Vaddio 535-2100-202 User Manual

Displayed below is the user manual for 535-2100-202 by Vaddio which is a product in the Camera Brackets category. This manual has pages.

Related Manuals

Vaddio Groupstation Premier System Manual

Vaddio 535-2000-217 Manual

Vaddio 535-2000-219 Manual

Vaddio 535-2000-221 Manual

Vaddio 535-2000-232 Manual

Vaddio 535-2000-234 Manual

Vaddio 535-2000-291 Manual

Vaddio 535-2000-296 Manual

Adjustable Extension Mounting Bracket for CONCEAL Installation and User Guide 342-0395 Rev A

Adjustable Extension Wall Bracket for CONCEAL™

Part Number: 535-2100-202

For Vaddio™ WallVIEW™ HD-18, HD-19 and HD-20 Camera Systems with CONCEAL

Wall Mounting Systems:

The Adjustable Extension Wall Bracket for CONCEAL provides the ability to mount a WallVIEW HD-20, HD-19, HD-8 or

HD-USB Camera with CONCEAL Mount centered between two-LCD monitors for “eye to eye” video conferencing.

INSTALLATION AND USER GUIDE

WallVIEW HD-18

WallVIEW HD-18 DVI/HDMI

WallVIEW CCU HD-18

WallVIEW CCU HD-18 HD-SDI

WallVIEW HD-19

WallVIEW HD-19 DVI/HDMI

WallVIEW CCU HD-19

WallVIEW CCU HD-19 HD-SDI

WallVIEW HD-USB PTZ SR



WallVIEW HD-20

WallVIEW HD-20 DVI/HDMI

WallVIEW CCU HD-20

WallVIEW CCU HD-20 HD-SDI

Adjustable Extension Mounting Bracket for CONCEAL

Adjustable Extension Mounting Bracket for CONCEAL Installation and User Guide 342-0395 Rev. A Page 2 of 8

Overview:

The Adjustable Extension Wall Bracket for CONCEAL was

designed to allow the Vaddio CONCEAL Wall Mounting Systems

for the Vaddio HD-18, HD-19 and HD-20 PTZ HD Cameras to be

extended away from a wall, above or below a single wall

mounted LCD monitor or in-between two-wall mounted LCD

monitors. The aesthetic design of the Adjustable Extension Wall

Bracket for CONCEAL complements the WallVIEW HD-18, HD-

19 and HD-20 Camera Systems and conceals all cabling,

connectors and mounting hardware.

The narrow extension arm design of the Adjustable Extension Wall Bracket for CONCEAL also allows two

monitors to be closely spaced together with the Vaddio Camera centered and mounted in front of the monitors.

This mounting application also allows the Vaddio Camera to be placed in the most effective vertical position for

“eye to eye” centering for video conferencing applications. The extension arm is infinitely adjustable anywhere

from four (4) inches to eight (8) inches in length from the wall (depending on type of wall mounting installation

selected) and provides an easily adjustable custom fit of the camera to the monitor.

Intended Use:

Before operating the device, please read the entire manual thoroughly. The mount was designed, built and tested

for use indoors and to support the weight, size and shape of the Vaddio HD-18, HD-19, HD-20 and HD-USB

cameras. The use of this mount for any other heavier device could damage that device and/or create a potentially

unsafe operating condition.

Important Safeguards:

Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.

In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,

do not immerse in water or other liquids and avoid extremely humid conditions.

Save These Instructions:

The information contained in this manual will help you install and operate your product. If these instructions are

misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product

drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from

www.vaddio.com free of charge.

Unpacking:

Carefully remove the mount and all of the parts from the packaging. Unpack and identify the following parts:

 One (1) Adjustable Extension Wall Bracket for CONCEAL

 Four (4) #8 x 1.25” Screws and four (4) Drywall Anchors

 Four (4) #6-32 x 1” Phillips Machine Screws and four (4) Shoulder Washers

 Four (4) #10-32 x 3/8” Machine Screws (black), four (4) #10 Lock Washers (black) and four (4) #10-32 Nuts

(black)

 Documentation

A list of Vaddio Wall Mounts for additional cameras that can also be used with the Adjustable

Extension Wall Bracket for CONCEAL is on Page

Fig. 2: Vaddio WallVIEW HD-18, HD-19 and HD-20 Cameras with CONCEAL Wall Mounting System

Adjustable Extension Mounting Bracket for CONCEAL

Adjustable Extension Mounting Bracket for CONCEAL Installation and User Guide 342-0395 Rev. A Page 3 of 8

Mounting and Installation Instruction s for the Adjustable Extension Wall Bracke t for CONCEAL System:

 Step 1: Determine the Camera Mount Location:

When locating the camera, consider viewing angles, lighting conditions, possible line of site obstructions and

check for in-wall obstructions where the camera is to be mounted. Select a mounting location to optimize the

performance of the camera for your application. After determining the optimum location of the camera system,

route the required Cat-5e cables from the camera location to the head-end.

 Step 2: Determine the preferred Meth od of Wall Mounting:

For New Room Construction - Installation Option 1 (Allows the Adjustable Extension Bracket Arm to adjust

from 4” to 8” length):

For new construction, coordinate the installation of an electrical 2-Device Switch Box (Dimensions: 4” W x 4”H x

2-1/8” D) in the wall for the Adjustable Extension Wall Bracket for CONCEAL mounting location with the electrical

or general contractor.

 Fig 5: Remove a conduit knock-out on the bottom back side of the 2-Device Switch Box in order to make it

easier to feed excess Cat-5e cable back into the wall.

 Fig 6: The four (4) mounting holes closest to the Extension Bracket Base will align to the 2-Device Switch Box

threaded screw mounting tabs in the box.

Install the required three (3) Cat-5e cables into the 2-Device Switch Box. Provide (approx. 1.5ft.) cable length to

feed through the Extension Bracket to the Camera.

The four (4) mounting holes closest to the Extension Bracket Base are slotted (to allow leveling of the Extension

Bracket Base) and positioned to fit the 2-Device Switch Box. Use four (4) #6-32 X 1” Phillips Machine Screws

and four (4) Shoulder Washers to attach the Extension Bracket Base to the 2-Device Switch Box. Level the mount

and tighten the mounting screws. Use the two (2) Lower and two (2) Upper Set Screws to adjust and set the

desired length of the Extension Bracket Arm. (Use a 3/32” Hex Driver for the Upper and Lower Set Screws).

Hint: Adjust the Lower Set Screws first in order to keep the Adjustable Extension Bracket Arm level.

Fig 3: Adjustable Extension Wall

Bracket for CONCEAL System Fig 4: WallVIEW HD-19 Camera with CONCEAL System

mounted to the Adjustable Extension Wall Bracket for

CONCEAL

Fig.5: Conduit knock-out removed

Fig.6: Screws attached to

the 2-Device Switch Box

Adjustable Extension Mounting Bracket for CONCEAL

Adjustable Extension Mounting Bracket for CONCEAL Installation and User Guide 342-0395 Rev. A Page 4 of 8

For Direct Drywall Mounting - Installation Option 2 (Allows Extension Bracket Arm to adjust from 4” to 8”

length):

 Fig 7: Place the Extension Bracket Base into the proper installation position on the drywall, be sure it is level.

Once into position and level, mark the center position in each of the four (4) slotted mounting holes on the

outer corners furthest away from the extension bracket.

Trace the inner rectangular hole in the Adjustable Extension Bracket Base onto the drywall. Remove the

Adjustable Extension Bracket Base from the wall. Use a small saw or knife to carefully remove the traced

rectangular hole from the drywall.

Loosen (just loosen, do not remove) the Upper and Lower Set Screws on the Extension Bracket Base to adjust

the Extension Bracket to the shortest length (4 inches). Insert the extension bracket through the drywall

rectangular opening and into the wall cavity to be sure it moves freely through the hole (to the minimum 4” bracket

length). If it does not move freely through the rectangular opening, remove the bracket from the wall and trim the

rectangular opening slightly larger. Retest the Extension bracket again to verify it moves freely into the

rectangular opening. Note: Use a variable speed power drill to insert the drywall anchors.

 Fig 8: Install the required three (3) Cat-5e cables and pull the cables through the rectangular drywall opening.

Provide enough cable to feed through the Extension Bracket Arm (approx. 1.5ft.)

 Fig 9: Note: The mounting holes are slotted to allow leveling of the Extension Bracket Base. Use four (4) #8

x 1.25” Screws to attach the Adjustable Extension Wall Bracket for CONCEAL System to the Drywall anchors.

Level the mount and tighten the mounting screws.

 Use the two (2) Lower and two (2) Upper Set Screws to adjust and set the desired length of the Extension

Bracket Arm.

For Existing Rooms please use Installation Option 2 - Direct drywall mounting method above.

Fig.7: The four (4) outside mounting

holes have been marked and the

rectangular center opening has been

traced and removed from the wall.

The four (4) drywall anchors have

been inserted into the wall.

Fig.8: The three Cat-5e cables

have been installed and pulled

through the rectangular opening

in the wall.

Fig.9: The three Cat-5e cables have been

pulled through the Adjustable Extension

Mount. The mount has been attached to

the wall anchors with four (4) #8 Screws.

Adjustable Extension Mounting Bracket for CONCEAL

Adjustable Extension Mounting Bracket for CONCEAL Installation and User Guide 342-0395 Rev. A Page 5 of 8

Step 3: Attach the CONCEAL Wall Mount Bracket to the Extension Bracket Arm:

A. Pull the three (3) Cat-5e cables from the Adjustable Extension Bracket Arm through the rectangular opening

in the rear of the CONCEAL Wall Mount Bracket.

B. Attach the CONCEAL Wall Mount Bracket to the Adjustable Extension Bracket Arm with the four (4) Machine

Screws (black), four (4) Lock Washers (black) and four (4) Nuts (black) and tighten securely. Note: The

CONCEAL Wall Mount Bracket mounting holes are slotted to allow leveling of the bracket.

Step 4: Secure the Camera To the CONCEAL Wall Mount Bracket:

Please mark and test all Cat-5e cables prior to connection. Please do not connect to the camera

using the “guess/trial and error” method. Plugging the EZ POWER/VIDEO Cat. 5 Cable into the

wrong RJ-45 may cause damage to the camera and void the warranty!

A. Connect the (3) Cat-5e cables to the correct RJ-45 input connector on the WallVIEW Camera.

Note: Please! Before applying power to the camera, double-check each of the three RJ-45 connections to be sure

they are in the correct RJ-45 connector.

B. After all cables are attached to the camera, place the camera onto the camera mount and insert the two

provided 1/4”-20 x 3/8” screws into the camera through the two-screw holes in the bottom of the mount.

Note: Be sure to align each side of the camera evenly to all sides of the CONCEAL Wall Mount Bracket before

final tightening of the mounting screws (see Fig. 11).

Fig. 11: Vaddio HD-18 Camera aligned and

attached by two-(1/4-20) screws on the bottom

of the CONCEAL Wall Mount Bracket.

Fig.10: The CONCEAL Wall Mount

Bracket attached to the Adjustable

Extension Bracket Arm.

Adjustable Extension Mounting Bracket for CONCEAL

Adjustable Extension Mounting Bracket for CONCEAL Installation and User Guide 342-0395 Rev. A Page 6 of 8

Step 5: Install the CONCEAL Lo wer Cover Plate:

Attach lower CONCEAL Lower Cover Plate. Slide lower cover plate from front of the mounting bracket toward the

rear of the bracket. The two-rear locking tabs will need to be guided into position first and will lock in place as the

lower cover plate is pushed toward the rear of the mounting bracket and the front tabs are inserted (see Fig. 12).

Step 6: Install the CONCEAL Rear Camera Cover:

After successful testing of the camera, install the CONCEAL Rear Camera Cover on the CONCEAL Mounting

Bracket with the supplied screw (see Fig. 6 and 7).

List of additional Vaddio Thin Profile Wall Mounts for cameras that can also be used with the Adjustable

Extension Wall Bracket for CONCEAL:

 535-2000-216: Sony EVI-HD1

 535-2000-227: Sony EVI-HD1 PRO-CCU

 535-2000-232: Sony EVI-HD7V, EVI-HD3

 535-2000-205 and 535-2000-205B: Sony Model EVI-D70

 535-2000-204 and 535-2000-204B: Sony Model EVI-D100

 535-2000-207: Canon VC-C50i

 535-2000-222: LifeSize HD

 535-2000-234: LifeSize 10X

 535-2000-217: CISCO Precision HD

 535-2000-219: CISCO Wave II, Polycom PowerCam

 535-2000-221: Polycom Eagle Eye/Eagle Eye II

 535-2020-230: Vaddio Thin Profile Wall Mount for WallVIEW HD-USB PRO

Fig.6: CONCEAL Rear Camera Cover

Fig. 7: Completed CONCEAL Wall

Mount Camera Bracket Installation

Fig.12: CONCEAL Lower Cover Plate

with Locking Tabs

Fig. 13: CONCEAL Lower

Cover Plate locked in place

Adjustable Extension Mounting Bracket for CONCEAL

Adjustable Extension Mounting Bracket for CONCEAL Installation and User Guide 342-0395 Rev. A Page 7 of 8

Warranty Information :

Hardware* Warranty: One year limited warranty on all parts. Vaddio warrants this product against defects in

materials and workmanship for a period of one year from the day of purchase from Vaddio. If Vaddio receives

notice of such defects during the warranty period, they will, at their option, repair or replace products that prove to

be defective. Please see Vaddio’s Service Terms and Conditions at vaddio.com for specific details and policies.

Exclusions: The above warranty shall not apply to defects resulting from: improper or inadequate maintenance by the

customer, customer applied software or interfacing, unauthorized modifications or misuse, operation outside the normal

environmental specifications for the product, use of the incorrect power supply, improper extension of the power supply cable

or improper site operation and maintenance.

Vaddio Customer Service: Vaddio will test, repair, or replace the product or products without charge if the unit is under

warranty and is found to be defective. If the product is out of warranty, Vaddio will test then repair the product or products.

The cost of parts and labor charge will be estimated by a technician and confirmed by the customer prior to repair. All

components must be returned for testing as a complete unit. Vaddio will not accept responsibility for shipment after it has left

the premises.

Vaddio Technical Support: Vaddio technicians will determine and discuss with the customer the criteria for repair costs

and/or replacement. Vaddio Technical Support can be contacted through one of the following resources: e-mail support at

support@vaddio.com or online at www.vaddio.com.

Return Material Authorization (RMA) Number: Before returning a product for repair or replacement, request an RMA from

Vaddio’s technical support. Provide a technician with a return phone number, e-mail address, shipping address, and product

serial numbers and describe the reason for repairs or returns as well as the date of purchase and proof of purchase. Include

your assigned RMA number in all correspondence with Vaddio. Write your assigned RMA number on the outside of the box

when returning the product. All products returned for credit is subject to a restocking charge without exception.

Voided Warranty: The warranty does not apply if the original serial number has been removed or if the product has been

disassembled or damaged through misuse, accident, modifications, or unauthorized repair. Cutting the power supply cable

on the secondary side (low voltage side) to extend the power to the device (camera or controller) voids the warranty for that

device.

Shipping and Handling: Vaddio will not pay for inbound shipping transportation or insurance charges or accept any

responsibility for laws and ordinances from inbound transit. Vaddio will pay for outbound shipping, transportation, and

insurance charges for all items under warranty but will not assume responsibility for loss and/or damage by the outbound

freight carrier.

• If the return shipment appears damaged, retain the original boxes and packing material for inspection by the carrier. Contact

your carrier immediately.

Products Not Under Warranty: Payment arrangements are required before outbound shipment for all out of warranty

products.

*Vaddio manufactures its hardware products from parts and components that are new or equivalent to new in accordance with industry standard practices.

Other General Information:

Care and Cleaning

Do not attempt to take this product apart at any time. There are no user-serviceable components inside.

 Do not spill liquids in the product

 Keep this device away from food and liquid

 For smears or smudges on the product, wipe with a clean, soft cloth

 Use a quality lens cleaner on any lens

 Do not use any abrasive chemicals.

Operating and Storage Conditions:

Do not store or operate the device under the following conditions:

 Temperatures above 40°C (104°F) or temperatures below 0°C (32°F)

 High humidity, condensing or wet environments

 In inclement weather

 Dusty environments with lots of animal hair

 Dry environments with an excess of static discharge

 On near earth objects (lack of atmosphere)

 Under severe vibration

Adjustable Extension Mounting Bracket for CONCEAL

Adjustable Extension Mounting Bracket for CONCEAL Installation and User Guide 342-0395 Rev. A Page 8 of 8

9433 Science Center Drive, Minneapolis, MN 55428

Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464

www.vaddio.com

change without notice. Vaddio, CONCEAL and WallVIEW are trademarks of Vaddio. All other trademarks are property of their respective owners.

Document Number 342-0395 Rev. A