to the surge protector at the time
of the Occurrence. This Connected Equipment
Warranty only cover during Product Warranty
period. The “Protection Working” indicator
light will no longer be lit when this capacity is
exceeded. The capacity of the surge protector
will be exceeded after an occurrence. This
warranty is limited to losses that are not
covered by a warranty from the manufacturer
of the connected equipment, or by the
consumer’s homeowners insurance or renter’s
insurance policy. Consumer agrees to rst
seek coverage under any such warranty or
policy, and not seek duplicate coverage from
Philips. Consumer agrees to provide insurance
information to Philips, at its request; and after
a claims settlement, if applicable, Philips
reserves the right to be subrogated under any
existing warranty from the manufacturer of the
connected equipment or under any existing
insurance policies the claimant may have.This
warranty is limited to surge protectors which
indicate on the packaging an accompanying
connected equipment warranty. After any
repair or modication of the surge protector
by a facility not authorized by Philips, any
problems that arise will not be remedied under
this warranty.Your Philips surge protector must
be plugged into a properly grounded outlet.
All connected equipment must be plugged
directly into your surge protector. Using any
extension cord, adapters, other grounding
wires or electrical connections in conjunction
with a Philips surge protector will void all
Philips warranties. All wires leading into the
equipment, including telephone and coaxial
lines, must pass through an appropriate Philips
surge protector.
To claim damage as a result of coaxial line
transients, equipment must be properly
connected to a Philips surge protector which
oers coaxial line protection (see the user
manual for installation instructions). If you
fail to connect the coaxial cable protection
properly, your connected equipment will not
be covered by the Connected Equipment
Warranty. The customer service department
will provide the consumer with a Return
Authorization number (RA#). Philips will
determine, at its sole discretion, whether
consumer should send the damaged
equipment and the surge protector to Philips,
or to an independent repair facility. If Philips
so requests, the consumer must, at his/her
own expense, send the damaged equipment
and the surge protector, along with a copy
of the sales receipt, to the specied location,
in secure packaging (to prevent further
damage) with the RA# clearly displayed
on the outside of the package, and with
a full written description of the problem,
including the consumer’s name, address,
and daytime phone enclosed. Philips also
reserves the right to examine the site where
the damage occurred.If Philips determines
that the Connected Equipment Limited
Warranty covers the damaged equipment,
and that the equipment was damaged
as a result of the surge protector which is
covered under the Surge Protector Limited
Warranty, Philips will either (a) authorize
repair of the connected equipment, at a cost
up to the maximum amount set forth on the
packaging of the surge protector involved;
(b) provide the consumer with an equivalent
equipment replacement; or (c) reimburse the
consumer for the present fair market value
of the damaged connected equipment. If,
applicable, the equipment will be returned
from Philips to the consumer at Philips
expense.
•
Specications are subject to change without notice.
2021 © Philips and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used under
license. This product has been manufactured by and is sold
under the responsibility of MMD Hong Kong Holding Limited
or one of its aliates, and MMD Hong Kong Holding Limited
is the warrantor in relation to this product.
Surge Basic _EN_UM_V1.0