Sharp 70" 960X User Manual
Displayed below is the user manual for 70" 960X by Sharp which is a product in the TVs category. This manual has pages.
Related Manuals
LC-80LE960X
LC-70LE960X
LC-60LE960X
LED BACKLIGHT TV
OPERATION MANUAL
LC80LE960X_EN_book.indb 1LC80LE960X_EN_book.indb 1 4/4/2014 1:07:57 PM4/4/2014 1:07:57 PM
LC80LE960X_EN_book.indb 2LC80LE960X_EN_book.indb 2 4/4/2014 1:07:58 PM4/4/2014 1:07:58 PM
1
OPERATION MANUAL ENGLISH
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free
operation of your product, please read Important safety precautions carefully before using this product.
Contents
ENGLISH
Introduction .................................................................3
Precautions For Daily Use .......................................3
Important safety precautions ...................................3
Supplied accessories ..............................................6
Optional accessories ..............................................6
Preparation .................................................................7
Protection against overturning ................................7
Attaching the stand unit – 70/60LE960X .................8
Attaching the stand unit
–
80LE960X ......................9
Connecting the TV ................................................10
Using the remote control unit ................................11
Inserting the batteries ....................................... 11
Angle of the remote control unit ........................ 11
Cautions regarding the remote control unit .......11
Part names and functions ........................................12
TV (front view) .......................................................12
TV (rear view) ........................................................12
Remote control unit ..............................................14
Quick guide ...............................................................15
Inserting the CA card into the CI module ............... 15
Recording CAM PIN setting .................................. 15
CI plus 1.3 Standard .............................................15
What is the HOME? .............................................. 16
Basic operation ................................................ 16
Initial auto installation ............................................ 18
Checking signal strength and channel strength
(DTV only) ........................................................... 18
Watching TV ..............................................................19
Daily operation ......................................................19
Turning on/off the power – using the control
panel of the TV ............................................... 19
Turning on/off the power – using the remote
control unit .....................................................19
Watching TV (DTV only) ....................................20
CH list ..............................................................20
Programme information (DTV only) ...................20
Selecting an external video source ...................20
Switching the digital audio format (DTV only) ....21
Switching the analogue audio format ................ 21
Favourite Channel Information ...............................22
Operator profile ..................................................... 22
Teletext .................................................................23
EPG (DTV only) ..................................................... 25
Useful settings for using EPG ...........................25
Selecting a programme using EPG (DTV only) ..26
Timer setup using EPG ....................................28
Cancelling the timer setup ................................28
Connecting external devices ................................... 29
Video connections ................................................30
HDMI connection .............................................30
Component connection ....................................31
VIDEO connection ............................................ 31
Audio connections ................................................32
Speaker/amplifier connection ...........................32
AQUOS LINK .............................................................33
Controlling HDMI devices using AQUOS LINK.......33
AQUOS LINK connection ......................................34
Regarding “Select recording device” .....................34
Operating an AQUOS LINK device ........................ 35
Using a Smartphone with the TV ........................... 36
Basic adjustment ......................................................38
Picture settings ..................................................... 38
Audio settings ....................................................... 40
Power save settings .............................................. 42
Channel settings ...................................................43
Digital setting (DTV only) ................................... 43
Analogue setting .............................................. 44
Sort ..................................................................45
Erase programme ............................................45
Useful viewing functions ..........................................45
TV Start-up time setting ........................................45
Individual setting – Password ................................46
Individual setting – Time ........................................ 47
Individual setting – Language ................................ 47
Optional features settings ..................................... 48
Selecting the picture size manually ...................48
Selecting the picture size automatically.............48
Setting audio input ...........................................49
Skipping specified inputs .................................. 49
Selecting the HDMI picture size automatically ... 50
Adjusting image position .................................. 51
Additional features ................................................ 51
Bluetooth setup ....................................................53
Miracast setup ...................................................... 54
Network function ...................................................... 55
Playing Back Files from a Portable Device or PC ...55
Easy share setting ............................................55
Device name setting ............................................. 55
Connecting to the network ....................................55
Wired installation .............................................. 55
Wireless installation ..........................................56
Specifications (Wireless LAN) ................................ 58
Specifications (Bluetooth) ...................................... 58
Using AQUOS.NET ...............................................59
Clear browser setting ............................................ 60
About links ............................................................ 60
Other useful features ............................................... 62
USB-recording ......................................................62
Connecting a USB HDD ...................................62
USB HDD registration .......................................62
How to operate USB-recording ............................. 63
USB-recording .................................................64
USB-recording timer setting .............................64
Timer list ..........................................................64
USB-recording playback .................................. 64
Time shift playback ..........................................65
Multimedia/Home network .................................... 66
Photo mode .....................................................67
3D mode ..........................................................67
LC80LE960X_EN_book.indb 1LC80LE960X_EN_book.indb 1 4/4/2014 1:07:58 PM4/4/2014 1:07:58 PM
2
Music mode ..................................................... 68
Video mode......................................................69
USB device/SD memory card compatibility ........... 70
Home network server compatibility .......................70
Connecting a PC ....................................................... 71
Connecting a PC ..................................................71
Displaying a PC image on the screen .................... 71
Selecting the picture size .................................. 71
Adjusting the PC image automatically ............... 72
Adjusting the PC image manually .....................72
PC control of the TV ............................................. 73
Command list ...................................................74
Enjoying 3D image viewing......................................75
Before using the 3D glasses ................................. 75
Preparing for the 3D glasses .................................76
Part Names ...................................................... 76
Using the 3D glasses ............................................77
Before using the 3D Glasses ............................77
Attaching the Nose Pad ................................... 77
Using the 3D glasses........................................77
Usage Range of the 3D Glasses .......................77
Replacing the Battery .......................................78
Cautions for 3D image viewing .............................. 79
Display format for 3D and 2D images ................... 79
Viewing 3D images ............................................... 80
Receiving a 3D image signal that can be
detected automatically ...................................80
Switching 3D to 2D mode ................................ 80
Receiving a 3D image signal that cannot be
detected automatically ...................................80
Watching 2D images in 3D ............................... 81
Switching to the previous mode ....................... 81
3D Menu ..........................................................81
Configuring the TV settings to enhance 3D image
viewing ...............................................................81
3D picture adjustments .................................... 81
3D setup .......................................................... 82
Specifications — 3D glasses ................................. 83
Troubleshooting — 3D Images ..............................84
Appendix ...................................................................85
Troubleshooting ....................................................85
Troubleshooting — Digital broadcasting ................ 85
Reset .................................................................... 86
Updating your TV via DVB-T (DTV only) ................. 86
Getting information ...............................................87
Updating your TV via USB/Network ......................87
Information on the software licence for this
product ..............................................................88
Software licence ...............................................88
Specifications .......................................................90
Removing the stand ..............................................91
Mounting the TV on a wall .....................................92
Dimensional drawings ........................................... 94
CLEARING THE PASSWORD ............................... 96
This product qualifies for ENERGY STAR when “HOME”
is selected for “TV Location”.
Setting “TV Location” to “HOME” allows the TV to
achieve an energy-saving status for household use.
NOTE
• The illustration and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the
actual operation.
• The illustrations used throughout this operation manual are based on LC-80LE960X.
LC80LE960X_EN_book.indb 2LC80LE960X_EN_book.indb 2 4/4/2014 1:07:58 PM4/4/2014 1:07:58 PM
3
Precautions For Daily Use
Observe the following items
Maintenance of the cabinet
• When cleaning the cabinet, use a soft cloth (made of cotton, floss, etc.) to clean gently.
• Do not use a dry or damp rag mixed with chemicals, as this could cause the ingredients of the cabinet body to deteriorate or
crack.
• Be careful not to use an abrasive cloth for cleaning or clean with excessive force, as this could scratch the surface of the
cabinet.
• If the cabinet is greatly soiled, clean with a soft cloth (made of cotton, floss, etc.) soaked with a small amount of diluted neutral
detergent and wrung out, and then clean with a soft dry cloth.
• Solvents such as benzene or thinner could cause the cabinet to deteriorate, or make its coating come off. Therefore do not use
such solvents to clean the cabinet.
• Because plasticizer is included in the plastics, deterioration or the coating peeling off could occur when the cabinet comes into
contact with some substances. Therefore keep it away from volatile substances such as insecticide. In addition, do not let it
come into contact with objects made of rubber, resin, etc. for a long time.
Maintenance of the LCD panel
• Before cleaning the LCD panel, be sure to turn off the TV set and unplug the power cord from the outlet.
• When cleaning the LCD panel, use a dry and soft cloth (made of cotton, floss, etc.) to clean the surface of the LCD panel gently.
For protecting the LCD panel, do not clean with a dirty cloth, detergent, or a dry or damp rag mixed with chemicals, as this
could cause peeling of the panel surface.
• Be careful not to clean with an abrasive cloth or with excessive force, as this could cause the panel surface to be scratched.
• If the LCD panel is greatly soiled, clean it gently with a soft cloth (made of cotton, floss, etc.) soaked with a small amount of
water (Do not clean with excessive force, so as to avoid the scratch of the panel surface).
• If dust sticks on the surface of the LCD panel, clean the panel with a commercially available cleaning brush (anti-static brush).
Important safety precautions
Caring for the cabinet
• Use a soft cloth (cotton, flannel, etc.) and gently wipe the
surface of the cabinet.
• Using a chemical cloth (wet/dry sheet type cloth, etc.) may
deform the components of the main unit cabinet or cause
cracking.
•Wiping with a hard cloth or using strong force may scratch
the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth (cotton,
flannel, etc.) soaked in neutral detergent diluted with water
and thoroughly wrung out, and then wipe with a soft dry
cloth.
• The cabinet is primarily made of plastic. Avoid using
benzene, thinner, and other solvents, as these may deform
the cabinet and cause the paint to peel off.
• Do not apply insecticides or other volatile liquids.
• Also, do not allow the cabinet to remain in contact
with rubber or vinyl products for a long period of time.
Plasticizers inside the plastic may cause the cabinet to
deform and cause the paint to peel off.
• When relocating the product
placed on a cart, it must be moved
with utmost care. Sudden stops,
excessive force and uneven floor
surface can cause the product to fall
from the cart.
Caring for the front panel
• Turn off the main power and unplug
the AC cord from the wall outlet
before handling.
• Gently wipe the surface of the front
panel with a soft cloth (cotton,
flannel, etc.).
• To protect the front panel, do not
use a dirty cloth, liquid cleaners, or
a chemical cloth (wet/dry sheet type
cloth, etc.). This may damage the
surface of the front panel.
• Wiping with a hard cloth or using
strong force may scratch the surface
of the front panel.
• Use a soft damp cloth to gently wipe
the front panel when it is really dirty
(It may scratch the surface of the
front panel when wiped strongly).
• If the front panel is dusty, use
an anti-static brush, which is
commercially available, to clean it.
• Water and moisture — Do not use
the product near water, such as
bathtub, washbasin, kitchen sink,
laundry tub, swimming pool and in a
wet basement.
Introduction
LC80LE960X_EN_book.indb 3LC80LE960X_EN_book.indb 3 4/4/2014 1:07:58 PM4/4/2014 1:07:58 PM
4
Introduction
• Do not place vases or any other
water-filled containers on this
product.
The water may spill onto the product
causing fire or electric shock.
• Stand — Do not place the product
on an unstable cart, stand, tripod
or table. Doing so can cause the
product to fall, resulting in serious
personal injuries as well as damage
to the product. Use only a cart,
stand, tripod, bracket or table
recommended by the manufacturer
or sold with the product. When
mounting the product on a wall, be
sure to follow the manufacturer’s
instructions. Use only the mounting
hardware recommended by the
manufacturer.
• Ventilation — The vents and other
openings in the cabinet are designed
for ventilation. Do not cover or block
these vents and openings since
insufficient ventilation can cause
overheating and/or shorten the life
of the product. Do not place the
product on a bed, sofa, rug or other
similar surface, since they can block
ventilation openings. This product is
not designed for built-in installation;
do not place the product in an
enclosed place such as a bookcase
or rack, unless proper ventilation
is provided or the manufacturer’s
instructions are followed.
• In case the product is dropped and
the cabinet is damaged, be sure to
turn off the power of the product,
and unplug the power cord. If you
continue to use the product, it may
cause fire or electric shock. Contact
your dealer.
• Do not open the rear cover of the
cabinet to reconstruct the circuits.
There exists high voltage within the
cabinet and it may cause electric
shock and injury. If maintenance is
required, contact your dealer.
• The LCD panel used in this product
is made of glass. Therefore, it can
break when the product is struck
forcefully or with a sharp object. If
the LCD panel is broken, be careful
not to be injured by broken glass.
• Heat sources — Keep the product
away from heat sources such as
radiators, heaters, stoves and other
heat-generating products (including
amplifiers).
• To prevent fire, never place any type
of candle or naked flames on the top
or near the TV set.
• To prevent fire or shock hazard, do
not place the AC power cord under
the TV set or other heavy items.
• Do not place heavy objects on
this product or stand on it.
Doing so could cause injury if the
product overturns. Take special
care near children and pets.
• Unplug the power cord before you
move the TV set. If not unplugged
beforehand, the power cord may
become damaged and cause
electric shock.
The LCD panel is a very high technology product with
2,073,600 pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally a few
non-active pixels may appear on the screen as a fixed point
of blue, green, red or yellow.
This is within product specifications and does not constitute
a fault.
Precautions when transporting the TV
• When transporting the TV, never
carry it by holding or otherwise
putting pressure onto the display.
Be sure to always carry the TV by
two or more people (80 inch: three
or more people) holding it with two
hands — one hand on each side of
the TV.
If a television is not positioned in a sufficiently stable location,
it can be potentially hazardous due to falling.
Many injuries, particularly to children, can be avoided by
taking simple precautions such as:
• Using cabinets or stands recommended by the
manufacturer of the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the
supporting furniture.
• Not placing the television on tall furniture (for example,
cupboards or bookcases) without anchoring both the
furniture and the television to a suitable support.
• Not standing the televisions on cloth or other materials
placed between the television and supporting furniture.
• Educating children about the dangers of climbing on
furniture to reach the television or its controls.
• Do not display a still picture for a long time, as this could
cause an afterimage to remain.
• Install the product on the place where the AC cord can
be unplugged easily from the AC outlet, or from the AC
INPUT terminal on the rear of the product.
NOTE
• The above are pictures for reference only; the actual item
might be different.
LC80LE960X_EN_book.indb 4LC80LE960X_EN_book.indb 4 4/4/2014 1:07:58 PM4/4/2014 1:07:58 PM
5
Introduction
3D Glasses
Prevention of accidental ingestion
• Keep the accessory out of the reach of small children. Small children can accidentally swallow these parts.
– If a child accidentally swallows any of these parts, seek immediate medical attention.
Do not disassemble
• Do not disassemble or modify the 3D Glasses except when recycling the batteries. Do not modify the 3D Glasses.
Caution for lithium battery
• Do not expose the 3D Glasses to excessive heat, such as direct sunlight, fire or in an area with high humidity.
• Replace only with the same or equivalent type of battery. The battery may explode if improperly replaced.
• Take care not to reverse the battery poles (+ and -) when loading the battery. Loading the battery incorrectly may damage the
battery of cause it to leak battery fluid, which could result in a fire, injury or damage.
Handling the 3D Glasses
• Do not drop, exert pressure on, or step on the 3D Glasses. Doing so may damage the glass section, which may result in the
risk of injury.
• Be careful not to trap your finger in the hinge section of the 3D Glasses. Doing so may result in injury.
– Pay special attention when children are using this product.
Using the 3D Glasses
• Use of the 3D Glasses should be limited to a maximum of 3 hours, and in any case no more than one movie.
• Use only the 3D Glasses recommended for this TV.
• Use the 3D Glasses only for the specified purpose.
• Do not move around while wearing the 3D Glasses. The surrounding area may appear dark, which may result in falling or other
accidents that may cause injury.
Viewing 3D images
• If you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes.
• Do not use the 3D Glasses if they are cracked or broken.
LC80LE960X_EN_book.indb 5LC80LE960X_EN_book.indb 5 4/4/2014 1:07:59 PM4/4/2014 1:07:59 PM
6
Supplied accessories
Introduction
Remote control unit ( x 1) “AAA” size battery ( x 2) AV cable ( x 1)
Pages 11 and 14 Page 11 Page 31
Optional accessories
Some of the listed optional accessories may not be available depending on the region.
Please check with your nearest Sharp Authorised Dealer for current optional accessories as we may add more optional
accessories from time to time.
Part name Part number
3D glasses
AN-3DG20-B
AN-3DG30
AC cord ( x 1) Cable tie ( x 1) Operation manual
LC-80LE960X only
Stand unit 3D glasses ( x 2)
LC-70/60LE960X LC-80LE960X
Page 8 Page 9
LC80LE960X_EN_book.indb 6LC80LE960X_EN_book.indb 6 4/4/2014 1:07:59 PM4/4/2014 1:07:59 PM
7
Protection against overturning
There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip-
resistant measurement for your safety.
Anchoring the TV to the wall or a pillar
1Affix the TV to the wall or a pillar using
extra strong ties and cup hooks. View from the top
no
Wall
Cup hook (commercially available)
Tie (commercially available)
Fixing the TV to the table
1Place the TV on the table.
2Pull the attached restraining bracket out so that it
is at a 90 degrees angle.
3Insert commercially available screw in the hole of
the restraining bracket and tighten the screw to
secure the TV to the table.
• Use commercially available screw to firmly secure the TV.
CAUTION
• As this product is heavy, use a table that is wide
enough to support the product and capable of
withstanding the product’s weight. The table should be
set where it will not be overturned.
• Be sure to use at least two people when moving the TV.
Stand
Screw
(commercially
available)
Preparation
Restraining bracket
LC80LE960X_EN_book.indb 7LC80LE960X_EN_book.indb 7 4/4/2014 1:07:59 PM4/4/2014 1:07:59 PM
8
Attaching the stand unit – 70/60LE960X
• Before attaching (or detaching) the stand, unplug the AC
cord.
• Before performing work, spread cushioning over the surface
on which you will be laying the TV. This will prevent it from
being damaged.
• Be sure that two or more persons attach the stand.
CAUTION
• Attach the stand in the correct direction.
•
Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
•
After attaching the stand to the TV, do not hold the stand
when you put up, set up, move or lay down the TV.
•
Do not remove the stand from the TV unless using a wall
mount bracket to mount it.
1Confirm that there are 14 screws (twelve M5
screws and two M4 screws) supplied with the
stand unit.
2Attach the supporting post to the stand base.
1Insert the claws of the supporting post into the stand
base.
2Secure the post and the base using the M5 screws
(length: 60"/70" (14 mm)) and a screwdriver.
M5 screws
NOTE
• Tighten the screws to the holes of the mark “B”.
3Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
• Make sure that the stand is firmly inserted into the TV.
Improper installation may result in tilting of the TV set.
•
Instead of using a soft cushion, the cardboard box
that the TV is packed in can be assembled and used
as a work table (refer to the instructions on the box to
assemble the work table).
Soft cushion
4Insert and tighten the M5 screws (length: 14 mm)
into the holes on the rear of the TV.
M5 screws
5Attaching the stand cover.
1Insert the stand cover.
2Insert and tighten the M4 screws (length: 8 mm) into
the holes of the stand cover.
• Tighten the screws by pressing the bottom of the
stand base to the TV side.
M4 screws
Preparation
LC80LE960X_EN_book.indb 8LC80LE960X_EN_book.indb 8 4/4/2014 1:08:00 PM4/4/2014 1:08:00 PM
9
Attaching the stand unit
–
80LE960X
•
Before attaching (or detaching) the stand, unplug the AC cord.
•
Before performing work, spread cushioning over the surface
on which you will be laying the TV. This will prevent it from
being damaged.
•
Be sure that two or more persons attach the stand.
CAUTION
•
Attach the stand in the correct direction.
•
Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
•
After attaching the stand to the TV, do not hold the
stand when you put up, set up, move or lay down the TV.
•
Do not remove the stand from the TV unless using a wall
mount bracket to mount it.
1Confirm that there are 14 screws (eight M6
screws, four M5 screws and two M4 screws)
supplied with the stand unit.
2Attach the supporting post to the stand base.
1
Insert the claws of the supporting post into the stand base.
2
Secure the post and the base using the M6 screws (length:
20 mm) and a screwdriver.
M6 screws
NOTE
• Tighten the screws to the holes of the mark “B”.
3Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
•
Make sure that the stand is firmly inserted into the TV.
Improper installation may result in tilting of the TV set.
•
Instead of using a soft cushion, the cardboard box
that the TV is packed in can be assembled and used
as a work table (refer to the instructions on the box to
assemble the work table).
Soft cushion
4Insert and tighten the M5 screws (length: 14 mm)
into the holes on the rear of the TV.
M5 screws
5Attaching the stand cover.
1Insert the stand cover.
2Insert and tighten the M4 screws (length: 8 mm) into
the holes of the stand cover.
• Tighten the screws by pressing the bottom of the
stand base to the TV side.
M4 screws
NOTE
• To detach the stand unit, perform the steps in reverse order.
• A screwdriver is not supplied with this product.
• In the installation procedure, be careful not to catch your
fingers between the TV set and the floor.
Preparation
LC80LE960X_EN_book.indb 9LC80LE960X_EN_book.indb 9 4/4/2014 1:08:01 PM4/4/2014 1:08:01 PM
10
Preparation
Connecting the TV
Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated
location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC
cord.
LC-80LE960X only
p
n
o*
Plug the standard DIN45325 plug (IEC 169-2)
75-ohm coaxial cable.
Insert a CA card into the CI slot to watch scrambled
broadcasts (Page 15).
Plug the AC cord in to the AC outlet (product shape
varies in some countries).
NOTE
* This function applicable for certain countries only.
• The cable tie can be moved from to .
• Place the TV close to the AC outlet, and keep the power plug
within reach.
• Disconnect the AC cord from the AC outlet if the TV will not
be used for a long period of time.
LC80LE960X_EN_book.indb 10LC80LE960X_EN_book.indb 10 4/4/2014 1:08:01 PM4/4/2014 1:08:01 PM
11
Using the remote control unit
Inserting the batteries
Before using the TV for the first time, insert two supplied “AAA” size batteries. When the batteries become depleted
and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
1Open the battery cover. 2Insert the two supplied “AAA”
size batteries.
3Close the battery cover.
• Place batteries with their terminals
corresponding to the (e) and (f)
indications in the battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in
old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical
leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Angle of the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit
and sensor may prevent proper operation.
30° 5 m
30°
30°
30°
Remote control sensor
* When mounting the TV on the wall.
Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. In addition, do not soak the remote
control unit to liquids, and do not place in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight. The heat may cause
deformation of the unit.
• The remote control unit may not work properly if the remote control sensor of the TV is
under direct sunlight or strong lighting. In such cases, change the angle of the lighting or
the TV, or operate the remote control unit closer to the remote control sensor.
Preparation
LC80LE960X_EN_book.indb 11LC80LE960X_EN_book.indb 11 4/4/2014 1:08:02 PM4/4/2014 1:08:02 PM
12
TV (front view)
POWER
MENU
INPUT
VOL + /−
CH
POWER
REC
TIMER
3D infrared emitter*1
Remote control
sensor
OPC
sensor*2
POWER
indicator
TIMER
indicator
REC
indicator
*1 This panel emits infrared signal towards the 3D glasses you wear when viewing 3D images. Do not place anything between the 3D infrared emitter on
the TV and the infrared receiver on the 3D glasses. Refer to page 79 for details.
*2 OPC: Optical Picture Control (Page 39)
TV (rear view)
RS-232C terminal
INPUT 6 (COMPONENT/AUDIO (L/R)/VIDEO)
terminal
PC terminal
7
INPUT 6
6
COMPONENT
Part names and functions
LC80LE960X_EN_book.indb 12LC80LE960X_EN_book.indb 12 4/4/2014 1:08:02 PM4/4/2014 1:08:02 PM
13
TV (rear view) — continued
C.I.
SD/
SDHC
USB 1
AUDIO(L/R)
(DC 5V 900mA)
ARC
OUTPUT
DIGITAL
AUDIO
OUTPUT
USB 2
AUDIO IN
(HDMI 2/PC)
AV IN
AUDIO (L/R)
INPUT 5
5
SD/SDHC card slot
OUTPUT
(Headphones/ AUDIO
(L/R)) terminal*1
USB 1 port
HDMI 3 (HDMI/ARC)
terminal (INPUT 3)
HDMI 2 (HDMI)
terminal (INPUT 2)
HDMI 1 (HDMI)
terminal (INPUT 1)*4
HDMI 4 (HDMI/MHL)
terminal (INPUT 4)
C.I.
(COMMON INTERFACE)
slot*3
AUDIO IN (HDMI 2/PC)
jack*2
Antenna terminal
USB 3 (HDD) port
ETHERNET
(10/100) terminal
USB 2 port
DIGITAL AUDIO
OUTPUT terminal
INPUT 5 (AV IN)
AUDIO (L/R) terminal
*1 Refer to page 50 for details.
*2 The HDMI 2 and PC terminals can both use the same audio input terminal (AUDIO IN (HDMI 2/PC)). However, the proper item must be selected in the
“Audio select” menu (refer to page 49 for details).
*3 This function applicable for certain countries only.
*4 HDCP 2.2 copy protected signal can be viewed via HDMI 1 only.
WARNING
• Excessive sound pressure from earphones and headphones can cause hearing loss.
• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
Part names and functions
LC80LE960X_EN_book.indb 13LC80LE960X_EN_book.indb 13 4/4/2014 1:08:02 PM4/4/2014 1:08:02 PM
14
Part names and functions
Remote control unit
EXT MEDIA
TV INFO
MENU
GUIDE
SLEEP
5
6
15
16
2
11
12
8
9
10
7
1
27
28
13
4
17
*
18
14 25
26
22
23
20
19
21
24
3
1 < (Standby/On)
To switch the power on and off (Page 19).
2 EXT MEDIA buttons
AQUOS LINK
If external equipment such as a AQUOS BD player
is connected via HDMI cables and is AQUOS LINK
compatible, you can use these EXT MEDIA buttons. See
pages 33 and 36 for details.
USB-recording
Record a programme you are watching. (Pages 62–66).
3 >
Press to access analogue and digital TV mode.
4 INFO
DTV : Display the programme information (Page 20).
ATV : Display the channel information.
5 0–9*
Set the channel (Page 19).
6 A (Flashback)*
Press to return to the previously selected channel or
external input.
7 HOME
Display the “HOME” screen to enjoy Internet connection
and Home network function and to perform settings for the
TV (Page 16).
8 3D
Select between 3D and 2D image viewing (Pages 75–84).
9 a/b/c/d (Cursor)
Select a desired item on the setting screen.
? (ENTER)
Execute a command.
10 B
Turn off the On-Screen Display (Page 16).
11 e (Mute)
Mute the sound.
12 Y+/–
Set the volume.
13 MPX
Select a sound multiplex mode (Page 21).
14 WIDE
Change a wide image mode (Pages 48, 69, 70 and 71).
15 CONTROL
Press to display the panel to operate some functions on the
screen.
16 FREEZE/3 (Hold)
Freeze a motion picture on the screen.
Teletext mode : Stop updating teletext pages automatically.
Press 3 again to release the hold mode (Page 23).
17 m (Teletext)
Select the teletext mode (All TV image, all text image and
TV/text image) (Page 23).
18 [ (Subtitle)
Switch subtitle languages on/off (Page 23).
19 b (INPUT SOURCE)*
Select an input source (Pages 20, 30, 49, 50, 53, 54, 71 and
72).
20 @/k (Reveal hidden teletext)
Displays the menu screen (Page 16).
Teletext mode: Display hidden characters (Page 23).
21 C/v (Top/Bottom/Full)
Menu mode : Return to the previous menu screen (Page 16).
Teletext mode : Set the area of magnification (Page 23).
22 GUIDE/1 (Subpage)
DTV : To display EPG (Electronic Programme Guide) screen
(Pages 25–28).
ATV : Display the channel list.
Teletext mode : Display the teletext subpage directly
(Page 23).
23 CHr/s
TV input mode : Select the channel (Page 19).
AQUOS.NET : Select the page (Page 59).
24 R/G/Y/B (Colour) buttons
The coloured buttons are correspondingly used to select
the coloured items on the screen (e.g., AQUOS LINK,
Multimedia, Home network, teletext).
25 DISPLAY
Display the channel or input information.
Reveal/hide the guide display for Multimedia mode (Pages
67–69).
26 #
Select audio/video settings (Page 38).
27 ECO
Select “Energy save” setting (Page 42).
28 SLEEP
Set the sleep timer.
NOTE
* “0 − 9”, “A”, “b” are used by string input like a mobile
phone.
LC80LE960X_EN_book.indb 14LC80LE960X_EN_book.indb 14 4/4/2014 1:08:02 PM4/4/2014 1:08:02 PM
15
Quick guide
Inserting the CA card into the CI
module
In order to receive coded digital stations, a common
interface module (CI module) and a CA card must be
inserted in the CI slot of the TV.
1Carefully insert the CI module in the CI slot with
the contact side forward.
2The logo on the CI module must be facing outward
from the rear of the TV.
EChecking CI module information
Go to “HOME” > “TV Menu” > “Setup” >
“Option” > “CI setting” > “CI menu”.
• This menu is only available for digital stations.
• The content of this menu depends on the provider of the
CI module.
Module
General information on CI module displays.
Menu
Adjustment parameters of each CA card displays.
Enquiry
You can input numerical values such as passwords here.
NOTE
• It takes a few minutes to certify the licence key when you
insert a CA card into the CI+ compatible CI module for the
first time. This process may fail when there is no antenna
input or you have never run “Auto installation”.
• The CI+ compatible CI module sometimes upgrades its
firmware. You may not receive any TV images before
upgrading. You can only use the POWER during upgrading.
• Copy protected content may not be output or may be output
with a copy control signal. The protect icon* is displayed
when INFO is pressed while watching copy protected
contents.
*Protect icon: X
• If the TV displays an update confirmation message for the CA
card while receiving CI+ compatible broadcasts, follow the
screen prompts.
• Make sure that the CI module is properly inserted.
• If the old CAM is used, authentication may fail. In such cases,
contact the contracted service provider.
Recording CAM PIN setting
When a CAM PIN code is required for recording a
programme, it is necessary to enter the CAM PIN code
in advance.
1Go to “HOME” > “TV Menu” > “Setup” >
“Option” > “CI setting” > “Recording CAM PIN
setting”.
2Enter the CAM PIN code.
NOTE
• If a PIN code is not entered or is entered incorrectly, the
programme will not be able to be recorded/played back.
• Because recording is not possible when channel lock (page
45) and parental rating (page 46) settings are active, it is
necessary to deactivate both of these settings.
CI plus 1.3 Standard
CI Plus is an advanced development of the DVB
Common Interface Standard.
1Regarding security
There are some regulations in recording functions.
The playback of encrypted programmes is strongly
dependent on which CA module is used. The playback
of encrypted recordings may sometimes not be possible,
or only during limited time. Programme providers, who
use the CI Plus standard, can assign different rights for
their broadcast programmes.
Exercise caution when using USB-recording to record
broadcast programmes (Pages 52–66).
2Operator service list management (Operator
profile)
Under the 1.3 specification the CAM may provide the
channel listing parameters (channel number, frequency
etc.) and these can be updated while in use.
Refer to “Operator profile” on page 22.
LC80LE960X_EN_book.indb 15LC80LE960X_EN_book.indb 15 4/4/2014 1:08:02 PM4/4/2014 1:08:02 PM
16
What is the HOME?
You can easily launch to enjoy Internet connection and Home network function and to perform settings for the TV from
this “HOME” screen.
By connecting the TV to the internet you can enjoy a variety of broadband content.
Internet browsing on a TV behaves differently to a PC (Personal Computer). PC’s have greater web browsing
capabilities and memory plus support a wider range of functionalities and add ons – some PC viewing capability may
not be possible on a TV. In such cases an application may close or an exclamation mark (“!”) or an error message may
be displayed.
To maximise the performance of YouTube content it is highly recommended that the user can access the content via
the dedicated YouTube application on this TV.
Sharp recommends that from time to time you update your TV’s software via the internet or by downloading updates
onto a USB. Go to www.sharp.net.au and click on Customer Support, then follow the appropriate links.
Basic operation
Display/exit the HOME screen
Press HOME and the “HOME” screen
displays. The operation will exit the
“HOME” screen if you press HOME before
it is completed.
MENU
MENU
Select an item
Selecting in the HOME.
Press a/b/c/d to select the desired service or menu, and then press ?.
1 AQUOS.NET
By connecting the TV to the Internet (Page 59).
2 Multimedia (Page 66)
3 Home network (Page 66)
Record list (Page 64)
CH list (Page 20)
4 Input change
5 YouTubeTM
You can enjoy YouTube on your AQUOS.
6 TV Menu
Call up the OSD (On-screen Display) to perform settings
for the TV. The OSD (On-screen Display) for the settings
is called “TV Menu”. The “TV Menu” enables various
settings and adjustments.
NOTE:
You can call up “TV Menu” screen by press
@.
MENU
Network
Setup
Skype
TM
Home netwo
AQUOS.NET
Multimedia
1/7
Menu status
Select recording device
Quick start
No signal off
No operation off
Sleep timer
[USB-HDD]
[Off]
[Disable]
[Disable]
[Off]
: LAN/Storage status : Menu status
: Enter : End
1
2
3
8
11
4
6
9 10
7
5
put change
put change
7 Network setup (Pages 55 – 57)
8 IP Control (Page 73)
9 Display or Exit “LAN/Storage status”
10 Display or Exit “Menu status”
11 “LAN/Storage” or “Menu” status
Regarding the instruction on the manual
On this manual, the following expression is often used in order to simplify instructions.
• Go to “HOME” > “TV Menu” > “Setup” > ...
This indicates how to navigate through the HOME screen using a/b/c/d and ? buttons.
Quick guide
LC80LE960X_EN_book.indb 16LC80LE960X_EN_book.indb 16 4/4/2014 1:08:03 PM4/4/2014 1:08:03 PM
17
Quick guide
Using software keyboard
Use the software keyboard when you need to input text.
Char.Set
Caps
Cancel
Done
Delete
Clear
Cursor Left Caps Char.Set Cursor Right
1 Char. Set
Changes character set into the
alphabet, numbers, symbols, etc.
2 Caps
Changes characters to capital/lower
case.
3 Done
Confirm the entry.
4 Cancel
Abort input and close the software
keyboard.
5 R/G/Y/B (Colour) buttons
Selects the coloured items on the
screen.
6 Input cursor
Press c/d to move the cursor when
highlighted.
7 Input field
The text you enter is displayed as you
type it in.
8 Character
Input characters by using these
buttons.
9 ?
Put a line break.
10 Clear
Erases the character string.
• When the cursor is somewhere in a
line: the character string to the right
of the cursor will be erased.
• When the cursor is at the right
end of a line: the entire line will be
erased.
11 Delete
If the cursor is at the right end of a
line, this erases text one character at
a time.
• You can also delete text by
pressing C on the remote
control unit.
NOTE
• Depend on application, there might has a different software keyboard with above indication.
Using software keyboard (Web browser)
hello
43556 Hello Aiello Helen
Language : English
: EXIT: Enter: Select
Input Method : XT9
Move keyboard display
Cello Gallo Gekk
EXITENTER
1
.?!,-'@:/
2
abc
3
def
4
ghi
5
jkl
6
mno
7
pqrs
[ ab ]
8
0
tuv
9
wxyz
RETURN
x
b
1 Input field
The text you enter is displayed as you type it in.
2 Input candidate
While you are entering text, likely input conversion
candidates are displayed based on what you typed in.
• You can also enter text by pressing a/b/c/d on
the remote control unit.
3 0 – 9 keys
Input characters by using these buttons.
4 Shift key
Changes characters to capital/lower case by pressing
on the remote control unit.
EXAMPLE
AB Ab ab
5 (space)
You can input a space by pressing b on the remote
control unit.
6 Back space key
Erases the character string by pressing C on the
remote control unit.
7 Key guidance
• Select the coloured item on the screen.
R : Language selection
G : Changes character set into the alphabet, numbers,
symbol, etc.
Y : Changes the display position of the software
keyboard.
NOTE
• If input method select to “XT9”, a word can be inputted by few numbers with push a button.
For example input hello
XT9 : 43556
ABC : 4433555 I 555666
LC80LE960X_EN_book.indb 17LC80LE960X_EN_book.indb 17 4/4/2014 1:08:03 PM4/4/2014 1:08:03 PM
18
Initial auto installation
W
hen the TV is powered on for the first time after purchase,
the initial auto installation wizard appears. Follow the menus
and make the necessary settings one after another.
Confirm the following before turning on the
power
EIs the antenna cable connected?
EIs the AC cord plugged in?
1Press < on the TV.
• The initial auto installation wizard appears.
2Setting the OSD language.
Press a/b/c/d to select the desired language, and then
press ?.
3Selecting the location of the TV.
Press c/d to select where you will use this TV, and then
press ?.
HOME:
• Settings are optimised for normal home viewing and
energy efficiency.
• “STANDARD” will be the default value for the “AV mode”
setting.
STORE:
• Settings are designed for maximum impact in retail store
displays.
• “DYNAMIC (Fixed)” will be the default value for the “AV
mode” setting. If the “AV mode” is changed, the TV will
automatically switch back to “DYNAMIC (Fixed)” when
there is no operation using the TV or remote control unit
for 30 minutes.
• The confirmation screen pops up only when selecting
“STORE”. Press c/d to select “Yes” or “No”.
* This product qualifies for ENERGY STAR in “HOME” mode
default setting.
* ENERGY STAR qualification is based on “STANDARD” in the “AV
mode” menu.
NOTE
• STORE: A demonstration image will be displayed after initial
auto installation is completed. If you have chosen “STORE”
by mistake, go to “Setup” > “View setting” > “Reset” > select
“HOME” again.
4Setting the country.
Press a/b/c/d to select your country or area, and then
press ?.
• This setting screen only appears during the initial auto
installation.
NOTE
• DTV concerned menu may not displayed in some
country.
5Press c/d to select “Digital Search” or “Analogue
Search”, and then press ?.
6The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial auto installation in progress, press
C.
NOTE
• If you turn off the power on the TV while performing a channel
search in Step 5, the initial auto installation wizard may not
appear. The auto installation function allows you to execute
the installation again from “Setup” > “View setting” (Page 43).
• The initial auto installation wizard will abort if you leave the TV
unattended for 30 minutes before searching for channels in
Step 6.
• Selecting menu of “Digital Search” or “Analogue Search” may
not be displayed in some country.
Checking signal strength and
channel strength (DTV only)
If you install a DTV antenna for the first time or relocate it,
you should adjust the alignment of the antenna to receive
a good reception while checking the antenna setup
screen.
1Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Channel settings” > “Antenna setup-
DIGITAL”.
EChecking signal strength
2Press a/b to select “Signal strength”, and then
press ?.
Supply voltage
CH No.
Current Max.
Signal strength
Signal strength
Channel strength
Current Max.
Quality
97 97
99 99
EChecking channel strength
3Press a/b to select “Channel strength”, and then
press ?.
• You can input a specified frequency band using the 0–9
numeric buttons.
Supply voltage
CH No.
Current Max.
Signal strength MHz
Signal strength
Frequency
Channel strength
Current Max.
Quality
97 97
99 99
4Position and align the antenna so that the
maximum possible values for “Signal strength”
and “Quality” are obtained.
NOTE
• The values of “Signal strength” and “Quality” indicate when to
check the appropriate alignment of the antenna.
Supplying power to the antenna (DTV only)
You can supply power to the antenna in order to receive
digitally/terrestrially broadcast stations after connecting
the antenna cable to the antenna terminal on the rear of
the TV.
1Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Channel settings” > “Antenna setup-
DIGITAL” > “Supply voltage”.
2Press c/d to select “On”, and then press ?.
Quick guide
LC80LE960X_EN_book.indb 18LC80LE960X_EN_book.indb 18 4/4/2014 1:08:03 PM4/4/2014 1:08:03 PM
19
Daily operation
Turning on/off the power – using the control panel of the TV
Turning on/off the power
1Turn on the power.
Press < on the TV (after a few seconds, an image appears with
sound).
• Wait more than five seconds until you press < on the TV after inserting the
power plug.
2Turn off the power.
Switch it off by pressing < on the TV.
NOTE
• Weak electric power is still consumed even when the TV is turned off.
Turning on/off the power – using the remote control unit
EXT MEDIA
TV INFO
MENU
GUIDE
Standby mode
1To standby mode.
If the TV is turn on, you can switch it to standby by pressing <
on the remote control unit.
2Switch on from standby.
From standby, press < on the remote control unit.
NOTE
• If you are not going to use this TV for a long period of time, be sure to remove the AC
cord from the AC outlet.
• A small amount of electric power is still consumed even when the TV is turned off.
Changing channels
1Turn on the power.
2Select a programme using 0–9 numeric buttons or CHr/s on the
remote control unit.
NOTE
• You can also select a programme using CHr/s on the TV control panel.
Operation without a remote control unit
You can operate the menu settings using the TV control
panel.
MENU
INPUT
VOL + /−
CH
TV control panel
buttons
Remote control
buttons
@@
INPUT ?
CH r/CH sa/b
Y k/ Y ld/c
Watching TV
LC80LE960X_EN_book.indb 19LC80LE960X_EN_book.indb 19 4/4/2014 1:08:03 PM4/4/2014 1:08:03 PM
20
Watching TV (DTV only)
Press > to change “DTV” or “ATV”.
NOTE
• When watching Digital Radio or Data broadcasting, the image
is switched to DTV.
• When watching external video source, the image is switched
to ATV or DTV, which was watched lastly.
CH list
You can check the CH list and view detailed information.
MENU
MENU
1Press ? to display the CH list.
2Press a/b to display your desired programme,
and then press ?.
• When you press ?, the TV jumps to the channel.
CH list
Menu
DTV
:Back
:Enter
TV2
HD ColorBar
TV1
SD Moving
TV3
H264 SD-Color Pat…
TV4
H264 HD-Monosco
SD Color Pattern
HD Moving
SD Colour Bar
MPEG SD Moving
005
006
007
008
001
002
003
004
Link
operation
R:Next
:Register Y
:Prev.
G
ATV DTV
3Press c/d to switch broadcast or external video
source.
• Press ? to switch broadcast.
• CH list, whose broadcast is watched, is displayed.
NOTE
• When you watch ATV, you can display channel list by GUIDE.
Programme information (DTV only)
Option
Programme info.
While watching DTV you can check the extended
programme information on the screen using INFO on the
remote control.
TV
T
V
INFO
MENU
MENU
HProgramme info.
HInput Info.
Video : 576i
001 DTV SD Moving
SD Moving
SD Moving
20:00 - 21:00
Audio : STEREO
Age : 11 yrs/over
Optic. REC : OK
• If there is more information, pressing c/d allows you to go
to the next page or return to the previous page.
• You can cancel this info by pressing INFO again.
NOTE
• When you watch ATV, press INFO to display the channel
information.
EUsing Info on the menu screen
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Option for view” > “Programme info.”.
Selecting an external video source
Once the connection is made, press b to display the
“INPUT” screen, and then press b or a/b to switch
over to the appropriate external source with ?.
TV
INPUT
Switchable
CH list
HDMI 1
HDMI 2
ATV DTV
NOTE
• You can also select an external video source from “CH list” >
“INPUT”.
• Only inputs which are not set for “Input skip” (Page 49) and
properly connected inputs can be selected.
Watching TV
LC80LE960X_EN_book.indb 20LC80LE960X_EN_book.indb 20 4/4/2014 1:08:04 PM4/4/2014 1:08:04 PM
21
Switching the digital audio format
(DTV only)
If multi sound modes are received, each time you press
MPX the mode switches as follows.
Audio (ENG) STEREO
L/R LRLR
CH A CH B CH AB
Audio (ENG) CH A
Audio (ENG) MONO
Press c/d to select L or R sound when the STEREO or
DUAL MONO screen is displayed.
Audio (ENG) STEREO
L/R LRLR
NOTE
• The sound mode screen disappears in six seconds.
• Selectable items vary depending on the received broadcasts.
• The audio description sound is selected depending on the
main audio.
Switching the analogue audio
format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
SLEEP
S
LEE
P
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches between
NICAM STEREO and MONO.
Stereo mode
ATV
STEREO
ATV
MONO
When receiving a bilingual signal
Each time you press MPX, the mode switches among
NICAM CH A, NICAM CH B, NICAM CH AB and MONO.
Bilingual mode
ATV
MONO
ATV
CH AB
ATV
CH A
ATV
CH B
When receiving a monaural signal
Each time you press MPX, the mode switches between
NICAM MONO and MONO.
Monaural mode
ATV
MONO
ATV
MONO
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches between
STEREO and MONO.
Stereo mode
ATV
MONO
ATV
STEREO
When receiving a bilingual signal
Each time you press MPX, the mode switches among
CH A, CH B and CH AB.
Bilingual mode
ATV
CH A
ATV
CH B
ATV
CH AB
When receiving a monaural signal
When you press MPX, “MONO” displays.
Monaural mode
ATV
MONO
NOTE
• “BBC1”, “01” and “PAL” are tentative network name, channel
and colour system.
Watching TV
LC80LE960X_EN_book.indb 21LC80LE960X_EN_book.indb 21 4/4/2014 1:08:05 PM4/4/2014 1:08:05 PM
22
Watching TV
Favourite Channel Information
Before installation
This function allows you to group your favourite channels
in a separate list. Pre-setting “My favourite” in advance
allows you to select your favourite channels more
conveniently.
NOTE
• “My Favourite” can only be used for DTV mode.
• The maximum number of channels you can register in “My
favourite” is:
− 50 for TV broadcast which will be allocated 001-050, as
favourite channel numbers
− 50 for Radio broadcast which will be allocated 051-100, as
favourite channel numbers and
− 50 for Data broadcast which will be allocated 101-150, as
favourite channel numbers
How to add / remove / move your favourite
channels
Press ? to display the on-screen channel list.
CH list
Menu
DTV
:Back
:Enter
TV2
HD ColorBar
TV1
SD Moving
TV3
H264 SD-Color Pat…
TV4
H264 HD-Monosco
SD Color Pattern
HD Moving
SD Colour Bar
MPEG SD Moving
005
006
007
008
001
002
003
004
Link
operation
R:Next
:Register Y
:Prev.
G
ATV DTV
You can use the function buttons to edit highlighted
channel from the channel list.
• If you have already set your favourite channels, you will
be able to see “CH list” or “My favourite” depending on
your previous selection.
Function buttons used to edit “My favourite”
Buttons Description
R button
Add to “My favourite” list or remove from “My
favourite” list.
The “ ” mark will be added to or removed
from the selected channel.
B button
Move channel position in “My favourite”
list. (“My favourite” channel numbers will be
sequentially allocated.)
NOTE
• If you delete a channel via the “Manual adjust” option
(“HOME” > “TV Menu” > “Setup” > “View setting” > “Channel
settings” > “Programme setup” > “Digital setting” > “Manual
adjust”), this will be deleted from both the “CH list” and “My
favourite” list.
Selecting channels from “My favourite” list
1How to move between “My favourite” list and
“CH list”.
1Press ? when you watching DTV to bring up
the “CH list”.
2Press d and select “My favourite” list.
2Move up and down the displayed channel list
using a/b then press ? to select the desired
channel.
NOTE
• When watching your favourite channels via “My favourite” list,
you can directly select other favourite channel by entering the
favourite channel number on the remote control.
• Selecting the EPG function while using “My favourite” channel
list, will only show details for the favourite channels you have
added. (To view details of all available channels via the EPG,
please switch back to “CH list” mode from “My favourite”
by following the steps shown in 1 (1) and reselect “CH list”
before pressing GUIDE.)
Operator profile
In case your CI Plus CAM supports Operator profile, your
CAM will inform you and guide you through the Operator
profile installation.
When operator's profile is added by the CAM, it will be
displayed in the CH list menu. Each profile will be
stored as an independent list in the TV.
You can delete operator profile you added.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Channel settings” > “Programme setup” >
“Operator profile management”.
NOTE
• The TV supports 2 operator profiles.
• Operator profile can have mixed services such as T/C/S1/S2/
S3/S4, but will only be displayed based on the network and
media type you select.
LC80LE960X_EN_book.indb 22LC80LE960X_EN_book.indb 22 4/4/2014 1:08:06 PM4/4/2014 1:08:06 PM
23
Teletext
What is teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped TV. Your TV receives
teletext signals broadcast by a TV network, and decodes
them into graphical format for viewing. News, weather
and sports information, stock exchange prices and
programme previews are among the many services
available.
Turning teletext on/off
1Select a TV channel or external source providing a
teletext programme.
2Press m to display the teletext.
3Press m again to display the teletext on the right
screen and the normal image on the left screen.
• Many stations use the TOP operating system, while some use
FLOF (e.g., CNN). Your TV supports both these systems. The
pages are divided into topic groups and topics. After switching
on the teletext, up to 2,000 pages are stored for fast access.
• If you select a programme with no teletext signal, “No Teletext
available” displays.
• The same message displays during other modes if no teletext
signal is available.
TELETEXT
TELETEXT
• Each time you press m, the screen switches as shown above.
NOTE
• Teletext will not work in 3D mode.
Buttons for teletext operations
Buttons Description
CHr/sIncrease or decrease the page number.
Colour
(R/G/Y/B)
Select a group or block of pages displayed
in the coloured brackets at the bottom of
the screen by pressing the corresponding
colour (R/G/Y/B) on the remote control
unit.
Numeric
buttons 0–9
Directly select any page from 100 to 899 by
using the 0–9 numeric buttons.
k (Reveal
hidden teletext)
Reveal or hide hidden information such as
an answer to a quiz.
3 (Freeze/
Hold)
Stop updating teletext pages automatically
or release the hold mode.
[ (Subtitle for
teletext)
Display the subtitle or exit the subtitle
screen.
Subtitles will not be displayed when
the service does not contain subtitle
information.
1 (Subpage)
Reveal or hide subpages.
Selects directly the desired subpage (0-9).
•
Move to the previous subpage (R).
•
Move to the following subpage (G).
•
These two buttons are shown on the
screen by the symbols “e” and “f”.
v (Top/
Bottom/Full)
Switch the Teletext image to Top, Bottom
or Full.
?
Display the top menu.
•
The top menu will not be displayed when
the service does not support top menus.
View setting
Text language
If Teletext information does not display correctly, perform
the procedure below.
Select from among six kinds of language tables: West
Europe, East Europe, Greek/Turkish, Cyrillic, Arabic and
Farsi.
Each table is compatible with the Teletext languages
listed below.
1Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Text language”.
BackSelect
West Europe
Text language
East Europe
Farsi
Greek/Turkish
Cyrillic
Arabic
Teletext language settings
• West Europe — English, French, Scandinavian, Turkish,
German, Spanish, Italian
• East Europe — Polish, French, Scandinavian, Czech,
German, Slovenian/Croatian, Italian, Rumanian
• Greek/Turkish — English, French, Scandinavian, Turkish,
German, Spanish, Italian, Greek
• Cyrillic — English, Russian, Estonian, Czech, German,
Slovenian/Croatian, Ukrainian, Lettish
• Arabic — English, French, Scandinavian, Turkish,
German, Hebrew, Italian, Arabic
• Farsi — English, French, Scandinavian, Turkish, German,
Hebrew, Italian, Farsi
NOTE
• Teletext can be displayed only when it is sent by a network.
Not used to convert between languages.
Watching TV
LC80LE960X_EN_book.indb 23LC80LE960X_EN_book.indb 23 4/4/2014 1:08:06 PM4/4/2014 1:08:06 PM
24
View setting
Initial teletext page (DTV only)
If you set the language of the initial page (this page is
displayed for the first time after pressing m) for teletext
in DTV mode, it will start from the selected language
page.
1Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Initial teletext
page”.
2Press a/b/c/d to select the desired language,
and then press ?.
NOTE
• This function is available for teletext in DTV mode. This is not
available for teletext in ATV or external input mode.
• If the initial teletext page of the selected language in this
function is not included in a received broadcast, the default
initial page will be displayed.
View setting
MHEG-5 (EPG) (DTV only)
This function is set to enable MHEG-5 in DTV mode.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “MHEG-5 (EPG)”.
Item
Enable MHEG-5 is displayed during DTV mode.
Disable MHEG-5 is not displayed during DTV
mode.
NOTE
• This function is only displayed for models for the New Zealand
market. This function is not displayed for models for the other
market than “New Zealand”.
• When the country setting is set to “New Zealand” in the initial
auto installation, this function is available. When the country
setting is set to countries other than “New Zealand”, then this
item is grayed out and cannot be selected.
• The MHEG-5 is not displayed when there is no MHEG-5
information on broadcast in setting this function to “Enable”.
• When this function is set to “Enable”, subtitles may not be
displayed. If this occurs, set to “Disable” and then display of
subtitles will be possible.
Watching TV
LC80LE960X_EN_book.indb 24LC80LE960X_EN_book.indb 24 4/4/2014 1:08:06 PM4/4/2014 1:08:06 PM
25
Watching TV
EPG (DTV only)
EPG is a programme list that is displayed on the screen.
With the EPG, you can check the schedule of DTV/
RADIO/DATA, view detailed information about them, tune
to an event currently on-air.
Useful settings for using EPG
Basic setting
View setting
EPG
If you want to use the EPG for digital stations, select
“Yes”. The EPG data must be automatically captured
while the TV is in standby mode. After setting to “Yes”,
it may take some time to turn off the power using the
remote control unit or the TV due to the data capture
process.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Standby search”
> “EPG”.
ESelecting EPG to “Yes” will result in higher power
consumption*.
ESelecting EPG to “No” will save power consumption.
NOTE
* Approximately 23W or more for 15-30 minutes (depending
on number of channels tuned) after power off from remote
control.
If you connect additional peripherals eg. USB / HDMI, the
power consumption could rise to 50W.
• EPG data will not update if the TV is turned off from the
power switch at the TV control panel.
• “EPG” cannot be selected when the country setting is set to
“New Zealand”.
EPG display settings
Option
Display range setup
The “Display range setup” allows you to select three
types of time spans for display on the screen.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “EPG setup” > “Display range setup”.
Item
Mode 1
(Wide angle)
Displays six hours of programme
information.
Mode 2
(Zoom)
Displays three hours of programme
information.
Mode 3
(Vertical angle)
Changes to the EPG display format with a
vertical time span.
NOTE
• “Display range setup” cannot be selected when the country
setting is set to “New Zealand”.
Option
Genre icon setup
You can grey out or place a mark on desired genres and
smoothly search for programmes you frequently watch.
1Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “EPG setup” > “Genre icon setup”.
2Press a/b to select the desired genre, and then
press ?.
EGenre icon list
Genre icon list for Australia
Icon Genre Icon Genre
Movie Current affairs
News Education/
Information
Entertainment Infotainment
Sport Special
Children’s Comedy
Music Drama
Arts/Culture Documentary
Genre icon list except Australia
Icon Genre Icon Genre
Movie/Drama Music/Ballet/
Dance
News/Current
affairs
Arts/Culture
(without music)
Show/Game show Social/Political
issues/Economics
Sports
Education/
Science/Factual
topics
Children’s/Youth
programmes Leisure hobbies
3Press a/b to select a level to pick out or search
for programmes you want to watch (“Standard”,
“Light”, “Remark”).
LC80LE960X_EN_book.indb 25LC80LE960X_EN_book.indb 25 4/4/2014 1:08:07 PM4/4/2014 1:08:07 PM
26
Selecting a programme using EPG (DTV only)
Basic operation
EDisplay the EPG screen
Press GUIDE.
GUIDE
EPG
001
20 21 22 23 0 1
: Select : Enter : Back : Exit Programme info. Search by genre Search by date Timer list
[Fri] 1/4 20:00Today [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri]8
EPG [DTV-TV]
20:00 - 21:00
TV1 SD Moving
TV1
TV2
TV3
TV4
SD Color Pattern
HD Moving
SD Color Bar
HD ColorBar
H264 SD-Color P...
H264 HD-Monosco
HD ColorBar
H264 SD-Color Pattern
SD Moving
HD ColorBar
H264 SD-Color Pattern
H264 HD-Monosco
SD Moving SD Moving
H264 HD-Monosco
001
002
003
004
005
MPEG SD Moving 008
006
007
GUIDE
EDisplay the EPG screen
1Press c/d to select the time span you want to
search.
• Continue to press d to display programmes in the next
time span.
2Press a/b to select the desired programme.
• If a or b are displayed on the left of the services,
continue to press a/b to display next or previous
screen.
EClose the EPG screen
Press GUIDE again.
NOTE
• You can also display the EPG screen from “HOME” >
“TV Menu” > “EPG” > “EPG”.
• The time displayed on the EPG is information sent by the TV
station.
• When the country setting is set to “New Zealand”, the EPG
screen and operation differ due to the use of MHEG-5 EPG.
The EPG screen and operation vary depending on the
broadcasts.
• When the country setting is set to “New Zealand”, the
EPG function is not available when MHEG-5 EPG is not
broadcasted.
• MHEG-5 EPG may not be displayed properly in the 3D mode.
If so, cancel the 3D mode and then MHEG-5 EPG will be
available.
• The MHEG-5 EPG function is not available for models for the
market other than New Zealand.
Selecting a programme
3Check programme information
1Press a/b/c/d to select the programme you
want to check.
2Press R.
Programme information
EPG [DTV-TV]
001
20:00 – 21:00
TV1 SD Moving
20 21 22 23 0 1
TV1
TV2
TV3
TV4
SD Color Pattern
HD Moving
SD Color Bar
HD ColorBar
H264 SD-Color P...
H264 HD-Monosco
HD ColorBar
H264 SD-Color Pattern
SD Moving
HD ColorBar
H264 SD-Color Pattern
H264 HD-Monosco
SD Moving SD Moving
H264 HD-Monosco
001
002
003
004
005
MPEG SD Moving 008
006
007
: Select : Enter : Back : Exit
Programme Info.
Back to EPG
[Fri] 1/4 20:00Today [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri]8
Next
GUIDE
3Press ? to tune to the selected programme.
NOTE
• When the country setting is set to “New Zealand”, this
function is not available due to the use of MHEG-5 EPG.
Watching TV
LC80LE960X_EN_book.indb 26LC80LE960X_EN_book.indb 26 4/4/2014 1:08:07 PM4/4/2014 1:08:07 PM
27
4Search a programme in a category
1Press G.
2Press a/b to select the desired genre, and then press ?.
3Press a/b to select a programme you want to watch, and then press ?.
EPG [DTV-TV] [Fri] 1/4 20:00
Today [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri]8
Back to EPG
: Select : Enter : Back : Exit
Movie
News
Entertainment
Sports
Children’s
Music
Arts/Culture
Found no programme by the genre.
Select other time by c d
Current affairs
Education/Information
Infotainment
Special
Drama
Documentary
[Today] 1 12-0
Search by genre
[Sat] 2 0-12 [Sat] 2 12-0 [Sun] 3 0-12
Comedy
GUIDE
NOTE
• The genre information depends on the broadcasts.
• You can also display the EPG screen from “HOME” > “TV Menu” > “EPG” > “Search by genre”.
• When the country setting is set to “New Zealand”, this function is not available due to the use of MHEG-5 EPG.
5Search for a programme by date/time
1Press Y.
2Press c/d to select the desired time span and then press ?.
EPG [DTV-TV]
6 7 8 9 10 11
: Select : Enter : Back : Exit
Search by time
Back to EPG Next
Next Prev. 0 – 6 6 – 12 12 – 18 18 – 0
: Select time Enter Prev.
: Enter
Today
[Fri] 1/4 20:00Today [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri]8
TV1
TV2
TV3
TV4
SD Color Pattern
HD Moving
SD Color Bar
HD ColorBar
H264 SD-Color P...
H264 HD-Monosco
HD ColorBar
H264 SD-Color Pattern
SD Moving
HD ColorBar
H264 SD-Color Pattern
H264 HD-Monosco
SD Moving SD Moving
H264 HD-Monosco
001
002
003
004
005
MPEG SD Moving 008
006
007
GUIDE
3Press a/b to select the desired programme, and then press ?.
NOTE
• When you select a programme outside of the current time span, the timer setting screen displays (Page 28).
• You can also display the EPG screen from “HOME” > “TV Menu” > “EPG” > “Search by date”.
• When the country setting is set to “New Zealand”, this function is not available due to the use of MHEG-5 EPG.
6Display the timer list for TV programmes
Press B.
• Refer to page 28 for the timer setup.
Watching TV
LC80LE960X_EN_book.indb 27LC80LE960X_EN_book.indb 27 4/4/2014 1:08:08 PM4/4/2014 1:08:08 PM
28
Watching TV
Timer setup using EPG
The TV can be switched to a programme or start
recording for USB-recording at the set time.
1Press GUIDE.
2Press a/b/c/d to select the programme you
want to set, and then press ?.
3Press c/d to select “Watch” or “Record”, and
then press ?.
• If you select “No”, the TV returns to the EPG screen.
Watch
No
Record
4Press c/d to select “Yes”, and then press ?.
• The selected TV programme is marked with an icon.
5Press ? to select “Back”.
NOTE
• You cannot select “Record” when the registered USB HDD is
not connected to the USB port.
• A combined total of 16 timer settings (“Watch” and “Record”)
can be set.
*Important information:
A CAM (CI Plus v1.3) PIN code may be necessary
to record broadcasts scrambled due to parental rate
settings.
When a CAM PIN code is required for recording a
programme, it is necessary to enter the CAM PIN
code in advance (Page 15).
If a CAM PIN code is not entered or is entered
incorrectly, the programme may not be able to be
recorded/played back.
Cancelling the timer setup
1Press GUIDE.
2Press a/b/c/d to select the programme with
timer setup, and then press ?.
3Press c/d to select “Cancel”, and then press ?.
4Press c/d to select “Yes”, and then press ?.
ECancelling using B button on the remote
control unit
1Press GUIDE.
2Press B to display the timer setup list.
3Press a/b to select the programme you want to
cancel timer setup, and then press ?.
4Press c/d to select “Cancel”, and then press ?.
5Press c/d to select “Yes”, and then press ?.
LC80LE960X_EN_book.indb 28LC80LE960X_EN_book.indb 28 4/4/2014 1:08:08 PM4/4/2014 1:08:08 PM
29
E Before connecting ...
• Be sure to turn off the TV and any devices before making any connections.
• Firmly connect a cable to a terminal or terminals.
• Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible
audiovisual quality to maximise the potential of the TV and the connected device.
• Refer to page 71 for connecting a PC to the TV.
Connection cable
(Connection code)
Image quality/
Audio quality Connectable devices Reference
page
HDMI cable ※Excellent in both
image quality
and audio
quality Reproduction devices such as a DVD player
Game console
30
DVI/HDMI cable/3.5 mm stereo
minijack cable
Good image
quality
Component cable
Audio cable
Average in both
image quality
and audio
quality Reproduction devices such as a DVD player
31, 49
AV cable (Supplied)
AV cable
Average in both
image quality
and audio
quality
Reproduction devices such as a DVD player
Game console
31, 49
Optical audio cable Excellent in
audio quality
Audio equipment
32
Stereo conversion cable
Average in
audio quality
※ NOTE
• When connecting 4K (3,840 x 2,160 (Ultra HD) 30Hz, 25Hz, 24Hz) equipment to the TV, use the HDMI 1,2,3,4 terminal and use
HDMI cable of High speed type.
Connecting external devices
LC80LE960X_EN_book.indb 29LC80LE960X_EN_book.indb 29 4/4/2014 1:08:08 PM4/4/2014 1:08:08 PM
30
Connecting external devices
Video connections
HDMI connection
Example of connectable devices
EDVD player/recorder
EBlu-ray player/recorder
EGame console
The HDMI connections permit digital video and audio
transmission via a connection cable from a player/
recorder. The digital picture and sound data are
transmitted without data compression and therefore lose
none of their quality. Analogue/digital conversion is no
longer necessary in the connected devices, which also
would result in quality losses.
(DC 5V 900mA)
ARC
p
n
o
3.5 mm stereo minijack cable (commercially available)
DVI/HDMI cable (commercially available)
HDMI-certified cable (commercially available)
DVI/HDMI conversion
Using a DVI/HDMI cable, the digital video signals of
a DVD can also be played via the compatible HDMI
connection. The sound must be fed in additionally.
• When connecting a DVI/HDMI cable to the HDMI terminal, the
image may not come in clearly.
• Both HDMI and DVI use the same HDCP copy protection
method.
E When using the HDMI 2 terminal
You must set the audio signal input source depending on
the type of HDMI cable connected (refer to page 49 for
details).
HDMI-certified cable
1Press b to select “HDMI2” from the
“INPUT” menu, and then press ?.
2Go to “HOME” > “TV Menu” > “Setup” >
“Option” > “Terminal setting” > “Audio select”
> select “HDMI”.
DVI/HDMI cable
1Press b to select “HDMI2” from the
“INPUT” menu, and then press ?.
2Go to “HOME” > “TV Menu” > “Setup” >
“Option” > “Terminal setting” > “Audio select”
> select “HDMI + Analogue”.
NOTE
• If a connected HDMI device is AQUOS LINK
compatible, you can take advantage of versatile
functions (Pages 33–36).
• Video noise may occur depending on the type of HDMI cable
used. Make sure to use a certified HDMI cable.
• When playing the HDMI image, the best possible format for
the picture will be detected and set automatically.
• An ARC (Audio Return Channel) compatible audio receiver
must be connected to the HDMI 3 terminal with an ARC-
compatible cable.
• All HDMI terminals support 3D image signals.
• HDCP 2.2 copy protected signal can be viewed via HDMI 1
terminal only.
Supported video signal
576i, 576p, 480i, 480p, 1080i, 720p, 1080p, 2160p.
See page 72 for PC signal compatibility.
NOTE
• When connecting 4K (3,840 x 2,160 (Ultra HD) 30Hz, 25Hz,
24Hz) equipment to the TV, use the HDMI 1,2,3,4 terminal
and use HDMI cable of High speed type.
Supported audio signal
Linear PCM, sampling rate 32/44.1/48kHz.
Dolby Digital, DTS.
LC80LE960X_EN_book.indb 30LC80LE960X_EN_book.indb 30 4/4/2014 1:08:10 PM4/4/2014 1:08:10 PM
31
Connecting external devices
YPB
(CB)
PR
(CR) Component connection
Example of connectable devices
EVCR
EDVD player/recorder
You will enjoy accurate colour reproduction and high quality images through the INPUT 6 terminal when connecting a
DVD player/recorder or other device.
n
o
INPUT 6
6
COMPONENT
AUDIO-L
(White)
AUDIO-R (Red)
PR (Red)
PB (Blue)
Y (Green)
Component cable (commercially available)
Audio cable (commercially available)
VIDEO connection
Example of connectable devices
EVCR
EDVD player/recorder
EGame console
ECamcorder
You can use the INPUT 5 or INPUT 6 terminal when connecting to a game console, camcorder, a DVD player/recorder
or other device.
AV IN
AUDIO (L/R)
INPUT 5
5
INPUT 6
COMPONENT
6
VIDEO (Yellow)
AUDIO-L (White)
AUDIO-R (Red)
AV cable (supplied accessory)
AV cable (commercially available)
VIDEO (Yellow)
AUDIO-L (White)
AUDIO-R (Red)
or
LC80LE960X_EN_book.indb 31LC80LE960X_EN_book.indb 31 4/4/2014 1:08:10 PM4/4/2014 1:08:10 PM
32
Audio connections
Speaker/amplifier connection
Connect an amplifier with external speakers as shown
below.
EConnecting an amplifier with digital/
analogue audio inputs
n
o
DIGITAL
AUDIO
OUTPUT
AUDIO(L/R)
OUTPUT
Optical audio cable (for digital audio) (commercially
available)
Stereo conversion cable (for analogue audio)
(commercially available)
* This terminal is also used for headphones. Reduce the
volume before using headphones. Overwhelming sound may
damage your hearing.
Notice
When connecting an optical audio cable to the DIGITAL AUDIO OUTPUT terminal, check the direction carefully, and
insert it straight in while aligning the bottom side. Forcing it could cause damage to the terminal.
*1 *2
(*1)
Turn the flat surface aligning
the jack shape and insert it
straightly.
(*2)
Do not insert upside-down. Do not twist when inserting.
(Drawing from a side view)
Do not insert sideways.
NOTE
• If the image is not in sync with the audio, check the settings
of the connected surround system.
EAfter connecting
Digital audio output setting
After connecting an amplifier with digital audio input and
external speakers as shown, you should set an audio
output format compatible with the programme you are
watching or the device connected.
Go to “HOME” > “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Digital audio output” > select
“PCM” or “Bitstream”.
NOTE
• When set to “Bitstream”, Dolby Digital is output when the Dolby
Digital or Dolby Digital Plus audio formats are received. When
set to “PCM”, PCM is output no matter what audio formats are
received.
• When set to “Bitstream”, HE-AAC audio formats can be output
as Dolby Digital.
• When set to “Bitstream”, Dolby Digital Plus can be output as
Dolby Digital.
Connecting external devices
LC80LE960X_EN_book.indb 32LC80LE960X_EN_book.indb 32 4/4/2014 1:08:10 PM4/4/2014 1:08:10 PM
33
AQUOS LINK
Controlling HDMI devices using AQUOS LINK
EWhat is AQUOS LINK?
Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV
amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit.
By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV
amplifier using the remote control of the TV.
NOTE
• AQUOS LINK-compatible AQUOS AUDIO speaker system and AQUOS recorder are scheduled to be on sale after the release of
this TV.
• AQUOS LINK does not work while using USB-recording functions.
EWhat you can do with AQUOS LINK
✓One touch recording (DTV only)
You do not have to search for the remote control unit of your recording device. Press REC E or REC STOP H to
start/stop recording what you see on the recorder.
✓One touch play
When the TV is in standby mode, it will automatically turn
on and play back the image from the HDMI source.
✓Operating title list of external devices
In addition to displaying the TV’s own timer list (Page 27),
you can also call up the external player’s top menu or
AQUOS BD player’s/AQUOS recorder’s title list provided
that the devices support AQUOS LINK.
✓Controlling the AQUOS LINK-
compatible audio system
You can adjust the volume and select the sound mode of
the AQUOS LINK-compatible audio system.
✓Multiple control of HDMI devices
You can select which HDMI device to operate using the
“Link operation” menu.
✓Single remote control operation
AQUOS LINK automatically recognises connected HDMI
devices and you can control the TV and the devices as if
using a universal remote control unit.
NOTE
• When you use AQUOS LINK, make sure to use a certified HDMI cable.
• Point the remote control unit toward the TV, not to the connected HDMI device.
• Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified HDMI cable.
• Up to three HDMI recording devices, one AV amplifier and three players can be connected using this system.
• These operations affect the HDMI device selected as the current external source. If the device does not operate, turn on the device
and select the appropriate external source using b.
• When you insert/remove HDMI cables or change connections, turn on all connected HDMI devices before turning on the TV.
Confirm that picture and audio are correctly displayed/output by selecting “HDMI1”, “HDMI2”, “HDMI3” or “HDMI4” from the
“INPUT” menu.
LC80LE960X_EN_book.indb 33LC80LE960X_EN_book.indb 33 4/4/2014 1:08:11 PM4/4/2014 1:08:11 PM
34
AQUOS LINK connection
First connect the AQUOS AUDIO speaker system or an AQUOS BD player/AQUOS recorder that supports the HDMI
CEC protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices’
power have been turned on. Change the external input source by pressing b, select the appropriate external source and verify
the audiovisual output.
Connecting an AQUOS BD player/AQUOS recorder
via the AQUOS AUDIO speaker system
n
n
o2
1
DIGITAL
AUDIO
OUTPUT
(DC 5V 900mA)
ARC
AQUOS BD player/AQUOS recorder AQUOS AUDIO speaker system
HDMI-certified cable
(commercially available)
Optical audio cable
(commercially available)
*1 The ARC (Audio Return Channel) function works only when using the HDMI3 terminal.
*2 When you use an audio system compatible with the ARC function of the TV, you do not
need to connect an optical audio cable to the TV.
Connecting an AQUOS BD
player/AQUOS recorder only
n
(DC 5V 900mA)
ARC
AQUOS BD player/AQUOS recorder
Regarding “Select recording device”
Select the device for recording from connected devices.
NOTE
• This function enables you to select either the USB HDD for USB-recording use or the HDMI device with CEC protocol.
1Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Select recording device”.
2Select the device for recording using the REC E on the remote control unit.
• Select “USB-HDD” when using the REC E for USB recording.
• Select “HDMI device” when using the REC E for recording to the HDMI device.
3Press RETURN to end the operation.
AQUOS LINK
LC80LE960X_EN_book.indb 34LC80LE960X_EN_book.indb 34 4/4/2014 1:08:11 PM4/4/2014 1:08:11 PM
35
AQUOS LINK
Operating an AQUOS LINK device
AQUOS LINK allows you to operate the HDMI-connected
device with a single remote control unit.
EXT MEDIA
Use the following procedure to start playback.
1Press I to start playback of a title.
• See the section Top menu/title list if you want to start
playback using the list of the titles in the AQUOS BD
player/AQUOS recorder.
2Press J to fast forward.
Press G to reverse.
Press H to stop.
Press F to pause.
Press Kto skip to previous chapter.
Press Lto skip to next chapter.
Press SOURCE to turn the HDMI-connected
device on/off.
Use the following procedure to start recording.
Check the following items before recording.
• Make sure the antenna cable is connected properly.
• Check if the recording media (HDD, DVD, etc.) has enough
capacity for recording a programme.
• Select the equipment for recording in Selecting Recorder.
1After you selected recording media (HDD, DVD,
etc.) in the menu, please make sure the recording
menu in the ready condition.
2Press REC E to start recording.
3Press REC STOP H to stop recording.
AQUOS LINK menu
Go to “HOME” > “TV Menu” > “Link operation” > select the menu you want to set.
Link Operation Description Note
Recorder power on/off
This function is for turning of the CEC-compatible
recorder on/off.
Every time you press ? in “Recorder power on/off”,
the CEC-compatible recorder will be turned on/off.
• Refer to the operation manual of the recorder for
details.
Top menu/title list
This section explains how to play back a title in the
AQUOS BD player/AQUOS recorder.
Press @ to hide the menu screen to operate
a/b/c/d buttons.
Select the title with a/b/c/d, and then press
I (PLAY).
• The linked recorder now powers on and the TV
automatically selects the appropriate external input
source.
• The title list data from the connected AQUOS BD
player/AQUOS recorder displays.
Setup menu
You can call up the menu of an HDMI CEC-compatible
external device (player, recorder, etc.) using the “Setup
menu” function.
• If a connected device does not have this function
or the device is in a status where the menu cannot
be displayed (recording, entering standby, etc.), this
function may not be available.
Media change
If your recorder has multiple storage media, select the
media type here.
Select the desired medium, such as DVD recorder or
HDD. The media type changes every time you press
?.
Recorder EPG
You can call up the CEC-compatible recorder’s EPG and
preset timer recordings using the TV’s remote control.
Select the programme to record.
• The external input source switches and the recorder’s
EPG is displayed.
• You can use a/b/c/d, C, B and the
coloured buttons.
• Refer to the operation manual of the recorder for
details.
Change audio output device You can choose to listen to the TV sound only from the
AQUOS TV speaker system.
Sound mode change
You can manually change the AQUOS AUDIO speaker
system’s sound mode.
The sound mode changes every time you press ?.
• Refer to the operation manual of the AQUOS AUDIO
speaker system for details.
Model select
If multiple HDMI devices are connected in a daisy chain,
you can specify which device to control here.
The HDMI device changes every time you press ?.
AQUOS LINK setup See page 36 for details.
LC80LE960X_EN_book.indb 35LC80LE960X_EN_book.indb 35 4/4/2014 1:08:11 PM4/4/2014 1:08:11 PM
36
AQUOS LINK
AQUOS LINK control Set to “On” to enable HDMI CEC functions.
Auto power on
If this is activated, the one touch play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image from
the HDMI source.
• The factory default for this item is “Off”.
Selecting recorder
Here, you can select a recorder for the recording from
several connected recorders.
• If you have connected the AQUOS AUDIO speaker
system between the TV and an AQUOS recorder,
the external source’s indication changes (e.g., from
“HDMI1” to “HDMI1 (Sub)”).
Selecting channel key
This function allows you to select the channel of the
connected HDMI device using the TV’s remote control
unit.
Press a/b to select the input source of the connected
HDMI device you want to control using the TV’s remote
control unit, and then press ?.
Press c/d to select “On”, and then press ?.
Using genre info.
This function allows you to automatically switch to
the appropriate sound mode depending on the genre
information included the digital broadcast.
Audio return channel
If this function is set to “Auto”, the TV can send audio
data for video content shown on the TV to a connected
audio device with just one ARC-compatible cable. Using
this function eliminates the need to use a separate
digital or analogue audio cable.
• The ARC (Audio Return Channel) function works only
when using the HDMI 3 terminal.
Connection for using “Audio return channel”
• You need to use ARC-compatible cables/devices and connect to the HDMI3 terminal to activate this function. The connection
method is the same as Connecting an AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system
(Page 34).
Using a Smartphone with the TV
This function enables you to connect the TV to a smartphone that supports Mobile High-Definition Link (MHL) using an
MHL-compatible cable.
To connect the TV to your MHL-compatible smartphone, be sure to use an MHL-compatible cable (commercially
available).
• You can view pictures and video on a large screen.
• You can play back music files.
(DC 5V 900mA)
MHL-compatible cable
HDMI 4 terminal (Rear side)
NOTE
• An MHL-compatible portable device is required to use this function. Connect the device to the HDMI 4 terminal.
• This production incorporates MHL 1.
LC80LE960X_EN_book.indb 36LC80LE960X_EN_book.indb 36 4/4/2014 1:08:11 PM4/4/2014 1:08:11 PM
37
MENU
MENU
EAuto power on
When an MHL-compatible device is connected to the TV, the TV turns
on automatically.
• This function operates when “AQUOS LINK control” is set to “On”. (See
page 36.)
EAuto input selection
When an MHL-compatible device is connected while the TV is on, the
input mode is selected automatically.
• This function operates when “AQUOS LINK control” is set to “On”. (See
page 36.)
EOperation Using the Remote Control
The remote control of the TV can be used to operate a portable
device.
• a/b/c/d, ?, B, 0-9, etc.
• The operations vary depending on the connected equipment and content
being viewed.
AQUOS LINK
LC80LE960X_EN_book.indb 37LC80LE960X_EN_book.indb 37 4/4/2014 1:08:11 PM4/4/2014 1:08:11 PM
38
Picture settings
Go to “HOME” > “TV Menu” > “Setup” > “Picture”.
Setup
AV mode
Picture
[Bright room]
OPC [Off]
THX room mode setting
[Off]
Clear Picture Processing
[Middle]
[STANDARD]
[STANDARD]
CH list
:Back:Enter
Menu
Backlight
Quattron Pro drive
: Select
NOTE
• After selecting a menu such as “AV mode”, “Quattron Pro
drive”, “THX room mode setting”, “Clear Picture Processing”,
“OPC”, “Backlight”, “Contrast”, “Brightness”, “Colour”, “Tint”
and “Sharpness”, you can adjust while viewing more of the
screen area by pressing ? to make the menu smaller.
• For resetting all adjustment items to factory preset values,
press a/b to select “Reset”, press ?, press a/b to select
“Yes”, and then press ?.
Picture
AV mode
“AV mode” gives you several viewing options to choose from
to best match the system environment, which can vary due
to factors like room-brightness, type of programme watched
or the type of image input from external equipment.
Press a/b to select the desired mode, and then
press ?.
• You can also switch the mode on the “Picture” and “Audio”
menu screen by pressing #.
Item
AUTO
The TV automatically sets the appropriate selection
from the “AV mode” menu depending on the lighting
conditions and the type of programme watched.
STANDARD*1
For a highly defined image in a normally bright room.
MOVIE
For viewing a movie in a darkened room.
MOVIE THX
For viewing movie mode is based on THX standard.
GAME (Standard/
High motion)
For playing of video games.
PC*2
For PC.
USER
Allows you to customise settings as desired. You
can set the mode for each input source.
x.v.Colour*3
Produce realistic colour on the TV screen unlike any
other signal.
DYNAMIC
For a clear-cut image emphasising high contrast for
sports viewing.
DYNAMIC (Fixed)
For a clear-cut image emphasising high contrast for
sports viewing (the “Picture” and “Audio” settings
cannot be adjusted).
STANDARD (3D)
Refer to page 81 for details.
GAME (3D)
NOTE
*1 When the country setting is set to “New Zealand”, only “STANDARD
(ENERGY STAR)” is available.
*2 “PC” is available only when selecting “HDMI1”, “HDMI2”, “HDMI3”,
“HDMI4” or “PC” from the “INPUT” menu.
*3 “x.v.Colour” is available only when accepting an “x.v.Colour” signal
through an HDMI terminal.
• You can select a different “AV mode” item for each input
mode (for example, select “STANDARD” for TV input and
“DYNAMIC” for VIDEO input).
• If you select “AUTO”, some selections in the “AV mode” menu
may not be automatically set.
• “Game type” mode can be set. Refer to “Game type” on page
40
.
Picture
Quattron Pro drive
Configures Quattron Pro drive mode settings:
Item
Mode 1 Enhance the picture brightness.
Mode 2 Enhance the sense of definition.
Off Expand the view angle.
NOTE
• When Quattron Pro drive mode is set to “Mode 1” or “Mode
2”, the following modes do not work:
− Motion enhancement (AquoMotion 800/960 and
AquoMotion 200/240).
If you want to use this mode, set Quattron Pro drive to
“Off”.
• Quattron Pro drive is not available when:
− AquoMotion 800/960 and AquoMotion 200/240 mode is
selected.
− 3D mode is “On”.
Picture
THX room mode setting
Adjust the picture to room illumination or ambient
brightness. This function available only when AV mode is
set to “MOVIE THX”.
Item
Bright room Select this item for a bright room.
Dark room Select this item for a dark room.
Picture
Clear Picture Processing
Processes noise included in broadcast signals to improve
picture quality.
Item
High
Improves picture quality through Clear
Picture Processing at a level above
“Middle”.
Middle
Off
Turn OFF the function for improving
picture quality through Clear Picture
Processing.
Basic adjustment
LC80LE960X_EN_book.indb 38LC80LE960X_EN_book.indb 38 4/4/2014 1:08:11 PM4/4/2014 1:08:11 PM
39
Picture
OPC
Automatically adjusts the brightness of the screen.
Item
Off
The brightness is fixed at the value set in
“Backlight”.
On
Automatically adjusts.
On:Display
Displays the OPC effect on the screen while
adjusting the brightness of the screen.
NOTE
• When set to “On”, the TV senses the surrounding light and
automatically adjusts the backlight brightness. Make sure no
object obstructs the OPC sensor, which could affect its ability
to sense surrounding light.
• When “Backlight” is adjusted, “OPC” is set to “Off”.
Picture
Picture adjustments
Adjusts the picture to your preference with the following
picture settings.
Adjustment items
Selectable
items c (Cursor) d (Cursor)
Backlight
The screen dims The screen brightens
3D brightness
boost
Refer to page 81 for details.
Contrast
For less contrast For more contrast
Brightness
For less brightness For more brightness
Colour
For less colour
intensity
For more colour
intensity
Tint
Skin tones become
reddish
Skin tones become
greenish
Sharpness
For less sharpness For more sharpness
NOTE
• “OPC”, “Backlight” and “Range of OPC” are not available
when “High” or “Low” is selected in “3D brightness boost”.
Picture
Advanced
This TV provides various advanced functions for
optimising the picture quality.
Go to “HOME” > “TV Menu” > “Setup” > “Picture”
> “Advanced”.
C.M.S.-hue
This function adjusts the hue of a selected colour using a
six-colour adjustment system.
C.M.S.-saturation
This function increases or decreases the saturation of a
selected colour using a six-colour adjustment system.
C.M.S.-value
This function adjusts the brightness of a selected colour
using a six-colour adjustment system.
Colour gamut range
Adjusts the range of a subset of colour to display
the image. Expanded colour gamut means more
colourfulness; images become more vivid.
Item
Standard
Standard colour gamut.
Expanded
More vivid colour with expanded colour gamut.
NOTE
• This function is available only when selecting “MOVIE” from
the “AV mode” menu.
Colour temp.
Adjusts the colour temperature to give the best white image.
Item
High White with bluish tone.
Mid-High Intermediate tone between “High” and
“Middle”.
Middle Natural tone.
Mid-Low Intermediate tone between “Middle” and
“Low”.
Low White with reddish tone.
10 point setting* Finely adjusts each colour temperature
between 1 to 10 points.
R/G/B Gain
(LO), R/G/B
Gain (HI)
Adjusts the white balance by changing
the value of each item.
* “10 point setting” is available only when selecting
“STANDARD”, “MOVIE”, “MOVIE THX” or “STANDARD (3D)”,
from the “AV mode” menu.
Motion enhancement
“Motion enhancement” technologies provide superior
solutions for digital display picture quality removing
motion blur (“AquoMotion 800/960”, “AquoMotion
200/240”, “High”, “Low”, “Off”).
NOTE
• This effect is greater on fast moving images.
• This function will have no effect in the following cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred, set to “Off”.
• AquoMotion 800/960 and AquoMotion 200/240 is not
available when “Quattron Pro drive” is activated.
Basic adjustment
LC80LE960X_EN_book.indb 39LC80LE960X_EN_book.indb 39 4/4/2014 1:08:12 PM4/4/2014 1:08:12 PM
40
Game type
Adjusts the images of fast moving video games to be clearer.
Item
Standard
Optimises picture quality for standard
video games.
High motion
Produces a sharp picture from the original
slow-moving picture in a video game.
NOTE
•
It can be used only when AV mode is GAME and input signal is 60Hz.
Gamma adjustment
Selects the tone difference of the brightness and
darkness of the image according to the type of
programme watched from a maximum of e 3 to a
minimum of f 3.
Film mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending on
the vertical frequency), analyses it and then recreates
each still film frame for high-definition picture quality.
Item
Advanced
Adjust effect to reduce judder from film
contents. Select a desired level of judder
reduction from 0 to +10.
Standard Detects, analyses, converts film source.
Off Normal viewing mode.
NOTE
•
Film mode is not selectable depending on the input signal type.
Active contrast
Automatically adjusts the contrast of an image according
to the scene. (“Advanced”, “Standard”, “Off”).
NOTE
•
“Active contrast” is not available in case of 4K input.
DNR (Digital Noise Reduction)
“DNR” produces a clearer image (“Auto”, “High”,
“Middle”, “Low”, “Off”).
NOTE
•
This function may not be available depending on the input signal
type.
Range of OPC
The brightness level range of the OPC sensor’s automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of e 16 and a minimum of f 16.
NOTE
•
The maximum setting cannot be set to a smaller number than
the minimum setting.
•
The minimum setting cannot be set to a bigger number than
the maximum setting.
•
The maximum and minimum settings cannot be set to the
same number.
•
Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
Audio settings
Go to “HOME” > “TV Menu” > “Setup” > “Audio”.
Setup
Bass
Adaptive Volume
Audio
Treble
[Off]
STANDARD
CH list
Menu
Balance
L30 R30
:Back:Enter
: Select
Audio
Adaptive Volume
Adjust volume level automatically to lessen sudden
volume change.
Item
On Adjust the volume gaps.
Off Does not adjust the volume gaps.
Audio
Audio adjustment
You can adjust the sound quality to your preference with
the following settings.
Item c (Cursor) d (Cursor)
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance
Decrease audio
from the right
speaker
Decrease audio
from the left speaker
NOTE
• For resetting all adjustment items to factory preset values,
press a/b to select “Reset”, press ?, press a/b to select
“Yes”, and then press ?.
Basic adjustment
LC80LE960X_EN_book.indb 40LC80LE960X_EN_book.indb 40 4/4/2014 1:08:13 PM4/4/2014 1:08:13 PM
41
Audio
Surround
This function produces a surround effect from the
speakers.
Item
3D Stadium
Reproducing lifelike experience of
excitements such that live sports or
concert performances in a stadium
create.
3D Hall
Reproduces a concert hall experience
with realistic live surround sound based
on reverberant sounds measured in a
concert hall.
3D Movie
Reproduces a movie theatre experience
with realistic live surround sound based
on reverberant sounds measured in a
movie theatre.
3D Standard
Creates three-dimensional surround
sound with detailed control of the signal
phase.
Normal Provides limited surround sound.
Off Outputs normal sound.
Audio
Harmonics enhancer extended
This function improves the sound quality by extending
the selected range.
Item
All range
The low range will be extended and the
sounds in the medium and high ranges,
which have been lost due to the data
being compressed, will be restored. This
setting is effective when playing back
audio through a wireless interface such
as when using Bluetooth playback.
Low range The low range will be extended.
Off No adjustment.
Audio
Clear voice
This function emphasises speech against background
noise for greater clarity.
Audio
Audio description setting (DTV only)
This function allows you to enable output of audio
description if the TV receives a signal including audio
description.
NOTE
• The audio description sound is superimposed on the main
audio when you select a broadcast compatible with audio
description.
•
If you do not clearly hear the sound for the visually impaired,
go to “HOME” > “TV Menu” > “Setup” > “Audio” > “Audio
description setting” > “Mix level”, and select the upper level to
turn up the volume.
• This function is available only for DTV broadcasts. This “Audio
description setting” menu is not displayed for the ATV or the
external inputs.
• The audio description sound is superimposed on the main
audio only when the sound is output on the speaker sound
output, headphone sound output and sound for audio out
output. The sound is not output on the digital audio output
and the HDMI sound output.
• This function is not available for the AQUOS Audio speaker
system.
• This function does not work during USB-recording playback.
Basic adjustment
LC80LE960X_EN_book.indb 41LC80LE960X_EN_book.indb 41 4/4/2014 1:08:13 PM4/4/2014 1:08:13 PM
42
Power save settings
Go to “HOME” > “TV Menu” > “Setup” > “ECO”.
Setup
No signal off
ECO picture control
ECO
Energy save
CH list
Menu
No operation off
[Disable]
[Disable]
[Off]
[On]
:Back:Enter
: Select
NOTE
• You can also select “ECO” by pressing ECO.
ECO
ECO picture control
This function automatically detects the image source and
decreases the power consumption while keeping the
brightness of the image unchanged.
NOTE
• This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)”, “DYNAMIC” or “AUTO”.
• This function does not work when “Energy save” is set to
“Standard” or “Advanced”.
• This function is greyed out in 3D mode.
ECO
Energy save
This function enables you to reduce the backlight
brightness in order to decrease the power consumption
and increase the backlight life span as shown in the
following table.
Item
Standard Reduces the backlight brightness.
Advanced Reduces the backlight brightness more
than “Standard”.
Off
The backlight brightness is the same
value of your settings in the selected “AV
mode”.
When “Energy save” is set to “Standard” or “Advanced”,
“Energy save” status icons appear in the “Picture” menu
and channel information windows.
NOTE
• This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)”.
• This function does not work when “3D brightness boost” is
set to “High” or “Low”.
ECO
No signal off
When set to “Enable”, the TV will automatically enter
standby mode if there is no signal input for 15 minutes.
NOTE
• Even if a TV programme finishes, this function may not
operate because of interference from other TV stations or
other signals.
ECO
No operation off
You can set the TV to automatically power off when no
TV operation is performed for 30 minutes or 3 hours.
NOTE
• “Disable” is the factory preset value.
ECO
Sleep timer
Allows you to set a time when the TV automatically
enters standby mode. You can set the time span for
entering standby mode after selecting “Change”.
0 hr.30 min. 1 hr.00 min.
2 hr.30 min.
1 hr.30 min.
2 hr.00 min.
Off
NOTE
• Select “Off” to cancel the sleep timer.
• When the time has been set, countdown automatically starts.
• Five minutes before the preset of time expires, the remaining
time displays each minute.
Basic adjustment
LC80LE960X_EN_book.indb 42LC80LE960X_EN_book.indb 42 4/4/2014 1:08:14 PM4/4/2014 1:08:14 PM
43
Channel settings
Go to “HOME” > “TV Menu” > “Setup” > “View
setting”.
Setup
Network setup
Auto installation
View setting
Channel settings
CH list
Menu
Bluetooth setup
:Back:Enter
: Select
View setting
Auto installation
The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting and reconfigure the settings
after the initial auto installation has been completed.
1Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Auto installation”.
2If you have already set the password, enter it here.
• See page 46 for setting a password.
3Press c/d to select “Yes”, and then press ?.
4Press a/b/c/d to select the desired language,
and then press ?.
• You do not need to do anything during the auto search.
5Press c/d to select “Digital Search” or “Analogue
Search”, and then press ?.
• When the country setting is set to “Australia”, only
“Digital Search” is available.
NOTE
• You cannot set the HOME/STORE setting and the country
setting in “Auto installation” in the “Setup” menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing “Reset” from the “Setup” menu.
• The current country setting is displayed on the screen.
• In the setting of some country, selecting of “Digital Search” or
“Analogue Search” may not be shown.
View setting
Programme setup
You can run the auto search procedure again at any time
by accessing the “Setup” menu and “Programme setup”.
Channels can be tuned automatically or manually.
Digital setting (DTV only)
You can reconfigure the DTV channel settings
automatically or manually.
1
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Channel settings” > “Programme
setup”.
2If you have already set the password, enter it here.
• See page 46 for setting a password.
3The “Digital setting” screen displays, and then
press ?.
4Press a/b to select the desired menu item, and
then press ?.
5Press c/d to select “Yes”, and then press ?.
Additional search
Use this menu to add new services automatically after
“Auto installation” has been completed.
• Start searching channels after selecting the colour system
and sound system.
Manual search
Add new services within a specified frequency band.
• Enter the frequency using 0–9 numeric buttons.
Manual adjust
Configure various settings for each service using the
Colour (R/G/Y/B) buttons.
Service
No.
Lock
Service
Name
Lock CH
skip
Old
LCN
CH skip SortDelete
1Press a/b to select the desired service.
2Press the Colour button on the remote control
unit corresponding with the item you want to
reconfigure.
• The mark indicates the operation is set to on. Each
time the Colour button is pressed, you can switch the
corresponding operation on/off.
Basic adjustment
LC80LE960X_EN_book.indb 43LC80LE960X_EN_book.indb 43 4/4/2014 1:08:15 PM4/4/2014 1:08:15 PM
44
Basic adjustment
Buttons for “Manual adjust” operation
Lock Press R button.
When the service is locked, you must enter your password
whenever you tune to the service.
CH skip Press G button.
Services with a ✔ mark are passed over when pressing
CHr/s on the TV or remote control unit.
Delete Press Y button.
The selected service is deleted. If you want to watch the
service you deleted once again, perform “Auto installation”,
“Additional search”, or “Manual search”.
Sort Press B button.
The item position of services can be sorted.
1Press a/b to select the service whose item position
you want to move, and then press ?.
2Press a/b to move it to the desired position, and then
press ?.
3Repeat steps 1 and 2 until all desired service items are
sorted.
Analogue setting
1Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Channel settings” > “Programme
setup”.
2If you have already set the password, enter it here.
• See page 46 for setting a password.
3The “Analogue setting” screen displays, and then
press ?.
4Repeat steps 4 and 5 in Digital setting.
NOTE
• The “Analogue setting” menu is available only for watching TV
in ATV mode.
Additional search
Use this menu to add new services automatically after
“Analogue Search” in the “Auto installation” menu has
been completed.
• Start searching channels after selecting the colour system
and sound system.
Manual adjust
You can reconfigure the analogue TV channels settings
automatically or manually.
After selecting “Yes” on the screen, press a/b/
c/d to select the channel you want to set and
then press ?.
Programme Setup “Manual adjust” menu
Next
You can select one of the following settings.
Search
You can add a new channel within a specified frequency band.
Item
Next Search the next channel.
Store Memorise the current display channel.
Cancel Return to the previous screen (the search
result will not be stored).
Fine
You can adjust the frequency to the desired position.
1You can set by directly entering the frequency
number of the channel with 0–9 numeric buttons.
EXAMPLE
• 179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
• 49.25 MHz: Press 4 > 9 > 2 > 5 > ?.
NOTE
• Adjust while checking the background picture as a reference.
• When setting a frequency on the “Fine” screen, the last figure
of the frequency needs to be “0” or “5”.
Colour sys.
Select the optimum colour system to receive (“Auto”,
“PAL”, “SECAM”, “NTSC3.58”).
Sound sys.
Select the optimum sound systems (broadcasting
systems) to receive (“B/G”, “D/K”, “I”, “M”).
NOTE
• Check the sound system if the sound output were not
correct.
LC80LE960X_EN_book.indb 44LC80LE960X_EN_book.indb 44 4/4/2014 1:08:16 PM4/4/2014 1:08:16 PM
45
Label
When a TV channel sends its network name, the “Auto
installation” detects the information and assigns a
name to it. However, you can change channel names
individually.
Select each character of the new name for the
channel with using the software keyboard (see
page 17).
NOTE
• The name can be five characters or less. Select “Cancel” to
set the channel name.
Skip
Channels with “Skip” set to “On” are passed over when
using CHr/s even if selected while watching the
image from the TV.
Lock
You can block the viewing of any channel.
NOTE
• See page 46 for setting a password.
• When “Lock” is set to “On” for a channel, “Child lock has
been activated” displays, and the image and sound of the
channel are blocked.
• When pressing C while “Child lock has been
activated” displays, the password input window will display.
Inputting the correct password unlocks the “Password”
temporarily until the power is turned off.
Sort
Channel positions can be sorted freely.
1Press c/d to select “Yes”, and then press ?.
2Press a/b/c/d to select the channel you want
to move, and then press ?.
3Press a/b/c/d to move it to the desired
position, and then press ?.
4Repeat steps 2 and 3 until all desired channels are
sorted.
Erase programme
Channels can be erased individually.
1Press c/d to select “Yes”, and then press ?.
2Press a/b/c/d to select the channel you want
to erase, and then press ?.
• A message window pops up.
3Press c/d to select “Yes”, and then press ?
to erase the selected channel. All the subsequent
channels move up.
4Repeat steps 2 and 3 until all desired channels are
erased.
Basic adjustment Useful viewing functions
TV Start-up time setting
Option
Quick start
You can reduce the TV’s start-up time after turning on
the power with the remote control unit.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Quick start”.
Item
On
The TV quickly starts up from standby.
23W or more of power consumption is
required during standby. If you connect
additional peripherals eg. USB / HDMI,
the power consumption could rise to
50W.
On (Wallpaper) The TV enters wallpaper mode when in
standby condition.
Off Power consumption is small during
standby.
LC80LE960X_EN_book.indb 45LC80LE960X_EN_book.indb 45 4/4/2014 1:08:16 PM4/4/2014 1:08:16 PM
46
Individual setting – Password
View setting
Password
Allows you to use a password to protect certain settings
from being accidentally changed.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Password”.
ESetting a password
Register a four-digit password number to use the
“Password” function.
1If you already set the password, enter it here.
2Press c/d to select “Yes”, and then press ?.
3Enter the four-digit number as a password using
0–9 numeric buttons.
Password
Yes No
Setting Password. You can change or
clear Password
Enter your new password.
Use 4 digits
Enter the password again to confirm
4Enter the same four-digit number as in step 3 to
confirm.
5Press ?.
NOTE
• To view a locked channel, you must enter the password (see
page 45 for locking channels password). When you select a
locked channel, a password prompt message pops up. Press
C to display the password input window.
EDeleting the password
Allows you to reset your password.
1Enter the password.
2Press c/d to select “No”, and then press ?.
3Press c/d to select “Yes”, and then press ?.
Password
Yes No
Delete password?
NOTE
• As a precautionary measure, make a note of your
password on page 96, cut it out and keep it in a safe
place that children cannot reach.
• This function is only available for TV input mode.
• To relock a channel which has been temporarily unlocked by
inputting the correct password, turn power off and then on
again.
View setting
Parental rating (DTV only)
This function allows DTV services to be restricted. It
prevents children from watching violent or sexual scenes
that may be harmful.
1Go to “HOME” > “TV Menu” > “Setup” > “View
setting” >“Individual setting” > “Parental rating”.
• Repeat steps 1 to 5 in Setting a password to the left.
Selected item Description
None Cancel the blocking.
Age xx years
Select desired age to block.
(Example) If age 14 is selected,
programmes rated for ages of 15 or
more are blocked.
General and
above (G) Content is not offensive to most viewers.
Parental
guidance and
above (PG)
Content is such that parents may
not want their children to view the
programme.
Mature and
above (M)
Mature audience only. This programme
is specifically designed to be viewed by
adults and therefore may be unsuitable
for children under 15.
Mature adult
and above (MA)
Mature adult only. This programme is
specifically designed to be viewed by
adults and therefore may be unsuitable
for children under 15.
Adult violence
and above (AV)
Not for children under age 15. Strong
elements of sex and/or violence.
Restricted and
above (R)
Not for children under age 18. Strong
elements of sex and/or violence.
Useful viewing functions
LC80LE960X_EN_book.indb 46LC80LE960X_EN_book.indb 46 4/4/2014 1:08:16 PM4/4/2014 1:08:16 PM
47
Individual setting – Time
View setting
Clock setup
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Clock setup”.
Time adjustment
This function allows you to set the clock manually.
NOTE
• If you select “No”, the TV will try to get the time for the
broadcast.
Time display
This function allows you to display the clock time in the
lower-right corner of the screen.
Item
On Displays the clock time.
On (half-hourly) Displays the clock time in 30-minute
increments.
Off Hides the clock time.
NOTE
• Time information is available when channel time information
including the teletext information is obtained in the “TV”
mode.
Time format
You can select the time format (either “24HR” or “AM/
PM”) for the clock time.
NOTE
• The displayed time may differ depending on the programmes
because of the programme information.
Clock type
You can select the clock type (either “Digital” or
“Analogue”).
View setting
Time zone (DTV only)
This function enables you to select your local time zone.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Time zone”.
NOTE
• This function lets you select the right time zone in case the
time displayed in the EPG does not match the local time of
your area.
• When the country setting is set to “Australia” or “Indonesia”,
this function is available. When the country setting is set to
“another country”, this function is not available.
• Time zone differ depending on the selected country.
• When the manual clock is set up with “Time adjustment”, this
function is not available.
Individual setting – Language
View setting
Digital audio language (DTV only)
Set up to three preferred multi audio languages to
display if the audio languages are available.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Digital audio
language”.
ESwitching the multi audio languages
Each time you press MPX on the remote control unit, the
audio language switches.
NOTE
• This function depends on audio language information from
broadcasters.
• If audio for the selected language is not included in a received
broadcast, audio will not be output for that language.
View setting
Subtitle (DTV only)
Set up to two preferred subtitle languages (including
subtitles for the hearing impaired) to display if subtitles
are available.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Subtitle”.
Selectable items
E1st language
E2nd language
EFor hearing impaired
ESwitching subtitle languages
Each time you press [ on the remote control unit, the
subtitle switches.
Off 1st language
2nd language
ESet “For hearing impaired” to “Yes”
Subtitles for the hearing impaired have priority over each
of the subtitle language settings (e.g., “1st language”,
“2nd language”, etc.).
EXAMPLE
1st language
(For hearing impaired)
1st language
NOTE
• Subtitles will not be displayed when the programme does not
contain subtitle information.
• Subtitles may not be displayed in 3D mode.
View setting
Language
You can select an OSD language. Refer to the OSD
language column in the specification table for the
selectable languages (Page 90).
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Language”.
Useful viewing functions
LC80LE960X_EN_book.indb 47LC80LE960X_EN_book.indb 47 4/4/2014 1:08:17 PM4/4/2014 1:08:17 PM
48
Optional features settings
Go to “HOME” > “TV Menu” > “Setup” > “Option”.
Setup
Option for view
Option
3D setup
CH list
Menu
Terminal setting
EPG setup
:Back:Enter
: Select
Selecting the picture size manually
Option
Wide mode
You can select the picture size. Selectable picture size
varies with the type of signal received.
1Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Option for view” > “Wide mode”.
• You can also select an item by pressing WIDE on the
remote control unit.
• The menu lists the “Wide mode” options selectable for
the type of video signal currently received.
2Press a/b to select the desired item.
• As you toggle the options, each is immediately reflected
on the screen. There is no need to press ?.
Item (for SD [Standard-Definition] signals)
Normal Keeps the original aspect ratio in a full
screen display.
Zoom 14:9
For 14:9 letterbox pictures. A thin side
bar appears on each side, and you may
also see bars on the top and bottom
with some programmes.
Panorama
In this mode, the picture is stretched
toward each side of the screen. The
picture may appear similar to “Full”
depending on broadcast signals.
Full For 16:9 squeeze pictures.
Cinema 16:9
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Cinema 14:9
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Original Keeps the original resolution, do not
expand.
Item (for HD [High-Definition] signals)
Full Displays with an overscan image. Crops
all sides of screen.
Underscan
Displays with an underscan image only
when receiving a 720p/2160p signal.
Displays with the High-Definition image
adjusted optimally. Noise may appear
on the edge of the screen with some
programmes.
Dot by Dot
Displays an image with the same number
of pixels on the screen when receiving
1080i/1080p signals only.
NOTE
• “Zoom 14:9” and “Cinema 14:9” will appear only for TV
mode.
• Some items do not appear depending on the type of received
signal.
• Refer to page 71 for PC signals inputs.
• The Wide mode is fixed to “Underscan” when 4K signal is
input.
Selecting the picture size
automatically
Option
Auto wide (DTV only)
The “Auto wide” allows the TV to switch automatically
among the different picture size.
Go to “HOME” > “TV Menu” > “Setup” >
“Option” > “Auto wide”.
NOTE
• Use “Wide mode” if an image does not switch to the
appropriate picture size. When the broadcast signal contains
no aspect ratio information, the function will not work even if
enabled.
• This function is available for 3D images converted from 2D
images or normal 2D images.
Useful viewing functions
LC80LE960X_EN_book.indb 48LC80LE960X_EN_book.indb 48 4/4/2014 1:08:18 PM4/4/2014 1:08:18 PM
49
Option
4:3 mode (DTV only)
The 4:3 mode allows you to select between “Full” and
“Normal”.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “4:3 mode”.
Item
Full Wide image without side bars.
Normal Normal range keeping 4:3 or 16:9 aspect
ratio.
4:3 screen types
4:3 mode “Full” 4:3 mode “Normal”
Setting audio input
Option
Digital audio output
This function allows you to select the digital audio signal
type.
Go to “HOME” > “TV Menu” > “Setup” >
“Option” > “Terminal setting” > “Digital audio
output”.
Item
PCM To stereo audio system
Bitstream To multi-channel Dolby Digital, DTS
audio system
Option
Audio select
When using the PC terminal or HDMI2 terminal, you
must select which terminal uses the AUDIO IN jack for
analogue audio input.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Terminal setting” > “Audio select”.
When selecting “HDMI2” from the “INPUT” menu
Item
HDMI
When connecting devices (including a
PC) with a HDMI cable to the HDMI2
terminal.
HDMI +
Analogue
When connecting devices (including a
PC) with a DVI/HDMI cable to the HDMI2
terminal and inputting analogue audio
signals from the AUDIO IN jack.
When selecting “PC” from the “INPUT” menu
Item
Video
When connecting devices with AV cable
to the PC terminal, display images
without audio.
Video + Audio
When connecting a PC to the PC
terminal, and inputting analogue audio
signals from the AUDIO IN jack.
Skipping specified inputs
Option
Input skip
This setting allows you to skip the inputs on the input
source selection operation.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Terminal setting” > “Input skip”.
NOTE
• If you connect external equipment to an HDMI terminal which
you have set to be skipped, a notification message appears
on the display when a signal is received from the connected
external equipment. Press “?” to reset the related skipping
setting so that the input terminal becomes available.
Option
Input select
For setting the signal type of external equipment.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Terminal setting” > “Input select”.
Input source Selectable item
Input 6 AUTO, COMPONENT, VIDEO
Useful viewing functions
LC80LE960X_EN_book.indb 49LC80LE960X_EN_book.indb 49 4/4/2014 1:08:18 PM4/4/2014 1:08:18 PM
50
Option
Input label
You can label each input source with a custom
description.
1Press b to select the desired input source from
the “INPUT” menu, and then press ?.
2Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Terminal setting” > “Input label”.
3Press ? to display the software keyboard and
select each character of the new name for the
input source (page 17).
4Repeat the above until the name is fully spelt out,
and then press @.
• The label can be six characters or less.
• When you want to set an input source name of less than
six characters, select “Cancel”.
TV
HDMI 2
INPUT
Switchable
CH list
ATV DTV
NOTE
• You cannot change labels if the input source is “TV”,
“Multimedia” or “Home network”.
Selecting the HDMI picture size
automatically
Option
HDMI auto view
This function allows you to automatically change to the
appropriate picture size when viewing an HDMI signal
using the HDMI1, 2, 3 and 4 terminals.
1Press b to select the input source (“HDMI1”,
“HDMI2”, “HDMI3” or “HDMI4”) connected to your
HDMI device, and then press ?.
2Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Terminal setting” > “HDMI auto view”.
Item
Enable/Disable
Set whether or not to use “Wide mode”
based on signal recognition, including an
HDMI signal.
NOTE
• Refer to your external equipment operation manual for the
above settings.
• When connecting a DVI-HDMI conversion adaptor/cable to
the HDMI terminal, the image may not come in clearly.
Option
Headphone/Audio out select
You can select which device is used for outputting audio.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Terminal setting” > “Headphone/Audio out
select”.
Item
Headphone Output audio through headphones.
Audio out Output audio through an A/V receiver or
surround audio controller.
Regarding the headphone jack
• Use headphones with a stereo mini plug ( 3.5 mm).
• Be sure to unplug headphones from the jack when they
are not in use.
• The speakers do not output volume when headphones
are plugged in.
• The “Audio” menu cannot be operated when headphones
are plugged in.
• You can set the volume to different levels for each input
source.
Volume display when headphones are plugged in
30
CAUTION
• This terminal is also used for headphones. Reduce the
volume before using headphones. Overwhelming sound may
damage your hearing.
NOTE
• If you select “Audio out” when a cable is inserted in the
AUDIO IN terminal, the TV speakers are muted.
• When you select “Audio out”, you can adjust the TV sound
volume with the Yl/k buttons on the TV or the remote
control unit.
Useful viewing functions
LC80LE960X_EN_book.indb 50LC80LE960X_EN_book.indb 50 4/4/2014 1:08:19 PM4/4/2014 1:08:19 PM
51
Option
Headphone out setting
You can select the headphone/speaker audio output
when using the headphones.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Terminal setting” > “Headphone out setting”.
Item
Headphone Audio output from headphones only.
Dual Audio output from headphones and
speakers.
NOTE
• This function does not work when “Change audio output
device” (Page 35) is set to “By AQUOS audio SP” or
“Headphone/Audio out select” is set to “Audio out”.
• Regarding the volume adjustment when “Dual” is set:
− Adjust the speaker volume with the Y +/– on the
remote control unit.
− Adjust the headphone volume with the Y +/– on the
TV.
− The headphone volume is not muted even by pressing
e (Mute) on the remote control unit.
• When not using the headphones:
− Audio outputs from the speakers regardless of the
settings.
Option
Colour system (ATV only)
You can change the colour system to one that is
compatible with the image on the screen.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Colour system”.
NOTE
• The factory preset value is “Auto”.
• If “Auto” is selected, the colour system for each channel is
automatically set. If an image does not display clearly, select
another colour system (e.g., “PAL”, “SECAM”).
Option
Channel selecting effect
This function shows a screen effect when choosing or
changing channels.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Screen effect” > “Channel selecting effect”.
Option
Programme title display (DTV only)
This function allows you to display programme
information such as the title and airtime by tuning a
channel.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Screen effect” > “Programme title display”.
NOTE
• This function is available only when the DTV mode is selected.
Adjusting image position
Option
Position
For adjusting a picture’s horizontal and vertical position.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Screen effect” > “Position”.
Item
H-Pos. Centres the image by moving it to the left
or right.
V-Pos. Centres the image by moving it up or
down.
NOTE
• For resetting all adjustment items to the factory preset values,
press a/b to select “Reset”, and then press ?.
• Adjustments are stored separately for each input source.
• Depending on the input signal type, “Wide mode” setting or
“Video mode” for the Multimedia mode, a position setting
may not be available.
• Images may not be displayed properly depending on the
settings and/or signals.
• This function is available for 3D images converted from 2D
images or normal 2D images.
Additional features
LC-70/60LE960X only
Option
Illumination
This function makes the LED on the front of TV
illuminated in several ways.
Go to “HOME” > “TV Menu” > “Setup” >
“Option” > “Illumination”.
Useful viewing functions
LC80LE960X_EN_book.indb 51LC80LE960X_EN_book.indb 51 4/4/2014 1:08:20 PM4/4/2014 1:08:20 PM
52
Option
Wallpaper setting
This function is available only when “Quick start” is set to
“On (Wallpaper)”.
Activating the function will display still images when the
TV is in standby mode.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Wallpaper setting”.
Data source
For the wallpaper, you can select either the still images
pre-installed in the TV or your favourite still images stored
in the USB device or SD/SDHC memory card.
Item
Pre-installed
The images pre-installed in the TV will be
displayed in a slideshow.
SD/USB
Images stored for the wallpaper will appear.
If only a single still image is stored in
the USB device or SD/SDHC memory
card, that image will be displayed as the
wallpaper. When there are multiple still
images in the memory, all the images will
be displayed in a slideshow.
NOTE
• Images are displayed as a slideshow in 3-minute intervals.
• As a USB device or SD/SDHC memory card cannot be
detected immediately after the TV is turned on from standby
mode, the wallpaper pre-installed in the TV may be displayed
even when “Data source” is set to “SD/USB”. To display the
SD/USB Wallpaper, turn on the power and wait 10 seconds
before turning off the power.
• When in the wallpaper function, do not perform any OAD
operations or EPG searches.
• A timer set for recording or watching a programme will take
priority 2 minutes before the programme starts.
EWhen you display images by using the USB
device or SD/SDHC memory card
• Create a folder named “WP” in the root directory of the USB
device or SD/SDHC memory card (the first directory when
the USB device or SD/SDHC memory card is opened), and
store into the folder the still images you want to display for the
wallpaper.
• You must insert the USB device or SD/SDHC memory card
into the TV before turning off the TV.
• If there are images on the USB device or SD/SDHC memory
card but they do not appear on the screen, switch to SD/USB
mode and check whether the image files on the USB device
or SD/SDHC memory card are shown correctly.
Useful viewing functions
Timer setting
You can set the length of time the TV will remain in the
Wallpaper mode (3 hours/6 hours/12 hours/24 hours).
NOTE
• Setting “Quick start” to “On” consumes more power.
• No buttons except for a work even while the still images are
being displayed.
• If the ready-for-use USB device or SD/SDHC memory card
is not inserted, the still images pre-installed in the TV will be
displayed in a slideshow even when “Data source” is set to
“SD/USB”.
• The still images will be displayed until the set time has
elapsed.
• If you do not want to use the wallpaper as described above,
set “Quick start” to “On” or “Off”.
Option
Boot picture
With this function activated, the SHARP logo will be
displayed when you turn on the TV.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Boot picture”.
NOTE
•
This function is not available when the “Quick start” is set to “On”.
Option
Game play time
This function allows you to display the elapsed time on
the screen when “AV mode” is set to “GAME”.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Game play time”.
Item
On
Under connecting a game console to
the TV, the elapsed time is displayed
in 30-minute increments after you start
playing a game.
Off Hides the time.
NOTE
• This function is displayed in the external input mode.
• This function is reset after performing the following
operations:
1. When toggling the input.
2. When changing “AV mode”.
LC80LE960X_EN_book.indb 52LC80LE960X_EN_book.indb 52 4/4/2014 1:08:21 PM4/4/2014 1:08:21 PM
53
Option
Key lock
This function allows you to lock the buttons on the TV
or remote control unit in order to prohibit children from
changing the channel or volume.
Go to “Home” > “TV Menu” > “Setup” > “Option”
> “Key lock”.
Item
Off Unlocks the buttons.
RC control lock Locks all buttons on the remote control
unit.
Button control
lock
Locks the buttons on the TV except the
power switch.
NOTE
• You cannot set both “RC control lock” and “Button control
lock” at the same time.
ECancelling the lock
Press @ on the TV and set to “Off” to cancel the
“RC control lock”. Press @ on the remote control
unit and set to “Off” to cancel the “Button control lock”.
NOTE
• See page 19 for the functions of the TV control panel buttons.
• To cancel “Button control lock”, use the remote control.
Bluetooth setup
Set this function when using the Bluetooth devices with
your TV.
It is possible to connect 3D glasses, a keyboard, mouse,
tablet and smartphone.
NOTE
• When you use the Bluetooth device with your TV for the first
time, you must make pairing between the device and the TV.
Once the pairing is correctly carried out, the Bluetooth device
will be registered on the TV.
Bluetooth devices
You can add, delete or select Bluetooth devices. If you
connect a tablet or smartphone to the TV by Bluetooth,
you can listen its sound through the TV.
EAddition of a Bluetooth device
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Bluetooth setup” > “Pairing new
device”.
You can connect 3 kinds of Bluetooth devices listed below:
−Keyboard device
−Mouse device
−Audio input device
Connection / Selection Procedure
1Press a/b to select the device you want to
connect.
2Press c/d to select “Search”, and then press
?.
3Model names of the detected devices will be
displayed.
4Select the device with the message “New”, and
then press ?.
5Wait the message indicating “Pairing completed”,
and then press ?.
Before connecting the devices, press the connect button
on the Bluetooth device you want to connect.
−Keyboard device: When pairing operation between
keyboard and TV is completed, enter the PIN code by
using the keyboard device.
−Mouse device: When pairing operation between mouse
and TV is completed, the name will be displayed, then
press ?.
−Audio input device:
1. Change input source to Bluetooth by pressing b on
the remote control unit.
2. In Bluetooth device (smartphone/tablet) enable Bluetooth
function. The device starts to search Bluetooth standby
TV.
3. TV name will be shown in Bluetooth device, then select
it.
NOTE
• See also the instruction manual supplied with the Bluetooth
device.
• You can register up to 6 devices to the TV, but only one
keyboard, mouse, audio output and audio input device can
be used at a time.
• If a device for which “Selected” is displayed does not operate
properly, try searching and selecting the device again.
• The keyboard or mouse may not operate properly depending
on the application being used.
• The Bluetooth device may not operate properly depending on
the device being used.
Useful viewing functions
LC80LE960X_EN_book.indb 53LC80LE960X_EN_book.indb 53 4/4/2014 1:08:22 PM4/4/2014 1:08:22 PM
54
Miracast setup
By Miracast technology you can enjoy the contents of
Miracast compatible smartphone or tablet to this TV.
Using the Miracast device
When you connect a device such as a Miracast
compatible smartphone or tablet to this TV, you can
enjoy video and audio from the device on the TV’s
large screen and speakers.
1Switch the TV input to “Miracast”.
2Enable the Miracast function on the Miracast
device and connect to the TV.
(The TV changes according to the behavior of the
device).
NOTE
•
When the TV is turned off or the connection is ended on the
device, you must connect the device again.
•
When connecting using a PIN code, first select the
corresponding menu on the “Miracast” menu, and then perform
the operations from step 1.
•
If you want to specify the preferred band to use with this
function, select the corresponding menu on the “Miracast” menu.
•
For details about the operation of the Miracast compatible
device, check the manual for that device.
•
The Miracast function may not operate properly depending on
the device being used.
Connection mode setting
Miracast function has two connection modes:
“PUSH Button Mode” and “PIN Code Mode”. User can
select connection method in TV menu.
When the connection is made, device screen will be
displayed in the TV.
EPUSH Button Mode
1Change input source to Miracast by pressing b
on the remote control unit.
2In Miracast device (smartphone/tablet) enable
Miracast function.
The device starts to search for the TV with
Miracast in standby mode.
3TV name will be shown, then select it.
When the connection is made, device screen will be
displayed in the TV.
EPIN Code Mode
1Change input source to Miracast by pressing b
on the remote control unit.
2In Miracast device (smartphone/tablet) enable
Miracast function. The device starts to search for
the TV with Miracast in standby mode.
3TV name and PIN code will be shown (PIN code is
created randomly.)
Enter the PIN code displayed on the TV.
When the connection is made, device screen will be
displayed in the TV.
Failed connection
If connection is not established, the next message
will appear:
“Connection failed”
Please repeat procedure “Connection mode setting”.
Wireless Channel Setting
Configures Wireless Channel Setting.
NOTE
• Depending on the connected device, different channels may
be assigned.
•
You can use the Wireless Channel setting to specify the preferred
channel. Select “Auto” to select the optimum channel for the
usage conditions.
Useful viewing functions
LC80LE960X_EN_book.indb 54LC80LE960X_EN_book.indb 54 4/4/2014 1:08:22 PM4/4/2014 1:08:22 PM
55
Playing Back Files from a Portable
Device or PC
With the remote playback function, you can use your
portable device to playback pictures, video and music on
the home network server.
• The TV has obtained DLNA’s Digital Media Renderer (DMR)
certification.
• To use the remote playback function, your portable device or
PC must be a DLNA Certified Digital Media Controller.
• Please ensure that the TV and portable device or PC are in
the same network environment, and set portable device as
the server of TV.
For the network setting of TV, please refer to pages 55 – 57.
Easy share setting
1Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Network setup” > “Easy share setting”.
2Press a/b to select the item to be adjusted, and
then press ? to set.
ESet easy share permission
Before this function can be used, you need to set the TV
to the status of being able to receive contents.
Item
On Receiving and playing contents from
portable device or PC are allowed.
Off Receiving contents from portable device
or PC is not allowed.
ETime out setting
This sets the time until the TV returns automatically to TV
mode after remote playback ends.
Item
10 sec./60 sec.
When the set time has elapsed after
remote playback ends, the TV returns
automatically to TV mode.
No Select this to manually switch the TV
after remote playback ends.
NOTE
• This function may not work while an Internet application is
being used.
• Due to reasons including network environment, it may take
some time for the TV to start playing after the dragging
operation.
• If the wireless signals are too complicated, or multiple wireless
access points are available, operations may not be performed
properly due to signal interference.
• Some file formats may not match. For the file formats
supported by this function, please see Home network
server compatibility on page 70.
Device name setting
You can set up the name of this TV for displaying on
external devices.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Network setup” > “Device name
setting”.
Connecting to the network
To enjoy internet services, you need to connect the
TV to a router with a high speed connection to the
internet. You can also connect the TV to your Home
network server through a router or access point. The TV
connection to the router can either be wired or wireless.
NOTE
• If you choose a wired connection to the router, you need an
ETHERNET cable (commercially available).
• If you do not have a broadband internet connection, consult
the store where you purchased your TV or ask your internet
service provider or telephone company.
• An ETHERNET and wireless connection cannot be used at
the same time. Use only one of the connection types.
• A stable connection speed is required to play back streaming
content, otherwise you may not be able to watch normally.
Wired installation
Use an ETHERNET cable to connect the ETHERNET
terminal on the TV to your broadcast router as shown
below. This is recommended when enjoying services
which require stable connection speeds, such as
streaming media.
EWired connection overview
PC (home network server)
Router (commercially available)
ETHERNET cable (commercially available)
Network
Network function
LC80LE960X_EN_book.indb 55LC80LE960X_EN_book.indb 55 4/4/2014 1:08:22 PM4/4/2014 1:08:22 PM
56
EHow to connect
Router ETHERNET terminal
LAN
n
ETHERNET cable (commercially available)
1Switch on the router (commercially available).
Refer to the router’s operation manual for
switching on.
2Connect the ETHERNET terminal on the TV to the
router (commercially available) with an ETHERNET
cable (commercially available).
When using Easy setup function
ERefer to “How to connect”.
3Go to “HOME” > “TV Menu” > “Setup” >
“View setting” > “Network setup” > “LAN setting”
> “Easy setup”.
4Press c/d to select “Yes”, and then press ?.
5Press a/b to select “Wired”, and then press ?.
6Please input according to direction of a screen,
and finally input “Complete”.
When using Manual setup function
ERefer to “How to connect”.
3Go to “HOME” > “TV Menu” > “Setup” >
“View setting” > “Network setup” > “LAN setting”
> “Manual setup” > select “Yes” > “Connection
type”.
4Press c/d to select “Wired”, and then press ?.
5Select “OK” to confirm.
• The wired connection will be automatically established.
• If you have failed to connect to the internet in the above
operation, an error message will appear. In this case,
press b to return to the normal TV screen and check
the relevant settings.
NOTE
• To change the settings manually, go to “HOME” >
“Network setup” > “IP setup” and follow the on-screen
instructions and the operation manual of the router.
Setting Ethernet info.
[Current setup]
: Auto
: Auto
: Auto
: Auto
: xx:xx:xx:xx:xx:xx
IP address
Netmask
Gateway
DNS
MAC address
IP setup
Wireless setup
Connection type
TV
Change Initialize
Wireless installation
This TV is equipped with a wireless LAN function.
EWireless connection overview
PC (home network server)
Wireless LAN router/access point
Wireless LAN LCD TV
Network
NOTE
• When using the SHARP wireless LCD TV, try to provide as
much free space around the device for best performance.
• A wireless LAN connection and performance cannot be
guaranteed for all residential environments. In the following
cases, the wireless LAN signal may be poor or drop, or the
connection speed may become slower.
fWhen used in buildings made with concrete, reinforced
steel, or metal
fWhen placed near objects that obstruct the signal
fWhen used with other wireless devices that emit the same
frequency
fWhen used in the vicinity of microwave ovens and other
devices that emit a magnetic field, electrostatic charge, or
electromagnetic interference
• Make sure the firewalls in your network allows access to the
TV wireless connection.
• Operations cannot be guaranteed when used with access
points that do not have Wi-Fi® certification.
• A wireless LAN access point is required to connect the TV to
the Internet using a wireless LAN. See the operation manual
of your access point for setup.
• A stable connection speed is required to play back streaming
content. Use an ETHERNET connection if the wireless LAN
speed is unstable.
• Before transferring to a third party or disposal, be sure to
initialise the wireless LAN settings.
E How to connect
1Switch on your router before starting the network
installation.
When using Easy setup function
ERefer to “How to connect”.
2Go to “HOME” > “TV Menu” > “Setup” >
“View setting” > “Network setup” > “LAN setting”
> “Easy setup”.
3Press c/d to select “Yes”, and then press ?.
4Press a/b to select “Wireless”, and then press
?.
5Please input according to direction of a screen,
and finally input “Complete”.
Network function
LC80LE960X_EN_book.indb 56LC80LE960X_EN_book.indb 56 4/4/2014 1:08:22 PM4/4/2014 1:08:22 PM
57
When using Manual setup function
ERefer to “How to connect”.
2Go to “HOME” > “TV Menu” > “Setup” >
“View setting” > “Network setup” > “LAN setting”
> “Manual setup” > select “Yes” > “Connection
type”.
3Press c/d to select “Wireless”, and then press
?.
4Select “OK” to confirm.
5Press a/b to select “Wireless setup”, and then
press ?.
6Press c/d to select “Change”, and then press
?.
7Press a/b to select “WPS push button”, and
then press ?.
WPS push button
WPS PIN code
Selecting wireless network
Registering wireless network
• To establish the connection manually, select “WPS
PIN code”. Follow the on-screen instructions and the
operation manual of the router/access point.
8Select “Next” to proceed.
9Press the WPS button on the router/access point.
When you press the WPS button, a progress
bar will appear on the display. Wait until the
connection is established.
0
Select “OK” when the connection details are
displayed.
• If you have failed to connect to the internet in the above
operation, an error message will appear. In this case,
press b to return to the normal TV screen and check
the relevant settings.
NOTE
• To connect your TV to the internet, you must have a
broadband internet connection.
• There is no need to enter the security key for subsequent
connections to the wireless network.
• If your access point is set to a stealth mode (that prevents
detection by other devices), you may not be able to establish
a connection. In this case, disable the stealth mode on the
access point.
• If you want to change the IP settings manually, go to “HOME”
> “Network setup” > “IP setup” and follow the on-screen
instructions and the operation manual of the router.
• See page 58 to check the wireless LAN specifications.
Network function
LC80LE960X_EN_book.indb 57LC80LE960X_EN_book.indb 57 4/4/2014 1:08:22 PM4/4/2014 1:08:22 PM
58
Network function
Specifications (Wireless LAN)
Standard IEEE 802.11a/b/g/n
Frequency band 2412f2484 MHz
5150f5850 MHz
Security Static WEP (64/128 bit, key index 1 only)
WPA-PSK (TKIP)
WPA2-PSK (AES)
Modulation DBPSK@1 Mbps
DQPSK@2 Mbps
CCK@5.5/11 Mbps
BPSK@6/9 Mbps
QPSK@12/18 Mbps
16-QAM@24 Mbps
64-QAM@48/54 Mbps
Specifications (Bluetooth)
Ver. name Bluetooth v3.0
Profile name A2DP – SNK/SRC, HID
NOTE
• This TV has received the following certifications:
f Wi-Fi CERTIFIED™ (certification programme from the Wi-Fi Alliance®)
f Wi-Fi Protected Setup™ (certification programme from the Wi-Fi Alliance®)
• A wireless LAN connection and performance cannot be guaranteed for all residential enviroments in the following cases, the
wireless LAN signal may be poor or drop, or the connection speed may become slower.
− When used in buildings made with concrete, reinforced steel, or metal
− When placed near objects that obstruct the signal
− When used with other wireless devices that emit the same frecuency
− When used in the vicinity of microwave ovens and other devices that emit a magnetic field, electrostatic charge, or
electromagnetic interference
• When there is significant interference in the 2.4 GHz frequency (such as from other wireless LAN devices, Bluetooth® devices,
2.4 GHz cordless telephones, and microwave ovens), it is recommended that you use a wireless LAN access point that supports
IEEE802.11a/n (5 GHz) and set the access point to transmit at 5 GHz. For setup details, see the operation manual of your access
point.
• Before transferring to a third party or disposal, be sure to initialise the wireless LAN settings.
• Wireless LAN supports WEP64, WEP128, TKIP and AES encryptions.
• This TV has a built-in wireless LAN function. Using a separate USB LAN adapter may result in radio communications that do not
comply with regulations on radio communications. Therefore, do not use a separate wireless LAN adapter.
LC80LE960X_EN_book.indb 58LC80LE960X_EN_book.indb 58 4/4/2014 1:08:22 PM4/4/2014 1:08:22 PM
59
Network function
Using AQUOS.NET
By connecting the TV to the Internet, you can enjoy a
variety of broadband content.
1Press HOME to display the “HOME” screen.
2Press a/b/c/d to select “AQUOS.NET” service,
and then press ?.
Network
Setup
Skype
TM
Home netwo
AQUOS.NET
Multimedia
1/7
Menu status
Select recording device
Quick start
No signal off
No operation off
Sleep timer
[USB-HDD]
[Off]
[Disable]
[Disable]
[Off]
: LAN/Storage status : Menu status
: Enter : End
put change
put change
3The screen for AQUOS.NET is displayed.
Example : The image shown below, which is only for
explanation, is subject to change.
P&N (Twin Picture)
• Each time you press WIDE when a browser screen is
shown, the display pattern toggles between a website-
only screen and a TV+Web screen.
NOTE
• Additional applications will be available in the future.
• The delivery speed of applications varies depending on the
network speed. Check the web site of the provider for details
on application setup and other information.
4Press a/b/c/d to select a function, and then
press ?.
Selected item Description
Go back to the previous page.
Go to the next page.
Refresh the page.
Interrupt a page while it is loading.
Switches between virtual mouse
and spatial navigation modes.
Switching modes also switches the
display. Depending on the page
displayed, switching this function
may make it easier to use the
browser.
Opens a search window below the
toolbar. You can use this to search
for a word within the displayed
page.
Displays the Home Page. You can
set the page displayed as your home
page when the browser starts up.
Displays the bookmarks list.
Displays your browsing history.
Configures browser settings such
as your home page and browsing
security.
Zooms the display in or out.
Restrictions apply to window
display.
5Press a/b/c/d to select the “address bar”, and
then press ?.
Example : The image shown below, which is only for
explanation, is subject to change.
Address bar
6The software keyboard will pops up when you
press ?.
After using the software keyboard to input the
“URL”, press ?.
LC80LE960X_EN_book.indb 59LC80LE960X_EN_book.indb 59 4/4/2014 1:08:22 PM4/4/2014 1:08:22 PM
60
Clear browser setting
You can clear browser setting, which includes cookies,
bookmarks and caches.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Clear browser setting”.
NOTE
• Password input is required when executing “Clear browser
setting” if Password is set.
CAUTION
• If you exercise this operation, browser setting will be
completely initialised. If there is important information take
notes before executing.
About links
• Web pages on the Internet often include “links” that allow you
to jump to other web pages (or sites).
• “Links” can take various forms, including words or images,
but they always work in the same way letting you jump to the
link destination when you select them.
• You can jump from a “link” to the corresponding link
destination.
CAUTION
• If the power is cut due to a power failure or the TV being
unplugged while you are using the Internet, information such
as bookmarks or cookies may not be saved correctly.
NOTE
To users who access the Internet from a PC:
• When you access the Internet from this TV, the procedures
may not be the same as regular browser-based access on a
PC.
• You cannot download files nor install programmes.
• Video and audio cannot be played, and text or images may
not be displayed correctly.
• Depending on the data format, some formats may not be
supported.
• As there are lot of formats in the internet, some formats may
not be supported by this TV unit.
Network function
LC80LE960X_EN_book.indb 60LC80LE960X_EN_book.indb 60 4/4/2014 1:08:23 PM4/4/2014 1:08:23 PM
61
Network function
DISCLAIMERS
This Sharp device facilitates the access to content and services provided by third parties. The content and services
accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party
content and services must be in accordance with any authorization or terms of use provided by such content or
service provider. Sharp shall not be liable to you or any third party for your failure to abide by such authorization or
terms of use. Unless otherwise specifically authorized by the applicable content or service provider, all third party
content and services provided are for personal and non-commercial use; you may not modify, copy, distribute,
transmit, display, perform, reproduce, upload, publish, license, create derivative works from, transfer or sell in any
manner or medium any content or services available via this device.
Sharp is not responsible, nor liable, for customer service-related issues related to the third party content or services.
Any questions, comments or service-related inquiries relating to the third party content or service should be made
directly to the applicable content or service provider.
You may not be able to access content or services from the device for a variety of reasons which may be unrelated
to the device itself, including, but not limited to, power failure, other Internet connection, or failure to configure your
device properly. Sharp, its directors, officers, employees, agents, contractors and affiliates shall not be liable to you
or any third party with respect to such failures or maintenance outages, regardless of cause or whether or not it
could have been avoided.
ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU ON AN
“AS-IS” AND “AS AVAILABLE” BASIS AND SHARP AND ITS AFFILIATES MAKE NO WARRANTY OR
REPRESENTATION OF ANY KIND TO YOU, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION,
ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE
OR ANY WARRANTIES OF SUITABILITY, AVAILABILITY, ACCURACY, COMPLETENESS, SECURITY, TITLE,
USEFULNESS, LACK OF NEGLIGENCE OR ERROR-FREE OR UNINTERRUPTED OPERATION OR USE OF THE
CONTENT OR SERVICES PROVIDED TO YOU OR THAT THE CONTENT OR SERVICES WILL MEET YOUR
REQUIREMENTS OR EXPECTATIONS.
SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS OF THIRD
PARTY CONTENT OR SERVICE PROVIDERS, NOR ANY ASPECT OF THE CONTENT OR SERVICE RELATED TO
SUCH THIRD PARTY PROVIDERS.
IN NO EVENT WILL SHARP AND/OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, CONSEQUENTIAL OR OTHER DAMAGES, WHETHER
THE THEORY OF LIABILITY IS BASED ON CONTRACT, TORT, NEGLIGENCE, BREACH OF WARRANTY, STRICT
LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
• This product contains fonts provided by Monotype Imaging Inc.
• Monotype® is a trademark of Monotype Imaging Inc. registered in the United States Patent and Trademark Office
and may be registered in certain jurisdictions.
• Tioga™ is a trademark of Monotype Imaging Inc. and may be registered in certain jurisdictions.
• Letter Gothic™ is a trademark of The Monotype Corp. and may be registered in certain jurisdictions.
• iType® is a trademark of Monotype Imaging Inc. registered in the United States Patent and Trademark Office and
may be registered in certain jurisdictions.
• This product contains the iType® font engine from Monotype Imaging Inc.
http://www.espial.com
LC80LE960X_EN_book.indb 61LC80LE960X_EN_book.indb 61 4/4/2014 1:08:23 PM4/4/2014 1:08:23 PM
62
Other useful features
USB-recording
You can enjoy DTV recording or playback by connecting
a commercially available USB HDD to the TV.
• USB-recording does not work for ATV, external
inputs, data broadcasts, radio broadcasts or
network applications.
Connecting a USB HDD
Connect a commercially available USB HDD to the USB
port of the TV.
• USB storage device: USB HDD.
• Be sure to read the operation manual for the USB HDD.
• At least USB HDDs with memory between 100GB and 2TB
and under are required for USB-recording to register.
• The USB 3 (HDD) port is compatible with portable USB HDD
which can operate with the power supply from the USB port
(bus powered drive).
• Refer to Disconnect the USB HDD when removing the USB
HDD (do not remove the USB HDD during USB-recording
operation).
NOTE
• USB-recording may take a few moments to start after the TV
is turned on.
• This function may not work properly for some USB HDDs.
• Do not connect and disconnect a USB HDD from the TV
repeatedly.
USB HDD registration
It is necessary to first perform USB HDD registration for
USB HDDs used for USB-recording.
Directly connect only one USB HDD to the USB port
while registering the USB HDD (when two or more
USB HDDs are connected, USB HDD registration is
not available).
• The screen prompt pops up.
When the USB HDD is connected to the TV
Register the USB HDD. Follow the on-screen
instructions to register the USB HDD.
All the data on the USB HDD is deleted after USB
HDD regisration.
NOTE
• Only one USB HDD for USB-recording can be registered on
the TV. Two or more USB HDDs for USB-recording cannot be
used at the same time.
• When a USB HDD is registered, formatting may be
performed. In that case, all data will be deleted.
Disconnecting the USB HDD
When you disconnect the USB HDD, be sure to the
following steps.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “USB-REC setting” > “Device removal”.
NOTE
• This menu item cannot be selected when a USB HDD for
USB-recording is not registered.
• The USB HDD registration for USB-recording is cancelled in
the following cases:
− When the USB HDD is removed.
− When another USB HDD is registered for USB-recording;
only one USB HDD can be registered for USB-recording.
LC80LE960X_EN_book.indb 62LC80LE960X_EN_book.indb 62 4/4/2014 1:08:23 PM4/4/2014 1:08:23 PM
63
Other useful features
How to operate USB-recording
You can enjoy DTV recording or playback by connecting a
commercially available USB HDD to the TV.
CAUTION
• Do not unplug the AC cord or turn off the MAIN POWER
switch during USB-recording timer setting or USB-recording.
• When the AC cord is unplugged and the MAIN POWER
switch is turned off:
−The USB-recording timer setting is cancelled.
• USB-recording may be automatically stopped when signal
reception is poor.
• Only this TV can playback the programme recorded on the
USB HDD connected to this TV. The programmes cannot
playback on other TV or PC.
• When a CAM PIN code is required for recording a
programme, it is necessary to enter the CAM PIN code in
advance (Page 15).
SHARP corporation bears no responsibility regarding
compensation for content when recording cannot
does not take place, loss of recorded data or other
direct or indirect damages related to these matters.
Please be forewarned.
EButtons for USB-recording operation
Control panel
TV INFO
TV
INF
O
EXT MEDIA
SLEEP
SLEEP
Remote control unit Control panel
Buttons Description
• Displays the list of the programmes
recorded by USB-recording.
REC E
Start recording the programme you are
watching.
• You cannot playback the recorded
programme until approximately three
seconds after pressing REC E to start
recording.
REC STOP HStop recording.
IPlayback the recorded programme.
HStop the programme in playback and go
back to the real time broadcast (live).
F
Pause the programme in playback (USB-
recording continues).
• This function is released in 15 minutes.
SReverse (each time you press this button,
the reverse speed changes in three levels).
J
Fast forward (each time you press this
button, the fast forward speed changes in
three levels).
KJump backward to the previous chapter
point*.
LJump forward to the next chapter point*.
a
Playback will resume after jumping
backward by the time interval you set in
“Jump time setting” (Page 65).
b
Playback will resume after jumping forward
by the time interval you set in “Jump time
setting” (Page 65).
* Chapter points are fixed at 10 minute increments.
NOTE
• Refer to Regarding “Select recording device” (Page 34),
when the buttons for USB-recording do not work.
• Instead of pressing buttons on the remote control unit, most
of the operations shown to the left are also available on the
screen with the control panel. You can call up this control
panel by pressing CONTROL on the remote control unit or
select “Control (USB-REC)” from “HOME” > “TV Menu” >
“Setup” > “Option” > “Option for view”.
• The “Audio description setting” menu does not work during
USB-recording playback.
• USB-recording stops if no operation detected for three hours.
• When recording operations are not stopped manually,
recording will automatically stop after six hours.
• To release USB-recording, press REC STOP H, change the
DTV channel or change “INPUT”.
• Some functions do not work during USB-recording.
• USB-recording does not start automatically, but starts only
when REC E is pressed or when a USB-recording timer
setting is started.
• The PIN is required when you use the buttons such as S,
J, K, L, a, b, if you set the PIN and any
options for “Parental rating” except “None” are selected.
• Do not disconnect the USB-HDD used for USB-recording
during USB-recording operation.
LC80LE960X_EN_book.indb 63LC80LE960X_EN_book.indb 63 4/4/2014 1:08:23 PM4/4/2014 1:08:23 PM
64
USB-recording
You can record the programme you are watching to the
registered USB HDD.
Starting USB-recording
Press REC E.
• The TV starts USB-recording.
NOTE
• You can also operate from the control panel by pressing
CONTROL.
• You cannot switch the channel or the input source during
USB-recording.
• During USB-recording, the TV cannot display photos or play
music from the internet, Home network, or USB storage
devices and SD/SDHC memory card.
• You may not record programmes.
Completing USB-recording
1Press REC STOP H.
• The screen prompt pops up.
2Press c/d to select “Yes”, and then press ?.
• USB-recording has completed.
NOTE
• You can also operate from the control panel by pressing
CONTROL.
USB-recording timer setting
You can set the USB-recording timer setting for
programmes you want to record.
NOTE
• To prevent the first part of the programme from being cut,
start recording the programme a few seconds earlier than
time set to start recording.
• When recording/viewing timer settings are set continuously
for multiple programmes, schedule the recording of the
previous programme to end earlier than the end of the
programme itself. Recording/viewing timer setting of the next
programme will start after that.
• A message will be displayed when the scheduled time
overlaps with an existing schedule. Make changes in
accordance with the on-screen instructions.
• It is not possible to newly schedule a recording that overlaps
with a timer setting that is currently running (recording). When
urgent setting of a schedule is desired, stop recording before
scheduling.
• A combined total of 16 timer settings (“Watch” and “Record”)
can be set.
• A CAM (CI Plus v1.3) PIN code may be necessary to record
broadcasts scrambled due to parental rate settings. When
a CAM PIN code is required for recording a programme, it is
necessary to enter the CAM PIN code in advance (Page 15).
If a CAM PIN code is not entered or is entered incorrectly, the
programme will not be able to be recorded/played back.
EPG timer setup
You can select the programme you want to record and
set the timer setting with EPG (Pages 26 to 28).
Manual timer setting
“Manual timer setting” enables you to set date, recording
start/stop time and channel.
1Press GUIDE.
2Press B to display the timer list.
3Press B again to display the “Manual timer
setting” screen.
4Set date, recording start/stop time and channel.
5Press c/d to select “Record”, and then press
?.
• A confirmation screen will be displayed for the timer
setting.
6Press c/d to select “Yes”, and then press ?.
NOTE
• When the country setting is set to “New Zealand”, you
may not display a Timer list screen in the above mentioned
procedure. You can display the Timer list screen from
“HOME” > “TV Menu” > “EPG” > “Timer list”.
Manual clock setting
When the TV cannot receive the time via digital
broadcast, perform “Manual timer setting” after setting
the clock.
Go to “HOME” > “TV Menu” > “View setting”
> “Individual setting” > “Clock setup” > “Time
adjustment”.
NOTE
• You cannot set the manual clock setting during USB
recording.
Timer list
A list of programmes scheduled for recording can be
displayed.
1Press GUIDE.
2Press B to display the timer list.
NOTE
• When the country setting is set to “New Zealand”, you
may not display a Timer list screen in the above mentioned
procedure. You can display the Timer list screen from
“HOME” > “TV Menu” > “EPG” > “Timer list”.
USB-recording playback
To playback the recorded programmes, open the USB-
recording list and select the desired programme.
1Go to “HOME” > “Record list”.
2Press “?” button.
• Press H to return the scene that is
broadcasting.
NOTE
• You may not playback recorded programmes when the
programme provider restricts or completely prevents
recording or later watching of an encoded programme.
• Depending on the protection signal specified by a broadcast
station, recorded broadcasts can only be played back for a
certain period of time or cannot be played back at all (Page
15).
Other useful features
LC80LE960X_EN_book.indb 64LC80LE960X_EN_book.indb 64 4/4/2014 1:08:24 PM4/4/2014 1:08:24 PM
65
Time shift playback
Playback recorded scenes of the programme being recorded.
Press d during recording.
• Press H to return the scene that is broadcasting.
NOTE
• You can also operate from the control panel by pressing
CONTROL.
• Time shift playback may take a few moments to start.
• Time shift playback will stop and the TV will return to normal
broadcasting when a programme is fast-forwarded to a
scene that is near to the scene currently being broadcast.
The timing at which it returns depends on the speed of fast-
forwarding.
• Depending on the protection signal specified by a broadcast
station, recorded broadcasts can only be played back for a
certain period of time or cannot be played back at all (Page
15).
Display information regarding USB-
recording
Channel display
Channel information displays by pressing INFO on the remote
control unit.
Audio (ENG) STEREO
Video
Subtitle Off
>> New information
The recording icon shows up when REC E is pressed
and the TV is recording the programme.
The status icon shows up depending on what is shown
on the screen.
Counter
The counter displays on the screen with the control panel.
Current playback time
• Hidden during recording
Total playback time of the content
The grey bar shows how much time has progressed.
• Hidden during recording or playback-during-recording
NOTE
• You can also call up the information above by pressing
CONTROL on the remote control unit or select “Control
(USB-REC)” from “HOME” > “TV Menu” > “Setup” >
“Option” > “Option for view”.
View setting
Auto input selection
You can choose whether or not to switch the input
source automatically when receiving an AQUOS LINK
compatible signal on the TV during USB-recording
operations.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “USB-REC setting” > “Auto input
selection”.
Item
Enable
Release USB-recording when receiving an
AQUOS LINK compatible signal. Switch
input source automatically.
Disable
USB-recording continues to work. The TV
does not switch input source automatically
even when receiving an AQUOS LINK
compatible signal.
View setting
Jump time setting
You can set the time interval for playback to resume after
jumping backwards/forward.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “USB-REC setting” > “Jump time
setting”.
• A time interval from 10 sec. to 99 min. 50 sec can be
selected.
NOTE
• You can use the time interval you set using the a or b
buttons on the control panel.
View setting
Device registration
You need to perform this function to register the USB
HDD for the USB-recording.
Go to “HOME” > “TV Menu” > “Setup” >
“View setting” > “USB-REC setting” > “Device
registration”.
• Refer to USB HDD registration (Page 62).
NOTE
• Only one USB HDD can be registered for USB-recording.
Remove all USB HDDs except the one used for USB-
recording.
• At least USB HDDs with memory between 100GB and 2TB
and under are required for USB-recording to register.
• Some USB HDDs, such as ones which have multiple drives,
etc., cannot be used for USB-recording.
Other useful features
LC80LE960X_EN_book.indb 65LC80LE960X_EN_book.indb 65 4/4/2014 1:08:24 PM4/4/2014 1:08:24 PM
66
View setting
Device format
You can format all data on the USB HDD.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “USB-REC setting” > “Device format”.
NOTE
• Once formatting has been completed, data cannot be
restored.
Multimedia/Home network
Multimedia/Home network
In both modes, you can enjoy viewing photos, listening
to music and watching videos from external USB devices
(USB Memory, USB card reader (Mass Storage Class),
USB HDD), SD/SDHC memory card or Home network
server.
NOTE
• To connect a Home network server, refer to Network
function (Pages 55 – 57).
• Some USB devices or SD/SDHC memory card may not work
properly for this function.
• The corresponding file format is different between
“Multimedia” and “Home network”.
• You can select “Wide mode” from “Auto” or “Original” in
“Photo mode” and “Full”, “Auto” or “Original” in “Video
mode”.
• Depending on the Home network server, the TV may not be
able to recognise the contained data.
• Use only alphanumeric characters for naming files.
• Do not disconnect a Home network server from the TV while
transferring files, using the slide show function, when a screen
is switching to another or before you exit “Home network”
from the “INPUT” menu.
Selecting the mode
Common operation
Select “Multimedia” or “Home network” from the
“HOME” screen to enter this mode.
Other operation
• You can select the mode from “INPUT” menu.
• Multimedia
Select the Multimedia mode option on the screen when a
USB device or SD/SDHC memory card is connected to the
TV.
Selecting modes and drives/servers
1Press B.
Multimedia mode (Example)
Folder display setting [Folder]
[Flash Disk ]
Media selection
Multimedia menu
: Select : Enter : Exit
1Press a/b to select “Media selection”, and then press
?.
• The available selections are “Media selection” and
“Folder display setting”.
2Press a/b/c/d to select the media where you want
to find your files, and then press ?.
• You can select from “All” or “Folder” for the type of
folder directory in the “Folder display setting”.
Home network mode (Example)
Server1
Server2
Press a/b to select the server where you want to
find your files, and then press ?.
• Press Y to search for servers.
2Press c/d to select “Photo mode”, “Music
mode” or “Video mode”, and then press ?.
NOTE
• The explanations for the buttons that can be used in
each mode are the explanations when using Multimedia
mode.
Some operations may differ in Home network mode. Follow
the on-screen instructions during operations.
• You do not need to select the drive/server in step 1 when
there is only one drive in the connected USB device or SD/
SDHC memory card or there is only one Home network
server connected to the TV.
• 16 is the maximum number of drives that can be displayed in
Multimedia mode.
• 10 is the maximum number of servers that can be displayed
in Home network mode.
• You cannot enter these modes when there is no server
connected to the TV in Home network mode.
Other useful features
LC80LE960X_EN_book.indb 66LC80LE960X_EN_book.indb 66 4/4/2014 1:08:24 PM4/4/2014 1:08:24 PM
67
Photo mode
Viewing thumbnails
/
Demo
MultimediaSelect photo
[File name order]
Flash Disk > Demo
Only compatible file formats are displayed.
:Back
:Display photo
:Select :Select/deselect slide show Image :To top menu :Slide show :Multimedia menu
* This screen image is for the Multimedia mode. It may be
slightly different in the Home network mode.
Buttons for thumbnail operations
(When using Multimedia mode)
Buttons Description
?
When selecting a folder icon: Enter this
directory.
When selecting a photo thumbnail:
Enlarge the photo.
a/b/c/d
(Cursor) Select a desired item.
CReturn to the previous operation.
R button Select/deselect items
(✓ mark appears on the selected items).
G button All*: Select BGM for the slide show.
Folder*: Move to the parent folder.
Y button Start the slide show.
B button
Display “Multimedia menu”.
• 3D display
• Select slide show interval
• Select slide show BGM
• Set all slide show image
• Reset all slide show image
• USB device or SD/SDHC memory
card removal
* The mode selected in “Folder display setting”.
NOTE
• When there are invalid photo files, the g mark will be
displayed for the file.
• The 3D mode icon appears on the thumbnails of 3D images.
If you do not switch to 3D mode for the 3D images, they will
be displayed in 2D.
• You can see the file name, shooting date, file size and pixel
size of the selected photo on the left of the screen (shooting
date is only available in the EXIF file format).
3D mode
You can view photos in 3D mode.
1Press B to display the “Multimedia menu” screen.
2Press a/b to select “3D display”, and then press
?.
• See pages 75 to 84 for details on the 3D function.
NOTE
• In 3D mode, you cannot rotate the photos.
• You can select “3D display” from “Multimedia menu” only
when the thumbnails screen for the photo mode in Multimedia
mode is displayed on the screen.
Viewing enlarged photos
Buttons for enlarged photo display operation
(When using Multimedia mode)
Buttons Description
c/d (Cursor) Go to the previous/next photo in the
same directory.
CReturn to the thumbnail selection screen.
3D Switch between 2D and 3D modes.
R button Rotate the photo by 90 degrees to the
left.
G button Rotate the photo by 90 degrees to the
right.
B button
Display “Multimedia menu”.
• USB device or SD/SDHC memory
card removal
DISPLAY Reveal the guide display.
NOTE
• Rotating photos only applies to the temporarily selected item
and this setting is not saved.
Selecting the picture size for Photo mode
You can select the picture size in “Photo mode”.
1Select “Photo mode”.
• Refer to Selecting modes and drives/servers on
page 66.
2Press WIDE.
• The “Wide mode” menu displays.
3Press WIDE or a/b to select the desired item.
• As you toggle the options, each is immediately reflected
on the screen. There is no need to press ?.
Item Description
Auto Keep the original aspect ratio in an
enlarged screen display.
Original Keeps the original aspect ratio and size.
NOTE
• For “Original” item, if the photo size is larger than 3840 x
2160 vertically or horizontally, the original aspect ratio is kept
in full screen display.
Other useful features
LC80LE960X_EN_book.indb 67LC80LE960X_EN_book.indb 67 4/4/2014 1:08:25 PM4/4/2014 1:08:25 PM
68
Slide show
ESelecting the BGM
Setup the slide show BGM from “Select slide show
BGM” by pressing B when selecting photo thumbnails.
This function is available only for the Multimedia mode.
Buttons for slide show BGM select operation
Buttons Description
?When selecting a music file: Play music.
a/b/c/d
(Cursor) Select a desired item.
C
When music is stopped: Return to the
previous operation.
When music is being played: Stop
music.
R button Select/deselect items (✓ mark appears
on the selected items).
G button All*: Stop music.
Folder*: Move to the parent folder.
Y button Play/pause music.
B button
Display “Multimedia menu”.
• Set all BGM
• Reset all BGM
• USB device or SD/SDHC memory
card removal
* The mode selected in “Folder display setting”.
NOTE
• Slide show BGM will be reset in the cases below.
• Select “Reset all BGM” by pressing B during selecting music
files.
• Go back to the top menu.
• Change the “INPUT”.
• When there are invalid music files, the g mark will be
displayed for the file.
• The displayed play time may differ slightly from the actual play
time depending on the files.
ESlide show
Buttons for slide show operation
(When using Multimedia mode)
Buttons Description
CReturn to the previous operation.
3D Switch between 2D and 3D modes.
DISPLAY Reveal/hide the guide display.
B button
Display the “Multimedia menu”.
• Select slide show interval
• USB device or SD/SDHC memory
card removal
NOTE
• The selected BGMs are played repeatedly.
• The slide show continues until you press C.
• Depending on the photo, the slide show interval per photo
may be longer than the interval selected in the settings.
Music mode
* This screen image is for the Multimedia mode. It may be
slightly different in the Home network mode.
Buttons for music mode
(When using Multimedia mode)
Buttons Description
?When selecting a music file: Play music.
a/b/c/d
(Cursor) Select a desired item.
C
When music is stopped: Return to the
previous operation.
When music is being played: Stop
music.
R button Select/deselect items
(✓ mark appears on the selected items).
G button All*: Stop music.
Folder*: Move to the parent folder.
Y button Play/pause music.
B button
Display “Multimedia menu”.
• Set all auto play
• Reset all auto play
• USB device or SD/SDHC memory
card removal
* The mode selected in “Folder display setting”.
NOTE
• When there are invalid music files, the g mark will be
displayed for the file.
• The displayed play time may differ slightly from the actual play
time depending on the files.
Other useful features
LC80LE960X_EN_book.indb 68LC80LE960X_EN_book.indb 68 4/4/2014 1:08:25 PM4/4/2014 1:08:25 PM
69
Video mode
16 Files 8 Files 15 Files 15 Files 10 Files
Buttons for file selecting operations
(When using Multimedia mode)
Buttons Description
?
When selecting a folder icon: Enter this
directory.
When selecting a video file: Play the video.
a/b/c/d
(Cursor)
Select a desired item.
C
Return to the previous operation.
R button
Select/deselect items
(
✓
mark appears on the selected items).
G button
All*: -
Folder*: Move to the parent folder.
Y button
Play from the beginning.
B button
Display the “Multimedia menu”.
•
Set all auto play
•
Reset all auto play
•
USB device or SD/SDHC memory card
removal
* The mode selected in “Folder display setting”.
Viewing a video
Previous/Next
Valentines.Day.2010.720p.700MB.ShAaNiG.com.mkv
REW/FWD Play/Pause
1 : 04 : 30/2 : 04 : 39
Resume jump Control (Multimedia) Multimedia menu 10% Jump
Back
Stop 0 9–
Valentines.Day.2010.720p.700MB.ShAaNiG.com.mkv
ENTER
* This screen image is for the Multimedia mode. It may be
slightly different in the Home network mode.
Buttons for playing mode
(When using Multimedia mode)
Buttons Description
?
When video is being played: Pause the
video.
When video is paused: Play the video.
a (Cursor)
Go to the beginning of a file by pressing
a once and the previous file by pressing
a twice.
b (Cursor) Go to the next file.
c/d (Cursor) Reverse/fast forward a video.
Buttons Description
CGo back to the file selection screen.
3D Switch between 2D and 3D modes.
R button Start playback from the previously
stopped scene.*1
G button Stop a video.
Y button Display the Multimedia control panel.
B button
Display “Multimedia menu”.
• Title (edition)
• Chapter
• Show video information
• USB device or SD/SDHC memory
card removal
0–9
Jump to scenes at 10% increments
(0%–90%).
• Limited to files without chapters.
DISPLAY Reveal/hide the guide display.
*1 This function is available only for the Multimedia mode.
EControl panel
Press CONTROL and the control
panel displays and operations for
video playback will be available.*
* This screen image is for the Multimedia
mode. It may be slightly different in the Home
network mode.
Tool
Audio
Title Resume
jump
[
PLAY
j
Video without chapters: Press one time to return
to the previous playback point.* Press two times to
return to the previous file.
Video with chapters: Press one time to return to the
previous chapter. Press two times to return to the
previous file.
k
Video without chapters: Press one time to advance
to the next playback point.* Press two times to
display the next file.
Video with chapters: Press one time to return to the
next chapter. Press two times to return to the next
file.
NOTE
* During playback of a file without chapters, playback points
are set automatically. Playback points are set at intervals of a
one-tenth of playback time.
• The key guide is shown when playback is resumed.
• You can also display the control panel by selecting “Control
(Multimedia)” or “Control (Home network)” from “Option” >
“Option for view”.
• Reverse/fast forward continues from one file to another during
continuous playback in the Multimedia mode. Jump forward/
back may not be available depending on the files in the Home
network mode.
Selecting the picture size for video mode
You can select the picture size in “Video mode”.
1Select “Video mode”.
• Refer to Selecting modes and drives/servers on
page 66.
2Press WIDE.
• The “Wide mode” menu displays.
3Press WIDE or a/b to select the desired item.
• As you toggle the options, each is immediately reflected
on the screen. There is no need to press ?.
Other useful features
LC80LE960X_EN_book.indb 69LC80LE960X_EN_book.indb 69 4/4/2014 1:08:25 PM4/4/2014 1:08:25 PM
70
Other useful features
EXAMPLE
Item
Auto Keeps the original aspect ratio in an
enlarged screen display.
Original Keeps the original aspect ratio and size.
Full An image fully fills the screen.
View setting
DivX(R) setup
This is the function to confirm your registration code. You
need to register the code at http://vod.divx.com.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “DivX(R) setup”.
EDivX(R) VOD registration
You can find your registration code on this menu. You
need to register the TV at http://vod.divx.com before
playing the DivX content.
EDivX(R) VOD deregistration
You can find your deregistration code on this menu.
You need to deregister the TV at http://vod.divx.com to
release the registration.
USB device/SD memory card
compatibility
USB device USB memory, USB card reader (Mass
Storage class), USB HDD
SD card SD/SDHC memory card
File system FAT/FAT32/NTFS* (*USB hard drive only)
Photo file
format
JPEG (.jpg) (DCF2.0 compliant), MP
(.mpo) (CIPA DC-007)
Music file
format
• MP3 (.mp3)
Bitrate: 32 k, 40 k, 48 k, 56 k, 64 k,
80 k, 96 k, 112 k, 128 k, 160 k, 192 k,
224 k, 256 k, 320 kbps
Sampling frequency: 32 k, 44.1 k,
48 kHz
• FLAC (.flac)
Bitrate: 128 kbps ~ 2304 kbps
Sampling frequency: 8 k, 16 k,
22.05 k, 24 k, 32 k, 44.1 k, 48 k,
88.2 k, 96 kHz
• WMA (.wma)
Bitrate: 32 kbps ~ 192 kbps
Sampling frequency: 8 k, 11.025 k,
16 k, 22.05 k, 32 k, 44.1 k, 48 kHz
Subtitle file
format SRT/SUB/ASS/SSA/SMI
Video file format
File
extension Container Video Audio
.avi AVI
DivX 3.11/4.x/5.1/6.0
XviD
H.264
MPEG4
Motion Jpeg
MP3
Dolby Digital
LPCM
ADPCM
.mkv MKV
DivX 3.11/4.x/5.1/6.0
XviD
H.264
MPEG4
MP3
Dolby Digital
DTS
LPCM
ADPCM
.asf
.wmv ASF
DivX 3.11/4.x/5.1/6.0
XviD
MPEG4
VC-1
Windows Media Video V9
MP3
Dolby Digital
LPCM
WMA
.mp4
.mov MP4
H.264
MPEG4
Motion Jpeg
MP3
AAC
Dolby Digital
Dolby Digital
Plus
.mpg
.mpeg PS MPEG2
MPEG1
Dolby Digital
MPEG
LPCM
.flv FLV Sorenson
H.264
MP3
AAC
NOTE
• Progressive format jpeg files are not supported.
• Files in USB 1.1 devices may not be played properly.
• Operation using USB hubs is not guaranteed.
• Some video file formats may not be played depending on the
file.
• Files may not be playable depending on the bitrate.
• Some USB devices and SD/SDHC memory card may not
work properly depending on the file system.
• If you insert any card other than the SD/SDHC (class 6 or
higher), it will not work.
Home network server compatibility
Photo file
format JPEG
Music file
format LPCM, MP3
Video file format MPEG2-PS, MPEG2-TS, WMV, ASF,
MP4, MOV, AVI
NOTE
• Progressive format jpeg files are not supported.
• Some video file formats may not be played depending on the
file and server.
LC80LE960X_EN_book.indb 70LC80LE960X_EN_book.indb 70 4/4/2014 1:08:25 PM4/4/2014 1:08:25 PM
71
Connecting a PC
HDMI connection
PC HDMI 1, 2, 3 or 4 terminals
n
HDMI-certified cable
PC HDMI 2 terminal*
o
p
DVI/HDMI cable 3.5 mm stereo minijack
cable
* When using the HDMI 2 terminal, you must select the proper item
in the “Audio select” menu depending on the type of HDMI cable
connected (refer to page 49 for details).
Analogue connection
PC PC terminal*
q
r
RGB cable 3.5 mm stereo minijack
cable
PC PC terminal*
s
t
DVI/RGB conversion cable 3.5 mm stereo minijack
cable
* When using the PC terminal, you must select “Video + Audio” in the
“Audio select” menu (refer to page 49 for details).
NOTE
• Refer to page 72 for a list of PC signals compatible with the TV.
Displaying a PC image on the screen
Selecting the picture size
You can select the picture size.
1Press WIDE.
• The “Wide mode” menu displays.
2Press WIDE or a/b to select the desired item.
EXAMPLE
Input signal
1024g768 1360g768
Normal Keeps the original aspect
ratio in a full screen display.
Cinema
For viewing wide screen
programmes. The top
and bottom of the image
is slightly cropped (only
1024g768 signals).
Full An image fully fills the
screen.
Dot by Dot
Detects the resolution of the
signal and displays an image
with the same number of
pixels on the screen.
NOTE
• You can also select an item from “HOME” > “TV Menu” >
“Setup” > “Option” > “Option for view” > “Wide mode”.
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
• You may not be able to change the wide mode while in 3D
mode.
• Refer to page 48 for AV signals.
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
ANALOGUE RGB: 576p/720p (50 Hz)/1080i
• The PC terminal is not compatible with 480i/576i/1080p
signals.
Connecting a PC
LC80LE960X_EN_book.indb 71LC80LE960X_EN_book.indb 71 4/4/2014 1:08:26 PM4/4/2014 1:08:26 PM
72
Adjusting the PC image
automatically
Option
Auto sync.
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected with
a commercially available DVI/RGB conversion cable, etc.
1Press b to select “PC” from the “INPUT” menu,
and then press ?.
2Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Terminal setting” > “PC signal setting” > “Auto
sync.”.
NOTE
• When “Auto sync.” is successful, “Auto Sync completed
successfully” displays. If not, “Auto sync.” failed.
• Auto Sync. is likely to succeed when an input PC image has
wide vertical stripes (e.g. pattern with high contrast stripes,
or cross-hatched). It may fail when an input PC image is solid
(low contrast).
• “Auto sync.” may fail even if “Auto Sync completed
successfully” displays.
• “Auto sync.” may fail if the PC image has low resolution, has
unclear (black) edges, or is moved while executing “Auto
sync.”.
• Be sure to connect the PC to the TV and switch it on before
starting “Auto sync.”.
• “Auto sync.” can be executed only when inputting analogue
signals through the PC terminal.
• This function is available for 3D images converted from 2D
images or normal 2D images.
Adjusting the PC image manually
Option
Fine sync.
Ordinarily you can easily adjust the picture as necessary
to change image position using “Auto sync.”. In some
cases, however, manual adjustment is needed to
optimise the image.
1Press b to select “PC” from the “INPUT” menu,
and then press ?.
2Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Terminal setting” > “PC signal setting” > “Fine
sync.”.
3Press a/b to select the specific adjustment item.
4Press c/d to adjust the item to the desired
position.
Item
H-Pos. Centres the image by moving it to the left
or right.
V-Pos. Centres the image by moving it up or
down.
Clock Adjusts when the image flickers with
vertical stripes.
Phase Adjusts when characters have low
contrast or when the image flickers.
NOTE
• For resetting all adjustment items to the factory preset values,
press a/b to select “Reset”, and then press ?.
• “Clock” and “Phase” in the “Fine sync.” menu can be
adjusted only when inputting analogue signals through the PC
terminal.
• Images may not be displayed properly depending on the
settings and/or input signals.
• This function is available for 3D images converted from 2D
images or normal 2D images.
PC compatibility chart
Resolution Horizontal
frequency
Vertical
frequency
Analogue
(D-Sub) Digital (HDMI) VESA standard
VGA 640 x 480 31.5 kHz 60 Hz ✔✔✔
SVGA 800 x 600 37.9 kHz 60 Hz ✔✔✔
XGA 1,024 x 768 48.4 kHz 60 Hz ✔✔✔
WXGA 1,360 x 768 47.7 kHz 60 Hz ✔✔✔
SXGA 1,280 x 1,024 64.0 kHz 60 Hz ✔✔✔
SXGA+ 1,400 x 1,050 65.3 kHz 60 Hz ✔✔✔
UXGA 1,600 x 1,200 75.0 kHz 60 Hz ✔✔✔
1080p 1,920 x 1,080 67.5 kHz 60 Hz ✔✔
VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and UXGA
are registered trademarks of International Business
Machines Corporation.
NOTE
• This TV has only limited PC compatibility, correct operation
can only be guaranteed if the video card conforms exactly to
the VESA 60 Hz standard. Any variations from this standard
will result in picture distortions.
Connecting a PC
LC80LE960X_EN_book.indb 72LC80LE960X_EN_book.indb 72 4/4/2014 1:08:27 PM4/4/2014 1:08:27 PM
73
PC control of the TV
• When a programme is set, the TV can be controlled
from the PC using the RS-232C or IP. The input
signal (PC/video) can be selected, the volume can be
adjusted and various other adjustments and settings
can be made, enabling automatic programmed
playing.
• Use an RS-232C serial control cable (cross type),
ETHERNET cable (commercially available) or wireless
LAN USB adapter for the connections.
NOTE
• This PC control should be used by a person who is
accustomed to using PCs.
Communication conditions for IP
LAN
ETHERNET cable
(commercially available)
Connect to the TV with the following settings made for IP
on the PC.
IP protocol TCP/IP
Host IP address Set the IP address on the TV menu.
Service None (do not select Telnet or SSH).
TCP port# Set a port number on the TV menu
(Control port).
When you set your ID and password on the TV menu, you
need to enter them as soon as you connect to the TV.
NOTE
• The connection will be cut off when there has been no
communication for 3 minutes.
View setting
IP Control setup
1Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Network setup” > “IP Control setup” .
2[Control setting]
This function is set to enable IP Control.
3[Detail setting]
You can set up Login ID, Password and Control
port for using IP Control.
Communication conditions for RS-232C
RS-232C serial control cable (cross type)
(commercially available)
Set the RS-232C communications settings on the PC
to match the TV’s communications conditions. The TV’s
communications settings are as follows:
Baud rate 9,600 bps
Data length 8 bits
Parity bit None
Stop bit 1 bit
Flow control None
Communication procedure
Send the control commands from the PC via the RS-
232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time. Wait
until the PC receives the OK response before sending
the next command.
Make sure to send “A” with the carriage return and
confirm that “ERR” returns before operating.
Command format
Eight ASCII codes +CR
nop
C1 C2 C3 C4 P1 P2 P3 P4
Command four digits: Command. The text of four
characters.
Parameter four digits: Parameter 0–9, blank, ?, minus
Return code (0DH): ?
Parameter
Input the parameter values, aligning left, and fill with
blank(s) for the remainder (be sure that four values are
input for the parameter).
When the input parameter is not within an adjustable
range, “ERR” returns (refer to “Response code format”).
0055
100
0009
0
When “?” is input for some commands, the present
setting value responds.
????
Response code format
Normal response Problem response
(communication error or
incorrect command)
OK ERR
Return code (0DH) Return code (0DH)
Connecting a PC
LC80LE960X_EN_book.indb 73LC80LE960X_EN_book.indb 73 4/4/2014 1:08:27 PM4/4/2014 1:08:27 PM
74
Command list
CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS
POWER
SETTING P O W R 0 _ _ _ POWER OFF (STANDBY)
INPUT
SELECTION
ITGD____
INPUT SWITCHING
(TOGGLE)
ITVD____TV (CHANNEL FIXED)
I D T V _ _ _ _ DTV (CHANNEL FIXED)
IAVD*___
HDMI 1f4 (1f4),
INPUT 5f6 (5f6),
PC (7)
CHANNEL
DCCH * * _ _
TV DIRECT CHANNEL
(1f99)
C H U P _ _ _ _ CHANNEL UP
C H D W _ _ _ _ CHANNEL DOWN
DTVD* * * _
DTV DIRECT CHANNEL
(1-999)
DTUP____DTV CHANNEL UP
DTDW____DTV CHANNEL DOWN
AV MODE
SELECTION
A V M D 0 _ _ _ TOGGLE
A V M D 1 _ _ _ STANDARD
A V M D 2 _ _ _ MOVIE
A V M D 3 _ _ _ GAME
A V M D 4 _ _ _ USER
A V M D 5 _ _ _ DYNAMIC (Fixed)
A V M D 6 _ _ _ DYNAMIC
AVMD7___PC
A V M D 8 _ _ _ x.v.Colour
A V M D 1 4 _ _ STANDARD (3D)*1
A V M D 1 6 _ _ GAME (3D)*1
A V M D 1 7 _ _ MOVIE THX
A V M D 1 0 0 _ AUTO
VOLUME V O L M * * * _ VOLUME (0–100)
POSITION
HPOS * * * _
H-POSITION (AV/PC)
(–nn~nn)
VPOS * * * _
V-POSITION (AV/PC)
(–nn~nn)
CLCK * * * _
CLOCK (0f180)
PHSE * * _ _
PHASE (0f40)
WIDE MODE
W
I D E 0 _ _ _ TOGGLE (AV)
W
I D E 1 _ _ _ NORMAL (AV)
W
I D E 2 _ _ _ ZOOM 14:9 (AV)
W
I D E 3 _ _ _ PANORAMA (AV)
W
IDE4___
FULL (AV/Multimedia-
Video/Home network-
Video)
W
I D E 5 _ _ _ CINEMA 16:9 (AV)
W
I D E 6 _ _ _ CINEMA 14:9 (AV)
W
I D E 7 _ _ _ NORMAL (PC)
W
I D E 8 _ _ _ CINEMA (PC)
W
I D E 9 _ _ _ FULL (PC)
W
I D E 1 0 _ _ DOT by DOT (AV/PC)
W
I D E 1 1 _ _ UNDERSCAN (AV)
W
IDE12__
AUTO (Multimedia-
Video/Home network-
Video)
W
IDE13__
ORIGINAL (AV/
Multimedia-Video/Home
network-Video)
CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS
MUTE
M U T E 0 _ _ _ TOGGLE
M U T E 1 _ _ _ MUTE
M U T E 2 _ _ _ MUTE OFF
SURROUND
A C S U 0 _ _ _ SURROUND TOGGLE
A C S U 1 _ _ _ SURROUND NORMAL
A C S U 2 _ _ _ SURROUND OFF
A C S U 4 _ _ _ SURROUND 3D HALL
A C S U 5 _ _ _ SURROUND 3D MOVIE
ACSU6 _ _ _
SURROUND 3D
STANDARD
ACSU7 _ _ _
SURROUND 3D
STADIUM
AUDIO
CHANGE A C H A _ _ _ _ TOGGLE
SLEEP TIMER
OF TM0 _ _ _OFF
O F T M 1 _ _ _ SLEEP TIMER 30 MIN
O F T M 2 _ _ _ SLEEP TIMER 1 HOUR
OF TM3 _ _ _
SLEEP TIMER 1 HOUR
30 MIN
O F T M 4 _ _ _ SLEEP TIMER 2 HOUR
OF TM5 _ _ _
SLEEP TIMER 2 HOUR
30 MIN
TELETEXT
T E X T 0 _ _ _ TEXT OFF
T E X T 1 _ _ _ TEXT ON (TOGGLE)
DCPG * * * _
DIRECT PAGE JUMP
(100f899)
3D
T D C H 0 _ _ _ 3D OFF
TDCH1 _ _ _
2D s 3D
T D C H 2 _ _ _ SIDE BY SIDE
T D C H 3 _ _ _ TOP AND BOTTOM
TDCH4 _ _ _
3D s 2D (SIDE BY SIDE)
TDCH5 _ _ _
3D s 2D (TOP AND
BOTTOM)
T D C H 6 _ _ _ 3D AUTO
TDCH7 _ _ _
3D s 2D*1
DEVICE NAME T V N M 1 _ _ _ DISPLAY THE DEVICE
NAME
SOFTWARE
VERSION SWV N 1 _ _ _DISPLAY THE
SOFTWARE VERSION
IP PROTOCOL
VERSION IPPV1___
DISPLAY THE IP
PROTOCOL VERSION
*1 These commands are available only during 3D mode.
NOTE
• If an underbar (_) appears in the parameter column, enter a
space.
• If an asterisk (*) appears, enter a value in the range indicated
in brackets under CONTROL CONTENTS.
• Some command on DTV operation may not work in setting of
some country.
Connecting a PC
LC80LE960X_EN_book.indb 74LC80LE960X_EN_book.indb 74 4/4/2014 1:08:28 PM4/4/2014 1:08:28 PM
75
You can enjoy 3D-supported images on this TV when you wear 3D glasses.
To produce 3D images, liquid crystal shutters in the 3D glasses alternately open and close imperceptibly fast to exactly
match alternating left and right video images displayed by the TV.
NOTE
• Refer to the operation manual of the 3D glasses for details regarding usage.
• Some menu items are greyed out in 3D mode. This is not a malfunction.
Before using the 3D glasses
• Not all consumers can experience and enjoy 3D TV. Some people suffer from stereo blindness which prevents them from
perceiving the intended depth of 3D entertainment. Also, some people who watch 3D programming may experience initial feelings
of motion sickness as they adjust to the picture. Others may experience headaches, eye fatigue or motion sickness. Some viewers
might also experience epileptic seizures. Like a roller coaster, the experience is not for everyone.
• The 3D glasses are precision equipment. Handle them with care.
• Improper use of the 3D glasses or failure to follow these instructions can result in eye strain.
• If you experience dizziness, nausea, or other discomfort while viewing 3D images, immediately discontinue use of the 3D glasses.
Using the 3D TV with incompatible 3D broadcasts or software can make images appear blurry or create overlapping images.
• When viewing 3D images continuously, be sure to take a break periodically to prevent eye strain.
• If you are nearsighted or farsighted or have astigmatism or a different level of eyesight between the left and right eyes, you should
take the necessary steps, such as wearing eyeglasses, to correct your eyesight before viewing 3D images. The 3D glasses can be
worn over eyeglasses.
• When viewing 3D images, keep the 3D glasses horizontally level with the TV screen. If you tilt the 3D glasses with respect to the TV
screen, the images viewed by the left and right eyes may appear significantly different or images may appear overlapping.
• View 3D images at the appropriate distance from the TV screen. The recommended distance is three times the effective height of
the TV screen.
• Be careful of your surroundings when viewing 3D images. When you view 3D images, objects may appear closer or farther than
they are. This may cause you to misjudge the distance and possibly result in injury if you accidentally hit the screen or surrounding
objects.
• The 3D glasses are not recommended for people aged less than 6.
• When children are viewing 3D images, be sure a parent or guardian is present. Monitor children viewing 3D images, and if they
show signs of discomfort, immediately discontinue use of the 3D glasses.
• People with a known history of photosensitivity and people with heart problems or poor health should not use the 3D glasses. This
can worsen existing health conditions.
• Do not use the 3D glasses for other purposes (such as general eyeglasses, sunglasses, or protective goggles).
• Do not use the 3D function or 3D glasses while walking or moving around. This may result in injuries due to running into objects,
tripping, and/or falling.
• When using the 3D glasses, take care not to accidentally strike the TV screen or other people. Viewing 3D images may cause you
to misjudge the distance to the TV screen and accidentally strike the screen, resulting in possible injury.
• It is recommended that you do not view 3D images if you are sleep deprived or if you have been drinking alcohol.
indicates compatibility between TV products and 3D Glasses which are compliant with the “Full HD 3D
Glasses™” format, and does not indicate picture quality of TV products.
Enjoying 3D image viewing
LC80LE960X_EN_book.indb 75LC80LE960X_EN_book.indb 75 4/4/2014 1:08:28 PM4/4/2014 1:08:28 PM
76
Enjoying 3D image viewing
Preparing for the 3D glasses
Part Names
n
o
Power button and LED indicator
Nose pad
NOTE
• The power turns off automatically when the 3D glasses are
not operated in standby for approximately 15 seconds
1Power button
• When the power button is pressed for 2 or more
seconds with the power off, pairing with the TV starts.
• When the power button is pressed for 2 or more
seconds with the power on, the power turns off.
• When paired, the power will turn off if the power button
is pressed for 2 or more seconds.
• When the 3D glasses are in 3D mode with the power on,
pressing the power button for less than 2 seconds will
turn the 3D glasses to 2D mode.
• When the 3D glasses are in 2D mode with the power on,
pressing the power button for less than two seconds will
turn the 3D glasses to 3D mode.
• When paired, the 3D glasses will be non-reactive if the
power button is pressed for less than 2 seconds.
LED indicator
• When paired with the TV, the LED light blinks in green.
• When the power is turned on, the LED lights up in green
for 3 seconds.
• When in 3D mode, the LED blinks in green in 3-second
intervals.
• When in 2D mode, the LED blinks in red in 3-second
intervals.
• When the power is turned off, the LED lights up in red for
3 seconds.
NOTE
• When in low voltage mode:
−When in 3D mode, the LED blinks in green in
3-second intervals.
−When in 2D mode, the LED blinks in red in 3-second
intervals.
2Nose pad mount
• The dedicated nose pad can be mounted here.
LC80LE960X_EN_book.indb 76LC80LE960X_EN_book.indb 76 4/4/2014 1:08:28 PM4/4/2014 1:08:28 PM
77
Enjoying 3D image viewing
Using the 3D glasses
Before using the 3D Glasses
Before using the 3D glasses for the first time, remove the
insulating sheet attached to them.
Attaching the Nose Pad
Attach either of the supplied nose pads as needed (such
as when the glasses do not fit properly). The glasses
come with a large and small nose pad.
Removing the nose pad Attaching the nose pad
Using the 3D glasses
Pairing the 3D glasses
To view 3D images, it is necessary to pair the 3D glasses
and TV.
• To confirm pairing of the 3D glasses and TV, make sure that
3D images are displayed on the TV screen.
• When the power button is pressed for 2 or more seconds
with the power off, pairing with the TV starts. When pairing
is completed successfully, the LED lights up in green for 3
seconds.
• To switch between 2D and 3D modes, briefly press the power
button.
50 cm–2 m
NOTE
• When paired, make sure that the 3D glasses are kept at
a distance of 50 cm–2 m from the TV. If too close, pairing
cannot be performed.
Switching to 3D and 2D Mode
When viewing 3D images, you can press the power
button to switch between 2D and 3D modes. This is
useful when several people are viewing 3D images on the
same TV with some people wanting to watch in 3D and
some people wanting to watch in 2D.
EViewing 2D images
When you press and hold for less than 2 seconds
while viewing 3D images, the LED light blinks in
red and the 3D images switch to 2D images.
EViewing 3D images
When you press and hold for less than 2 seconds
while viewing 2D images, the LED light blinks in
green and the 2D images switch to 3D images.
Usage Range of the 3D Glasses
The 3D glasses can be used by receiving a signal sent
from the TV.
The 3D glasses turn off automatically after 15 seconds if
no signal is received from the TV.
EOperating range
From directly the TV: approx. 5 m (within approx.
30° horizontally and 20° vertically)
LC80LE960X_EN_book.indb 77LC80LE960X_EN_book.indb 77 4/4/2014 1:08:28 PM4/4/2014 1:08:28 PM
78
Enjoying 3D image viewing
Replacing the Battery
The battery has an expected service life of approximately
75 hours.
• When replacing the button battery, use only the designated
battery (Maxell branded CR2025 lithium button battery).
1Use the tip of a ballpoint pen or similar object to
press in on the lock.
2While pressing in on the lock, place your fingertip
in the groove and pull out the battery holder.
• Pull the battery holder all the way out.
3Replace the battery.
1Use the tip of a ballpoint pen or similar object to
remove the battery.
2Insert a new battery.
• Insert the battery with the negative side (-) facing up.
4Align the battery holder with the battery slot on the
3D glasses and slide it back into place.
• Press it in until it locks.
NOTE
• Take care not to reverse the battery poles (+) and (-) when
loading the battery.
• Used batteries should be disposed of strictly in accordance
with the applicable local laws and regulations.
LC80LE960X_EN_book.indb 78LC80LE960X_EN_book.indb 78 4/4/2014 1:08:29 PM4/4/2014 1:08:29 PM
79
Enjoying 3D image viewing
Cautions for 3D image viewing
3D glasses lenses
• Do not apply pressure to the lenses of the 3D glasses. Also, do not drop or bend the 3D glasses.
• Do not scratch the surface of the lenses of the 3D glasses with a pointed instrument or other object. Doing so may damage the
3D glasses and reduce the quality of the 3D image.
• Use only the cloth provided with the 3D glasses to clean the lenses.
3D glasses infrared receiver
• Do not allow the infrared receiver to become dirty, and do not attach stickers to or otherwise cover the infrared receiver. Doing
so may prevent the receiver from operating normally.
• If the 3D glasses are affected by other infrared data communication equipment, 3D images may not be displayed correctly.
Caution during viewing
• Do not use devices that emit strong electromagnetic waves (such as cellular phones or wireless transceivers) near the 3D
glasses. Doing so may cause the 3D glasses to malfunction.
• The 3D glasses cannot operate fully at extreme high or low temperatures. Please use them within the specified usage
temperature range.
• If the 3D glasses are used in a room with fluorescent lighting, the light within the room may appear to flicker. In this case, either
darken or turn off the fluorescent lights when using the 3D glasses.
• Wear the 3D glasses correctly. 3D images will not be correctly visible if the 3D glasses are worn upside down or back-to-front.
• Other displays (such as computer screens, digital clocks, and calculators) may appear dark and difficult to view while wearing
the 3D glasses. Do not wear the 3D glasses when watching anything other than 3D images.
• If you lie on your side while watching the TV with 3D glasses, the picture may look dark or may not be visible.
• Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D images. Otherwise, you may not
be able to enjoy the full 3D effect.
• The 3D glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV. If
this occurs, turn off the other 3D product or electronic devices or keep the devices as far away as possible from the 3D glasses.
• Stop using this product in any of the following situations:
– When images consistently appear doubled while you are wearing the 3D glasses
– When you have difficultly perceiving the 3D effect
• If the 3D glasses are faulty or damaged, stop using them immediately. Continued use of the 3D glasses may cause eye fatigue,
headaches and illness.
• If you have any abnormal skin reaction, stop using the 3D glasses. In very rare instances, such reactions may be due to an
allergic reaction to the coating or materials used.
• If your nose or temples become red or you experience any pain or itchiness, stop using the 3D glasses. Pressure caused by
long periods of use may lead to such reactions and may result in skin irritation.
• You may not be able to use several menu items while you are watching the TV in 3D mode.
• You cannot use the 3D function in radio or data mode.
NOTE
• These 3D glasses are only for use with SHARP LCD TVs supporting 3D.
Display format for 3D and 2D images
Image for input signals Selectable mode Description
3D mode
(using the 3D
glasses)
2D s 3D • Converts normal 2D images into 3D
images.
Side by Side
•
Creates 3D images from 3D images
displayed side by side. The image is
split into a left and right image, and then
the images are stretched and displayed
sequentially to create a 3D image.
Top and Bottom
•
Creates 3D images from 3D images
displayed on the top and bottom. The
image is split into a top and bottom image,
and then the images are stretched and
displayed sequentially to create a 3D image.
2D mode
(without using the
3D glasses)
Side by Side s 2D
•
Creates 2D images from 3D images
displayed side by side. Only the left image
is stretched and displayed. The image does
not appear in 3D.
Top and Bottom s 2D
•
Creates 2D images from 3D images
displayed on the top and bottom. Only the
top image is stretched and displayed. The
image does not appear in 3D.
LC80LE960X_EN_book.indb 79LC80LE960X_EN_book.indb 79 4/4/2014 1:08:29 PM4/4/2014 1:08:29 PM
80
Viewing 3D images
MENUMEN
U
NOTE
• The TV screen may temporarily become black when the TV is
trying to detect a 3D image signal and when switching from
3D to 2D mode.
Receiving a 3D image signal that
can be detected automatically
The image signal may contain a 3D identification signal.
You can enable the TV to automatically detect the 3D
image type (Page 79).
1Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “3D setup” > “3D auto change”.
EWhen “3D auto change” is set to “Mode 1”
or “Mode 2”
• The 3D display format is detected automatically and the
appropriate 3D image is displayed.
EWhen “3D auto change” is set to “Off”
1The confirmation message is displayed. Press 3D.
2Press c/d to select “Yes”, and then press ?.
2Turn on the power of the 3D glasses, and then
wear the 3D glasses.
• Press the power button for at least two seconds.
• The LED light blinks three times.
NOTE
• If you do not want to switch to 3D mode automatically, set
“3D auto change” to “Off”.
• When the TV is receiving a 3D image signal that can be
detected automatically, the 3D mode icon is displayed in the
channel display.
Switching 3D to 2D mode
When you press 3D while you are watching the TV in 3D
mode, the TV switches to 2D mode.
1Press 3D during the 3D mode.
2Select “Yes”, and then press ? to switch to 2D
mode.
3Take off the 3D glasses and turn off the power of
the 3D glasses.
• Press the power button for at least two seconds.
• The LED light lights for two seconds.
NOTE
• If the input signal switches to 2D, 2D images are displayed
automatically.
• 3D mode is cancelled automatically when the setting is
changed, input source is changed, the input signal resolution
is changed or the power is turned off.
Receiving a 3D image signal that
cannot be detected automatically
When the TV receives a 3D image signal that cannot be
detected automatically, you can select between 3D and
2D image viewing.
1Press 3D.
• A screen appears prompting you to select between 3D
and 2D image viewing.
2Press c/d to select “3D” or “2D”, and then press
?.
ETo view in 3D mode
1Press c/d to select the 3D signal type (“2D s 3D”,
“Side by Side” or “Top and Bottom”), and then press
?.
Side by Side Top and Bottom
• If you select the same system as that of the input signal,
3D images are displayed.
• You can select only “2D s 3D” in TV mode.
2Turn on the power of the 3D glasses, and then wear
the 3D glasses.
• Press the power button for at least two seconds.
• The LED light blinks three times.
ETo view in 2D mode
• Switching from 3D to 2D mode.
Press c/d to select the 2D signal type (“Side by Side”
or “Top and Bottom”), and then press ?.
Side by Side Top and Bottom
• If you select the same system as that of the input signal,
2D images are displayed.
Enjoying 3D image viewing
LC80LE960X_EN_book.indb 80LC80LE960X_EN_book.indb 80 4/4/2014 1:08:29 PM4/4/2014 1:08:29 PM
81
Enjoying 3D image viewing
Watching 2D images in 3D
You can convert normal 2D images into 3D images.
1Press 3D.
2Press c/d to select “2D s 3D”, and then press
?.
3Turn on the power of the 3D glasses, and then
wear the 3D glasses.
NOTE
• The confirmation message to select either 3D or 2D mode is
displayed on the screen once per hour.
• When the TV converts normal 2D images into 3D images, you
can display the “2D s 3D convert effect” menu to adjust the
convert effect by pressing Y.
Switching to the previous mode
You can switch back to the previous mode by pressing
3D.
1Press 3D.
• A confirmation message is displayed.
2Select “Yes”, and then press ?.
• The TV returns to the previous mode.
3D Menu
Pressing 3D in 3D mode displays the 3D menu. Press
the coloured buttons to make the necessary settings.
MENU
GUIDE
MENU
G
UIDE
Buttons Description
R button 3D brightness boost (Page 81).
G button
Surround (Page 41).
• The surround mode changes each
time you press G.
Y button
2D s 3D convert effect (Page 82).
• “2D s 3D convert effect” is available
only when selecting “2D s 3D” (refer
to Watching 2D images in 3D
shown above).
B button 3D setup (Page 82).
Configuring the TV settings to
enhance 3D image viewing
You can make various settings to enhance 3D image
viewing.
SLEEP
S
LEE
P
3D picture adjustments
EBasic operation
Go to “HOME” > “TV Menu” > “Setup” > “Picture”
> select/adjust the item you want to set.
NOTE
• Which items can be selected/adjusted differs depending on
whether the TV is in 2D mode or in 3D mode.
AV mode
The audio and video settings can be changed to suit the
programme or input content being watched.
Item
STANDARD (3D) For a highly defined image in a normal
lighting.
GAME (3D) Lowers image brightness for easier
viewing.
NOTE
• You can select “AV mode” by pressing # on the
remote control unit.
3D brightness boost
You can adjust the backlight of the TV for 3D image
viewing.
Item
High The screen brightens
Middle
Low The screen dims
NOTE
• When “High” or “Low” is selected, “OPC”, “Backlight” and
“Range of OPC” are not available.
• The “3D brightness boost” is not available for 2D mode.
• The “3D brightness boost” items can be saved for every 3D
“AV mode” item (“STANDARD (3D)”, “GAME (3D)”).
LC80LE960X_EN_book.indb 81LC80LE960X_EN_book.indb 81 4/4/2014 1:08:30 PM4/4/2014 1:08:30 PM
82
3D setup
EBasic operation
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “3D setup” > select the menu you want to set.
3D auto change
This function allows the TV to switch to 3D mode
automatically when a 3D identification signal is detected.
Item
Mode 1
3D mode is selected automatically when
a 3D signal is detected while viewing
video from a VOD service or HDMI-
connected equipment.
Mode 2
3D mode is selected automatically when,
in addition to detecting a 3D signal while
viewing video from a VOD service or
HDMI-connected equipment, a video
pattern with “Side by Side” or “Top and
Bottom” format is also detected.
Off Auto change is not performed.
NOTE
• 3D signals may not be detected depending on the signal
format.
3D depth control
Select the method for adjusting the 3D depth.
Item
Auto Adjusts the depth automatically.
Manual Manually adjusts the depth using the
function “Depth change”.
NOTE
• This function is only available when the input signal is 3D.
• This function is not displayed depending on the type of 3D
signal.
Depth change
Adjusts the depth manually. “0” is the level where no
adjustment is made.
NOTE
• This function is only available when “3D depth control” is
“Manual”.
2D s 3D convert effect
You can adjust the 3D effect when converting images
from 2D mode to 3D mode. Select a desired level of
convert effect from e1 to e16.
NOTE
• This function is only available when converting 2D images to
3D images.
• When you use this function, image conversion on the TV will
result in some differences in the original images and how they
appear.
• 2D images that have been converted to 3D images may be
viewed only for personal use.
Viewing time info
This function allows you to display the elapsed time of
3D image viewing on the screen.
Item
Yes
The elapsed time is displayed in one-
hour increments after you start watching
3D images.
No Hide the time.
3D test
This function displays 3D images for testing the 3D
operation. Clicking “Start” on the screen plays back 3D
test images.
NOTE
• If you press B during playback, the previous screen will be
displayed.
Enjoying 3D image viewing
LC80LE960X_EN_book.indb 82LC80LE960X_EN_book.indb 82 4/4/2014 1:08:30 PM4/4/2014 1:08:30 PM
83
Specifications — 3D glasses
Product 3D Glasses
Lens type Liquid crystal shutter
Power supply DC3V
Battery Lithium button battery (CR2025 x 1)
Battery life Approx. 100 hours of continuous use
Dimension (W x H x D) 171 × 42.6 × 165.3 mm
Weight Approx. 31.0 g (including the lithium battery)
Operating temperature
10°C to 40°C (The 3D glasses cannot operate fully at extreme high or low temperatures.
Please use them within the specified usage temperature range.)
0 3 2 P
The product serial number is displayed on the 3D glasses as indicated in the illustration on
the left. From the right to three digits represent the date of manufacture.
Example: Manufactured on February 23, 2013
1: 1
2: 2
3: 3
8 : 8
9 : 9
A : 10
B : 11
C : 12
1: 1
2: 2
3: 3
A : 10
B : 11
H : 17
J : 18
N : 22
P : 23
W : 30
X : 31
Month of
manufacture
2: 2012
3: 2013
4: 2014
Year of
manufacture
Discrimination
number
Day of
manufacture
* “I”, “O”, “Y” and “Z” are not used.
NOTE
• Please contact your local authority for the correct method of disposal of this product and/or packing.
Enjoying 3D image viewing
LC80LE960X_EN_book.indb 83LC80LE960X_EN_book.indb 83 4/4/2014 1:08:30 PM4/4/2014 1:08:30 PM
84
Enjoying 3D image viewing
Troubleshooting — 3D Images
Problem Possible solution
• 3D images are not displayed. • Is “3D auto change” set to “Off”? Press 3D to switch to 3D mode (Page 82).
• If “3D auto change” is set to “Mode1” or “Mode2” but no 3D images are displayed,
check the display format of the content being viewed. Some 3D image signals may
not be recognized as 3D images automatically. Press 3D to select the appropriate
display format for the 3D image (Page 82).
• Is the power of the 3D glasses turned on? Press the power button for at least 2
seconds to turn on the 3D glasses.
• Are the 3D glasses set to 2D mode? Press the power button for an amount of time
that is less than 2 seconds to switch the 3D glasses to 3D mode.
• Is there an obstacle between the 3D glasses and the TV, or is something covering
the receiver on the 3D glasses? The 3D glasses operate by receiving a signal from
the TV. Do not place anything between the 3D emitter on the TV and the receiver on
the 3D glasses.
• Images displayed in 3D mode appear
doubled while you are wearing the 3D
glasses.
• Is the power of the 3D glasses turned on? Press the power button for at least 2
seconds to turn on the 3D glasses.
• Images displayed in 3D mode appear
2D while you are wearing the 3D
glasses.
• Are the 3D glasses set to 2D mode? Press the power button while viewing 2D
images, the LED light blinks in green and the 2D images switch to 3D images.
• For further details, refer to the operation manual of the 3D glasses.
LC80LE960X_EN_book.indb 84LC80LE960X_EN_book.indb 84 4/4/2014 1:08:30 PM4/4/2014 1:08:30 PM
85
Troubleshooting
Problem Possible solution
• No power. • Is the AC cord disconnected?
• Check if you pressed < on the TV.
• When the power switch does not work, remove the power plug and insert it again, and press
< on the TV after waiting more than five seconds.
• The TV cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation. In
this case, operate the TV after first turning off the power, or unplugging the AC cord and
re-plugging it in after one or two minutes.
• Remote control unit does not
operate.
• Are batteries inserted with polarity (e, f) aligned?
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminating to the remote control sensor?
• Picture is cut off. • Is the image position correct?
• Are screen mode adjustments (Wide mode) such as picture size made correctly? (Pages
48f49, 69, 70 and 71).
• Strange colour, light colour, or dark
colour, or colour misalignment.
• Adjust the picture tone (Pages 38f40).
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the “Colour system” setting (Pages 44 and 51).
• Check the “HDMI auto view” setting (Page 50).
• Power is suddenly turned off. • The TV’s internal temperature has increased. Remove any objects blocking the vent or clean.
• Is the “Sleep timer” set? Select “Off” from the “Sleep timer” menu (Page 42).
• Is “No signal off” or “No operation off” activated? (Page 42)
• No picture. • Are connections to external equipment correct? (Pages 29f32)
• Is the correct input source selected? (Page 20)
• Is a non-compatible signal being input? (Page 72)
• Is the picture adjustment correct? (Pages 38f40)
• Is the antenna connected properly? (Page 10)
• No sound. • Is the volume too low?
• If you do not clearly hear the sound for the visually impaired, go to “HOME” > “TV Menu” >
“Setup” > “Audio” > “Audio description setting” > “Mix level”, and select the upper level to turn
up the volume.
• Make sure that headphones are not connected.
• Check if you pressed e on the remote control unit.
• Is the proper item selected in the “Audio select” menu when connecting devices to the HDMI 2
terminal or the PC terminal? (Pages 30, 49 and 71)
• The TV sometimes makes a cracking
sound.
• This is not a malfunction. This happens when the cabinet slightly expands and contracts
according to changes in temperature. This does not affect the TV’s performance.
• AQUOS.NET top page cannot be
displayed.
• Is the ETHERNET cable connected correctly? (Page 55)
• Check the settings of “Network setup”. (Pages 55f58)
• Some Internet functions used on a
PC are not available from the TV.
• The TV has only limited functions compared with regular PC browsers. (Page 60)
• Miracast image/audio cannot be
output to the TV.
• Check pairing.
• Bluetooth (smartphone) playback
cannot be displayed on the TV.
• Check pairing.
Troubleshooting — Digital broadcasting
Problem Error code Possible solution
• No picture or no sound. — • Is the correct input source selected? (Page 20)
• Block noise appears on the screen. — • Is the antenna pointing in the correct direction?
• Check the “Signal strength” and “Quality” (Page 18).
• Are physical objects blocking the antenna?
• Is the antenna or antenna cable compatible with DTV broadcast?
• DTV broadcasts cannot be
received.
E202 • Is the DTV antenna set up properly?
• Is the antenna cable connected properly? (Page 10)
• Is the channel settings correct? (Page 18)
• A specific channel cannot be
received.
— • Check the “Signal strength” and “Quality” (Page 18).
• No broadcast now. E203 • Check the current broadcast.
Appendix
LC80LE960X_EN_book.indb 85LC80LE960X_EN_book.indb 85 4/4/2014 1:08:30 PM4/4/2014 1:08:30 PM
86
Reset
If complex adjustments are made so that the settings
cannot be restored to normal, you can reset the settings
to the factory preset values.
1Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Reset”.
2If you have already set the password, enter it here.
3Press c/d to select “Yes”, and then press ?.
• “Now, TV will restart automatically, OK?” displays on the
screen.
4Press c/d to select “Yes”, and then press ?.
• “Now initialising...” displays on the screen and blinks.
• After the reset has completed, the power shuts off and
then comes back on. The screen will have returned to its
original settings.
5Press a/b/c/d to select the desired language
listed on the screen, and then press ?.
Press c/d to select “HOME” or “STORE”, and
then press ?.
6Setting the country.
Press a/b/c/d to select your country or area,
and then press ?.
• This setting screen only appears during the initial auto
installation.
7The TV searches for and stores all the receivable
TV stations according to their settings and the
connected antenna.
• To abort the initial auto installation in progress, press
C.
NOTE
• When the TV is in “STORE” mode, repeat steps 1 to 5 to
change to “HOME” mode.
• “Reset” is greyed out in 3D mode. To select the “Reset”
menu, you need to switch to 2D mode.
Updating your TV via DVB-T (DTV
only)
Ensure that your TV software version is always up to
date. From time to time SHARP will make updated TV
base software and DVB software available.
View setting
Download setup
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Standby search”
> “Download setup”.
Searching for updates
The TV automatically determines whether a new software
version is available when the TV is in standby mode.
Item
Yes
Automatically searches for new software
updates available when the TV is in
standby mode.
No Does not search for update information.
Now
Lowers image brightness for easier
viewing. Checks if there is new software
immediately.
Downloading the software
You can select the method of update.
1If the software is updated, the confirmation
message “New download information has been
detected.” appears.
• If the TV receives the update service while in standby
mode, a confirmation message displays after turning on
the power.
2Follow the screen prompts.
Item
Yes
Starts downloading immediately. It takes
approximately one hour to update. You
cannot carry out other operations while
downloading.
• Cancels the download by pressing
? on the remote control unit when
“Discontinue” is displayed on the
screen during the update.
No Starts downloading automatically several
minutes after entering standby mode.
NOTE
• Do not unplug the AC cord while receiving the data, otherwise
it will not be captured properly.
• Updating the software may take some time.
Appendix
LC80LE960X_EN_book.indb 86LC80LE960X_EN_book.indb 86 4/4/2014 1:08:30 PM4/4/2014 1:08:30 PM
87
Getting information
Information
Picture / Audio test
When external equipment is connected with the TV
powered on and there is no audio/video output, the TV
may determine which equipment could cause a problem
between the TV and the external equipment.
Go to “HOME” > “TV Menu” > “Setup” >
“Information” > “ Picture / Audio test”.
NOTE
• Terminals which can be tested:
HDMI, component, composite, SCART, DVI, D-sub
• External speakers cannot be tested. This function is available
for the TV speakers only.
Item
Picture test
Perform a test for picture display. When
external equipment is connected but the
picture is not displayed, the test will be
performed.
Audio test
Perform a test for audio playback. When
external equipment is connected but the
audio does not playback, the test will be
performed.
Information
Message list (DTV only)
When new software is detected, you can confirm the
update information and download the software from
“Message list”.
Go to “HOME” > “TV Menu” > “Setup” >
“Information” > “Message list”.
NOTE
• When the TV succeeds at downloading new software, the
message is updated in the “Message list” of the “Information”
menu.
• The software update will not be carried out if there is no new
software available at the specified download time.
Information
Receiver report (DTV only)
Display reports regarding failures and changes for timer
settings.
Go to “HOME” > “TV Menu” > “Setup” >
“Information” > “Receiver report”.
Information
Identification
You can check the TV ID on the screen for reporting to
customer service.
Go to “HOME” > “TV Menu” > “Setup” >
“Information” > “Identification”.
Updating your TV via USB/Network
Information
Software update
This function allows you to update to the latest software
using a USB device or Network.
1Go to “HOME” > “TV Menu” > “Setup” >
“Information” > “Software update” > “USB
update”.
• You can also update the software through the network.
Go to “HOME” > “TV Menu” > “Setup” > “Information” >
“Software update” > “Network update” > and follow the
on-screen instruction.
• A broadband connection and Network setup are
required to update the software using the internet (Pages
55 – 57).
2Press ? and then insert the USB device
containing the software update file.
CAUTION
• Be sure to insert the USB device correctly into the terminal.
3The TV displays a confirmation screen while
checking the data in the inserted USB device.
CAUTION
• If the data is not compatible with the system, an error
message appears on the screen. Repeat steps 2 and 3 after
pressing ?.
• When an error message displays, check to see if:
• The USB device is inserted firmly.
• The USB memory has two or more software update files.
• No data for updating the system exists in the USB
memory.
• The software update file is broken.
• The software update file is not compatible with your TV’s
software.
• The current system is same as the system update data.
• The USB memory is not formatted by FAT32.
4The TV displays the software version information
after checking the data.
5Press c/d to select “Yes” to update the system,
and then press ?.
6The TV restarts automatically, and the software
update will be complete.
• This operation may take a while.
NOTE
• You cannot update the software using a SD/SDHC memory
card containing the update file.
Appendix
LC80LE960X_EN_book.indb 87LC80LE960X_EN_book.indb 87 4/4/2014 1:08:31 PM4/4/2014 1:08:31 PM
88
Appendix
Information on the software licence for this product
Software licence
You can read the software licences in this menu.
Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Software licence”.
ESoftware composition
The software included in this product is comprised of various software components whose individual copyrights are
held by SHARP or by third parties.
Warning regarding basic use
Cautions regarding use in high and low temperature environments
• When the TV is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This is
not a malfunction, and the TV will recover when the temperature returns to normal.
• Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location exposed to direct sunlight or near a heater,
as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: – 20 °C to e 60 °C.
LC80LE960X_EN_book.indb 88LC80LE960X_EN_book.indb 88 4/4/2014 1:08:32 PM4/4/2014 1:08:32 PM
89
Trademarks
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
Products that have earned the ENERGY STAR® are designed to protect the environment through energy efficiency.
DivX®, DivX Certified®, DivX Plus® HD and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device
that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX
videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to
complete your registration.
LC _ LCFONT+ and LC logo mark are registered trademarks of SHARP Corporation.
This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on
an LCD screen. However, other non-LCD fonts are used for displaying some screen pages.
“x.v.Colour” and are trademarks of Sony Corporation.
DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance.
Audio Engine is a trademark of Yamaha Corporation.
YouTube and the YouTube logo are trademarks of Google Inc.
XT9 (R) is a registered trademark of Nuance Communications, Inc. and its affiliates in the United States and other countries. Copyright (c) 2012
Nuance Communications, Inc. All rights reserved.
MHL, the MHL Logo, and Mobile High-Definition Link are trademark or registered trademarks of MHL LLC in the United Stated and other countries.
This product includes DLNA Software 'DiXiM' developed by DigiOn, Inc.
All other company or product names are trademarks or registered trademarks of their respective companies.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0+ Digital Out is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
THX and the THX logo are trademarks of THX Ltd. which are registered in some jurisdiction. All rights reserved.
SDHC Logo is a trademark of SD-3C, LLC.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
Wi-Fi CERITIFIED Miracast™ and Miracast™ are trademarks of Wi-Fi Alliance.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by SHARP Corporation is
under license. Other trademarks and trade names are those of their respective owners.
Appendix
LC80LE960X_EN_book.indb 89LC80LE960X_EN_book.indb 89 4/4/2014 1:08:32 PM4/4/2014 1:08:32 PM
90
Specifications
Item LC-80LE960X LC-70LE960X LC-60LE960X
Resolution 1,920 x 1,080
Video colour system PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV function TV-standard Analogue PAL (B/G, D/K, I), SECAM ( B/G, D/K, K/K1), NTSC:(M)
Digital DVB - T/DVB - T2
Receiving
channel
VHF/UHF 44.25-863.25 MHz
TV tuning system Auto preset 02ch/07ch/09ch/10ch/28ch at Australia.
STEREO/BILINGUAL NICAM (B/G, I, D/K), A2 stereo (B/G), BTSC
Audio amplifier 10 W x 2, 15 W x 1 (Woofer)
Terminals ANT (Antenna input) UHF/VHF 75 q Din type
RS-232C D-Sub 9 pin male connector
PC 15 pin mini D-sub, AUDIO in (shared usage with HDMI2) ( 3.5 mm jack)
INPUT 1 HDMI HDMI (HDMI input) (HDCP 2.2)
INPUT 2 HDMI HDMI (HDMI input), AUDIO in (shared usage with PC) ( 3.5 mm jack)
INPUT 3 (ARC) HDMI HDMI (HDMI input), ARC
INPUT 4 (MHL) HDMI HDMI (HDMI input), MHL
INPUT 5 VIDEO in, AUDIO in ( 3.5 mm jack)
INPUT 6 AUDIO in, VIDEO in, COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz,
720P/60Hz, 1080I/50Hz, 1080I/60Hz)
USB 1 USB
USB 2 USB
USB 3 (HDD) USB
SD/SDHC SD/SDHC memory card*2
ETHERNET (10/100 BASE-T) Network connector
AUDIO IN (HDMI 2/PC) 3.5 mm jack*1
DIGITAL AUDIO OUTPUT Optical S/PDIF digital audio output
OUTPUT/Headphones 3.5 mm jack (audio output)
C.I. (Common Interface) EN50221, R206001, CI Plus specification
OSD language English/Simplified Chinese/Arabic/French/Portuguese/Russian/Persian/Thai/
Vietnamese/Indonesian
Power requirement AC 110—240 V, 50/60 Hz
Power consumption (method IEC62087) 297 W (0.3 W Stand by) 249 W (0.3 W Stand by)
193 W (0.3 W Stand by)
Power consumption during wallpaper mode 64 W 46 W 42 W
Weight With Stand 66.5 kg 33.0 kg 25.5 kg
Without Stand 61.0 kg 28.5 kg 21.0 kg
Operating temperature 0 °C to e 40 °C
*1 The HDMI 2 and PC terminals can both use the same audio input terminal.
*2 If you insert any card other than the SD/SDHC (class 6 or higher), it will not work.
• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
Appendix
LC80LE960X_EN_book.indb 90LC80LE960X_EN_book.indb 90 4/4/2014 1:08:32 PM4/4/2014 1:08:32 PM
91
Appendix
Removing the stand
For wall mounting with the bracket remove the stand.
Before setting TV on the wall
• Remove the connected cables (DVD, VCR, etc.) from the
terminals.
• Before performing work, make sure to turn off the TV.
• Before performing work spread cushioning over the base area
to lay the TV on. This will prevent it from being damaged.
NOTE
• To attach the stand, perform the above steps in reverse order.
• As the TV is very heavy, be careful when moving it.
LC-70LE960X/LC-60LE960X
1Loosen the two screws used to secure the stand
cover.
2Remove the stand.
1Unfasten the four screws used to secure the stand in
place.
2Detach the stand from the TV.
LC-80LE960X
1Unfasten the screws used to secure the stand in
place.
2Detach the stand from the TV.
NOTE
• In the installation procedure, be careful not to catch your
fingers between the TV set and the floor.
LC80LE960X_EN_book.indb 91LC80LE960X_EN_book.indb 91 4/4/2014 1:08:32 PM4/4/2014 1:08:32 PM
92
Appendix
Mounting the TV on a wall
To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations on the rear of the TV,
and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
• Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
• You can ask qualified service personnel about using an optional bracket to mount the TV to a wall.
• When you mount the TV on a wall, you should attach the supporting post.
• Detach the AC cord holder on the rear of the TV before mounting the TV on a wall.
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the product. We recommend
you to contact a technician for assistance when installing it.
SHARP is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall
mount on your own.
CAUTION
• Install your wall mount on a solid wall perpendicular to the floor.
When you want to attach the wall mount to surfaces other than plaster board, please contact your nearest retailer/
adviser for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in severe
personal injury. Always have two people mount the TV on a wall.
Wall Mount Kit Specifications
Standard dimensions for wall mount kits are shown below.
c1
b3
b2
a2
a1
B
b1
A
WALL MOUNT KIT
WALL
WALL MOUNT KIT
LC-80LE960X LC-70LE960X LC-60LE960X
VESA screw hole specs (A-B) 600 — 400 400 — 400 400 — 400
Width a1 75 75 75
a2 375 275 275
Height
b1 200 200 200
b2 345 360 320
b3 145 160 120
c1 80 70 70
a1: Maximum distance from the mounting hole
a2: Maximum distance from the TV’s center
b1: Distance between the TV’s center and the mounting hole
b2: Maximum distance from the TV’s center
b3: Maximum distance from the mounting hole
c1: Minimum gap
LC80LE960X_EN_book.indb 92LC80LE960X_EN_book.indb 92 4/4/2014 1:08:33 PM4/4/2014 1:08:33 PM
93
Appendix
WALL MOUNT
UNIT
SCREW
CABINET
DEPTH OF
MOUNTING HOLES
MOUNTING
HOLES
LC-80LE960X LC-70LE960X
LC-60LE960X
Standard screws M8 M6
Length (Depth of mounting holes) 12 12
Quantity 4 pcs. 4 pcs.
NOTE
• Do not mount the TV at a tilt.
• Due to the terminal configuration on this TV, when you wall-mount this model, make sure there is enough space between the
wall and the TV for the cables.
• To use this TV mounted on a wall, remove the cable tie as needed.
• Do not use screws that do not comply with the VESA standard screw specifications.
• Do not use screws that are longer than the standard length. Screws that are too long may cause damage to the inside of the TV
set.
• Do not fasten the screws too firmly or loosely. This may damage the product or cause the product to fall, leading to personal
injury. SHARP is not liable for these kinds of accidents.
• SHARP is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
Do not install the wall mount kit while your TV is turned on. It may result in personal injury
due to electric shock.
EWall mount audio setup
When you mount the TV on a wall, you can adjust the sound to a more suitable one by setting this function to “Yes”.
Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Wall mount audio setup”.
LC80LE960X_EN_book.indb 93LC80LE960X_EN_book.indb 93 4/4/2014 1:08:33 PM4/4/2014 1:08:33 PM
94
Dimensional drawings
LC-80LE960X
400 1125
1005
1085
600
1780*1
1825 49
34*2
455
820
*1 Active area
*2 Thinnest part (except of terminal height)
NOTE
• Dimensions do not include protrusions such as screws and some parts.
Appendix
LC80LE960X_EN_book.indb 94LC80LE960X_EN_book.indb 94 4/4/2014 1:08:33 PM4/4/2014 1:08:33 PM
95
LC-70LE960X
349.5
46.5
28*2
400
858.5
1573
958
877.5
1541.5*1
400
910
LC-60LE960X
349.5
46.5
28*2
400
858.2
1370.9
836.6
757.2
1339.5*1
400
789.5
*1 Active area
*2 Thinnest part (except of terminal height)
NOTE
• Dimensions do not include protrusions such as screws and some parts.
Appendix
LC80LE960X_EN_book.indb 95LC80LE960X_EN_book.indb 95 4/4/2014 1:08:33 PM4/4/2014 1:08:33 PM
96
CLEARING THE PASSWORD
1Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Password”.
2The password input screen displays.
3Press and hold both CHr and Y+ on the TV simultaneously until the message appears on the screen.
NOTE
• To set the password again, refer to Password on page 46 and follow the instructions.
The Password is .
NOTE
• As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place.
Appendix
LC80LE960X_EN_book.indb 96LC80LE960X_EN_book.indb 96 4/4/2014 1:08:33 PM4/4/2014 1:08:33 PM
FOR LOCATION ENQUIRIES WITHIN
NEW ZEALAND
REGARDING YOUR LOCAL
SHARP CORPORATION OF NEW ZEALAND LIMITED
VISIT OUR WEBSITE AT
SHARP CUSTOMER SERVICES
TELEPHONE: 09 573 0111
FACSIMILE: 09 573 0113
FOR LOCATION ENQUIRIES WITHIN
AUSTRALIA
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
www.sharp.net.au
OR CALL SHARP CUSTOMER CARE
1300 135 022
SHARP CORPORATION OF AUSTRALIA PTY LTD
SPform019(AUGUST 2011)
(LOCAL CALL COSTS APPLY WITHIN AUSTRALIA)
SHARP APPROVED SERVICE CENTRE
www.sharp.net.nz
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
LC80LE960X_EN_book.indb 97LC80LE960X_EN_book.indb 97 4/4/2014 1:08:33 PM4/4/2014 1:08:33 PM
Printed in Malaysia
TINS-G137WJZZ
14P04-MA-NP
loss or damage. You are also entitled to have the goods repaired or replaced
LC80LE960X_EN_book.indb 98LC80LE960X_EN_book.indb 98 4/4/2014 1:08:33 PM4/4/2014 1:08:33 PM