Vaddio 535-2000-251 User Manual
Displayed below is the user manual for 535-2000-251 by Vaddio which is a product in the Video Conferencing Accessories category. This manual has pages.
Related Manuals
©2017 Vaddio - All Rights Reserved Reproduction in whole or in part without written permission is prohibited. Specifications are subject to change without
notice. Vaddio is a registered trademark of Vaddio. All other trademarks are property of their respective owners.
Document Number 411-0010-31 Rev. A
Installation Guide
Vaddio™ Thin Profile Wall Mount for Cisco Precision HD/60 and Polycom
EagleEye IV Cameras
Thin Profile Wall Mount for Precision HD/60 and EagleEye IV Cameras - Model Number 535-2000-251
Cisco Precision HD Camera
Cisco Precision 60 Camera
Polycom EagleEye IV Camera
Hardware Needed (included):
§ One (1) Thin profile wall mount
§ Four (4) #8 x 1.25 sheet metal screws
§ Four(4) EZ Anchors self drilling wall
anchors
§ One (1) ¼-20 x 1/2 in pan head screw
§ Can be mounted to 2-gang box
§ Can be mounted to display/monitor
arm
(Camera not included)
Hardware Needed (included):
§ One (1) Thin profile wall mount
§ Four (4) #8 x 1.25 sheet metal screws
§ Four(4) EZ Anchors self drilling wall
anchors
§ One (1) ¼-20 x 3/8 in pan head screw
§ Can be mounted to 2-gang box
§ Can be mounted to display/monitor
arm
(Camera not included)
Hardware Needed (included):
§ One (1) Thin Profile Wall Mount
§ Four (4) #8 x 1.25 sheet metal screws
§ Four(4) EZ Anchors – self drilling wall
anchors
§ Four (4) M3 x 6mm Screws
§ Can be mounted to 2-gang box
§ Can be mounted to display/monitor
arm
(Camera not included)
MOUNTING THE CODEC/CAMERA:
The Thin Profile Wall Mounts for the Cisco Precision HD/60 and Polycom EagleEye IV can be mounted to an electrical wall box or mounted
directly to a drywall surface with the supplied wall anchors or other spiral type wall anchors of the Integrator’s choice. This mount also features
a 75x75 VESA pattern which can be directly fastened to a compatible display/monitor mounting arm. Note: When locating the camera, consider
viewing angles, lighting conditions, line of site obstructions and check for in-wall obstructions where the camera is to be mounted. Pick a location
to optimize the performance of the camera. The integrator is responsible for attaching the camera/codec to the mount securely.
INTENDED USE:
These products were designed, built and tested for use indoors and to support the weight, size and shape of the prescribed products only. Using
these mounts for any other devices could damage that device and/or create potentially unsafe operating conditions.
HARDWARE WARRANTY:
Please see the Vaddio website at http://www.vaddio.com for the Vaddio Statement of Warranty for all Vaddio Products. The Statement of
Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service, Technical Support, Return Material
Authorizations (RMA), Voided Warranty, Shipping and Handling and Products Not Under Warranty. The Vaddio Warranty Statement supercedes
all other published warranty statements in content and coverages. Vaddio Technical Support can be contacted through the Vaddio website or
through e-mail support at mailto:support@vaddio.com.
The wall mount can be mounted
directly to the wall with wall anchors
or can be mounted directly to a 2-
gang electrical wall box.
Wall Mount comes with the proper screw(s) to attach
the camera to the mount. Note: The integrator is
responsible for attaching the camera/codec to the
mount securely.
90º Opposed slotted
mounting holes for easy
codec/camera leveling.
Camera and Electronic Products for Integrators
Rounded corners for
safety and ease of
handling.
Heavy gauge steel construction
for strength and rigidity with
durable black powder coat finish.
(paintable to match any décor)
Figure 1:
General Installation Diagram of
Mount
The wall mount can be fastened
to a display/monitor arm using
the 75x75 VESA pattern.