Vaddio 998-6906-001 User Manual

Displayed below is the user manual for 998-6906-001 by Vaddio which is a product in the AV Conferencing Bridges category. This manual has pages.

Related Manuals

Vaddio Groupstation Premier System Manual

Vaddio 535-2000-217 Manual

Vaddio 535-2000-219 Manual

Vaddio 535-2000-221 Manual

Vaddio 535-2000-232 Manual

Vaddio 535-2000-234 Manual

Vaddio 535-2000-291 Manual

Vaddio 535-2000-296 Manual

Installation and User Guide

K-

-C

T™

™

S™

™

Vaddio™ Quick-Connect DVI-D/HDMI - SR Interface for the Vaddio

HD-18 Pan/Tilt/Zoom Camera

Quick-Connect DVI/HDMI - SR Interface Used in the Following Packages

998-1105-018: Quick-Connect DVI/HDMI - SR Interface (Interface Box Only - Without Peripherals)

998-6906-000: Quick-Connect DVI/HDMI - SR Interface Kit - North America - (Camera Not Included)

998-6906-001: Quick-Connect DVI/HDMI - SR Interface Kit - International - (Camera Not Included)

999-6906-000: WallVIEW DVI/HDMI and HD-18 System - North America - Black Camera

999-6906-000W: WallVIEW DVI/HDMI and HD-18 System - North America - White Camera

999-6906-001: WallVIEW DVI/HDMI and HD-18 System - International - Black Camera

999-6906-001W: WallVIEW DVI/HDMI and HD-18 System - International - White Camera

Camera and Electronic Products for Integrators

Quick-Connect DVI/HDMI - SR Interface

Quick-Connect DVI/HDMI - SR Interface Overview

The Vaddio Quick-Connect DVI/HDMI -

SR Interface was designed and built

specifically to advance the Vaddio HD-18

camera into a wide variety of digital video

and extended control applications.

The Quick-Connect DVI/HDMI is a

perfect complement to the Vaddio HD-18

because it takes advantage of the superb

flexibility of the camera’s video system

and incorporates Vaddio’s EZCamera™

cabling system using two (2) Cat 5e

cables to transport Video, Power and

Control, to and from the camera and

interface. Simply put, these products

were designed and manufactured as a

pair from the beginning.

The active electronics built-in both the HD-18 and the Quick-Connect DVI/HDMI deliver high definition

video using high speed differential signaling (HSDS) for the video and IR signals. HSDS is at the core of

Vaddio’s Category 5 cabling systems and provides high definition video capability (up to 1080p/60) with

superior video quality over cabling distances up to 100’ (30.48m).

The Quick-Connect DVI/HDMI has many new features including simultaneous analog component video

(YPbPr) and digital video outputs (DVI-D or HDMI with the HDMI adapter cable option) on separate

connectors which is ideal for multiple monitoring and large projection systems. Extended control functions

include Daisy Chain Control Emulation (DCCE™) which allows single control port codecs to control

multiple HD-18 cameras, and IR forwarding in modulated and non-modulated formats for extending the

reach of the IR remotes included with today’s most popular videoconferencing systems.

Intended Use:

Before operating the system, please read the entire manual thoroughly. The system was designed, built

and tested for use indoors, and with the provided power supply. The use of a power supply other than

the one provided or outdoor operation has not been tested and could damage the camera and/or create a

potentially unsafe operating condition.

Save These Instructions:

The information contained in this manual will help you install and operate your system. If these

instructions are misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most

pertinent product drawings for the Vaddio product line on the Vaddio website. These documents can be

downloaded from www.vaddio.com free of charge.

Important Safeguards:

Read and understand all instructions before using. Do not operate any device if it has been dropped or

damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the

risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.

Front Panel of the Quick-Connect DVI/HDMI - SR Interface

(Optional Accessory Rack Mount Panel Available)

Rear Panel of the Quick-Connect DVI/HDMI - SR Interface (1/2

Rack Width Enclosure)

Use only the power supply provided with the Quick-Connect system. Use

of any unauthorized power supply will void any and all warranties.

Please do not use “pass-thru” or “EZ” type RJ-45 connectors. These pass-thru

type connectors do not work well for professional installations and can be the

cause of intermittent connection which usually results in the RS-232 control line

failing (locking up). For best results please use standard RJ-45 connectors for

and test all cables for proper pin-out prior to termination.

Quick-Connect DVI/HDMI - SR Interface

UNPACKING:

System Configurations - Bill of Materials:

Because the Quick-Connect DVI/HDMI - SR Interface is available in several packages, please review the

bill of materials upon receipt to ensure that all the parts are present and accounted for. The ferrite

cylinders may come in handy when this product is used in a large rack full of equipment in order to

eliminate any possible interference with other audio/video products. The ferrite cylinders are included for

the integrator’s convenience.

Quick-Connect DVI-D/HDMI – SR Interface Only

Part Number 998-1105-018

• One (1) Quick-Connect DVI/HDMI Interface Box only

• One (1) User Manual (Document Number 342-0045)

Quick-Connect DVI-D/HDMI - SR Interface Kit for the HD-18 PTZ Camera - North America

Part Number 998-6906-000 (Camera Not Included)

• One (1) Quick-Connect DVI/HDMI Interface Box

• One (1) 24VDC, 2A Switching Power Supply with AC Cord Set for North America

• User Manual (Document Number 342-0045)

• One (1) Laird Technologies 28A2432-0A2 Clamp-on Ferrite Cylinder (Wrap IR forwarding LED wires twice

before screwing stripped wire ends to 3 conductor Molex Euro Jack)

• Two (2) Laird Technologies 28A0640-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter shielded

DVI Cable at the Quick-Connect DVI end)

• One (1) Laird Technologies HFA163090-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter

shielded DVI Cable at the Monitor end).

Quick-Connect DVI-D/HDMI - SR Interface Kit for the HD-18 PTZ Cam era - International

Part Number 998-6906-001 (Camera Not Included)

• One (1) Quick-Connect DVI/HDMI Interface Box

• One (1) 24VDC, 2Amp Switching Power Supply

• One (1) AC Cord Set for Euro and One (1) AC Cord Set for UK

• User Manual (Document Number 342-0045)

• One (1) Laird Technologies 28A2432-0A2 Clamp-on Ferrite Cylinder (Wrap IR forwarding LED wires twice

before screwing stripped wire ends to 3 conductor Molex Euro Jack)

• Two (2) Laird Technologies 28A0640-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter shielded

DVI Cable at the Quick-Connect DVI end)

• One (1) Laird Technologies HFA163090-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter

shielded DVI Cable at the Monitor end).

WallVIEW DVI/HDMI HD-18 System,

Part Number 999-6906-000 North America - Black Camera Kit

Part Number 999-6906-000W North America - White Camera Kit

• One (1) HD-18 PTZ Camera 999-6900-000 (Black) or 999-6900-000W (White)

• One (1) Quick-Connect DVI/HDMI Interface Box

• One (1) 24VDC, 2A Switching Power Supply with AC Cord Set for North America

• One (1) Laird Technologies 28A2432-0A2 Clamp-on Ferrite Cylinder (Wrap IR forwarding LED wires twice

before screwing stripped wire ends to 3 conductor Molex Euro Jack)

• Two (2) Laird Technologies 28A0640-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter shielded

DVI Cable at the Quick-Connect DVI end)

• One (1) Laird Technologies HFA163090-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter

shielded DVI Cable at the Monitor end).

• One (1) 535-2000-230 Thin Profile Wall Mount with mounting hardware

• Four (4) EZ Anchors with Four (4) screws and two (2) ¼”-20 x ½” Screws

• One (1) 998-1001-232 Control Adapter (for control systems)

• One (1) 998-1002-232 Control Adapter (for TANDBERG VC systems)

• One (1) 3-pos Phoenix type connector

• User Manual - Document Number 342-0045

Quick-Connect DVI/HDMI - SR Interface

Unpacking Sy stem Configurations (continued)

WallVIEW DVI/HDMI HD-18 System,

Part Number 999-6906-001 International - Black Ca mera Kit

Part Number 999-6906-001W International - White Camera Kit

• One (1) HD-18 PTZ Camera 999-6900-001 (Black) or 999-6900-001W (White)

• One (1) Quick-Connect DVI/HDMI Interface Box

• One (1) 24VDC, 2Amp Switching Power

• One (1) AC Cord Set for Euro and One (1) AC Cord Set for UK

• One (1) Laird Technologies 28A2432-0A2 Clamp-on Ferrite Cylinder (Wrap IR forwarding LED wires twice before

screwing stripped wire ends to 3 conductor Molex Euro Jack)

• Two (2) Laird Technologies 28A0640-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter shielded DVI

Cable at the Quick-Connect DVI end)

• One (1) Laird Technologies HFA163090-0A2 Clamp-on Ferrite Cylinder (Clamp around 0.8" diameter shielded

DVI Cable at the Monitor end).

• One (1) 535-2000-230 Thin Profile Wall Mount with mounting hardware - Four (4) EZ Anchors with Four (4)

screws and two (2) ¼”-20 x ½” Screws

• One (1) 998-1001-232 Control Adapter (for control systems)

• One (1) 998-1002-232 Control Adapter (for TANDBERG VC systems)

• One (1) 3-pos Phoenix type connector

• User Manual - Document Number 342-0045

Quick-Connect DVI/HDMI – SR Interface I/O Description

Connectors:

1) Vaddio Blue LED Power Indicator: Illuminates when the 24 VDC Power supply is plugged in.

2) Power Port: 24 VDC, 2.0 Amp Power Connection, 5.5mm OD x 2.5mm ID, Positive Center

3) RS-232 Control Input: Connect to joystick controller, codec or control system to control the HD-18

Camera.

4) To Camera: RS-232 Control to & from the Camera and IR signals returned from the camera

5) Daisy Chain Control Port: Daisy Chain Control Emulation (DCCE) output to next Quick-Connect

DVI/HDMI for use when daisy chain control lines can’t be avoided.

6) IR Output Port: Non-modulated (for hard connections) and Modulated for use with IR emitters

attached to the front IR windows of the codec to be controlled.

7) DVI-D Output: High Definition Multimedia Interface (HDMI) Transmitter, HDMI (v 1.3 with deep color)

and DVI v 1.0 Compliant

8) YPbPr Output: Analog Component Video Output on DE-15F Connector, Resolutions up to 1080p/60

with monitor support

9) EZCamera Power & HD Video Port: Supplies power to camera and returns HD video from the

camera via Cat-5e. Maximum distance on the CAT-5e cable is 100’ (30.5 m).

① ②③ ④⑤ ⑥ ⑦⑨⑧

Quick-Connect DVI/HDMI - SR Interface

Quick-Connect DVI/HDMI – SR Interface Key Features:

• Integrated Design for use with the HD-18: The Quick-Connect DVI/HDMI and the HD-18 both

use high speed differential signaling (HSDS) for transmission of high definition video (up to

1080p)/60 and IR signals over Category 5 cabling. Video, Power and Control is conveyed using

only two Category 5 cables.

• Simultaneous Analog and Digital Outputs: The Quick-Connect DVI/HDMI is equipped with

both Analog (YPbPr) and Digital video outputs (DVI-D or HDMI with optional DVI-D to HDMI

adapter cable) to allow the flexibility in system design demanded by today’s best integrators.

• Daisy Chain Control Emulation - DCCE: The Quick-Connect DVI/HDMI provides for daisy

chain type control wiring, where all the wiring is done at the interface, which is perfect for use with

single control port video systems.

• IR Forwarding Feature: The IR Forwarding feature allows IR signals from Polycom® and

TANDBERG® remotes to be sent through the HD-18 to the codec’s IR interface or IR window

allowing for camera placement and system design freedom.

• No Scaler On-Board: The Quick-Connect DVI/HDMI - SR Interface does not have an internal

scaler and will not interfere with the video signal coming out of the camera. Resolutions are set

at the camera and the Quick-Connect DVI/HDMI passes through that resolution.

• Designed and Manufactured in the USA: Made in the greater Minneapolis/St. Paul

metropolitan area, New Hope, Minnesota, USA.

System Connectivity Example 1:

Basic system connectivity of a Vaddio WallVIEW™ HD-18 and Quick-Connect DVI/HDMI - SR Interface

with Vaddio ProductionVIEW™ Precision Camera Controller and Monitors

WallVIEW HD-18

HD Camera System

Quick-Connect

DVI/HDMI - SR Interface

Two (2) - Cat 5e Cables

Up to 100’ (30.48m)

232 Control

Cat 5

Power to Camera

HD Video from

Camera - Cat 5

Vaddio ProductionVIEW™ Precision Camera Controller

(Up to 7 PTZ Cameras can be controlled)

RS-232 on Cat 5

*Simulated Video Feeds

DVI or HDMI - Large Format

Monitor or Projector*

Vaddio PreVIEW

™

HD 7.0 Rack Monitors

DVI-D YPbP

Quick-Connect DVI/HDMI - SR Interface

System Connectivity Example 2: System connectivity of Vaddio HD-18 Cameras and Quick-Connect DVI/HDMI - SR

Interfaces Configured with Single Control Port Codec with Daisy Chain Control Emulation (DCCE).

General Installation Instructions:

Like all Vaddio Cat 5e cabling systems, the Quick-Connect DVI/HDMI - SR is easy to install and operate.

The HD-18 product was specifically designed with Cat 5 cable connectivity for Power, Video and

Control/IR signaling and only two Cat 5e cables are required from the Quick-Connect camera. Installation

is simplified in that no custom 8-Pin mini-din cables or expensive multi-core plenum cables are needed

and no power outlets are required near the camera bracket. All cabling is routed to the head-end using

Cat 5e cables.

Before Installing

• Locate the camera mounting position while paying close attention to camera viewing angles, lighting

conditions, possible line of site obstructions, and checking for in-wall obstructions where the camera

is to be mounted. Pick a mounting location to optimize the performance of the camera.

• Pre-wire cabling as required (see wiring diagram examples).

• The provided Thin Profile Wall Mount for the HD-18 can be mounted directly to a 2-gang wall box or

can be mounted to the drywall using the provided four (4) dry wall anchors.

Installation:

1) Use the accompanying HD-18 manual to set the switch settings for HD video out resolution, IR

frequency and output, baud rate, SD video format and shape, image orientation etc…

2) After determining the optimum location of the camera system, route the required 2 (two) Cat 5e

cables from the camera to the Quick-Connect interface located at the head-end.

Vaddio HD-18

HD Camera Systems

DVI to HDMI

Cable

Daisy Chain Link between

Quick-Connect Interfaces

DVI Cable

Computer

with DVI

Output

C60 Codec

Micro

hones

ETHERNET

DVI Cable

Single RS-232 Port Codec with

Daisy Chain Camera Control

Codec IR Remote:

Forwarded through

Main Camera for

Codec Control

RS-232 RS-232

Two (2) - Cat 5e

Cables - up to

100’

(

30.48m

)

Power to Camera

HD Video from

Camera - Cat. 5

Power to Camera

HD Video from

Camera - Cat. 5

RS-232 & IR Return Cat 5e

Two (2) - Cat 5e

Cables - up to 100’

(

30.48m

)

RS-232 & IR Return Cat 5e

HD Video Monitors*

ated

deo

eeds

Monitor 1 Monitor 2

DVI-D

HDMI

Quick-Connect

DVI/HDMI SR

Interfaces

Quick-Connect DVI/HDMI - SR Interface

3) See “Connectivity Example 1” on page 6. This is the basic two (2) Cat. 5e cable system where Power

is sent to the camera and HD Video is returned from the camera on one Cat. 5e (blue line) and RS-

232 control communication and IR feed-through is returned from the camera (dashed grey line). After

securing the mount to the wall/wall box and the camera to the mount with the supplied ¼”-20 screw.

a. Connect the first Cat 5e cable from the EZCAMERA POWER & HD VIDEO RJ-45 jack on the

Quick-Connect to the EZ POWER VIDEO RJ-45 jack on the back of the camera

b. Connect the 2nd Cat 5e cable from the RS-232 CONTROL “TO CAMERA” port to the RS-232

IN/IR OUT jack on the back of the HD-18 camera. Connect the control source (i.e. Vaddio’s

Precision Camera Controller, ProductionVIEW HD, ControlVIEW™ XHD, AutoPresenter™

etc…) to the RS-232 CONTROL INPUT.

c. Connect the DVI-D output to a DVI-D video device (or HDMI with a DVI-D to HDMI adapter

cable - sold separately) and/or connect the YPbPr output to a different video destination

device. Both the DVI-D and the YPbPr are live images at the same resolution which is set at

the camera. The only difference is that the DVI-D signal is digital and the YPbPr is analog.

Both are capable of 1080p/60Hz.

d. Check all Cat 5e cables for proper connection and check the cables for continuity in advance

of final connection. Please do not use the “feed-thru” or “EZ” type RJ-45 connectors for

professional installations (see page 3 for Important Safeguards).

Note: Plugging the EZCAMERA POWER & HD VIDEO Cat 5e cable into the wrong

RJ-45 may cause damage to the cam era system and void the warranty.

4) Connect the 24VDC, 2A power supply to the Quick-Connect and plug it into the wall once all the

connections have been checked. The camera will “HOME” to a centered position. To ensure

proper continuity of control and operation of the cameras, the RS-232 controller (control system,

codec or joystick) should be powered ON after all of the cameras.

RS-232 Cabling

For RS-232, use a standard CAT-5 cable (568B termination for RJ-45 connectors) from the RS-232 port

on the back of a Vaddio ProductionVIEW camera controller or switcher. If the camera will be connected

to a third-party control system (such as AMX® or Crestron®), a DB-9 to RJ-45 adapter cable is supplied

with the camera for RS-232.

Videoconference Codecs and RS-232

Depending on the codec that is used, and which RS-232 port is used with a codec, special DB-9 to RJ-45

adapters may sometimes be required. Refer to Vaddio’s price list or website for Tech Notes on the HD-

18 page on specific diagrams for wiring the camera to videoconference codecs.

Remember to always power up the cameras before booting up the codec.

Daisy Chain Configurations/Installation Instructions: In some cases, Daisy Chain control situations

can’t be avoided. Because of this, Vaddio added “Daisy Chain Control Emulation” or DCCE™ to the

Quick-Connect DVI/HDMI - SR Interface in order to use the HD-18 camera in these situations. See

Connectivity Example 2 (previous page) where the codec requires daisy chain control wiring.

1) For Daisy Chain control, first complete steps 1 through 3-d, since all the cabling between the cameras

and the Quick-Connect is the same.

2) Instead of running a cable from the 1st camera to the 2nd camera, run a Cat 5e patch cable from the

1st Quick-Connect interface RS-232 CONTROL DAISY CHAIN RJ-45 jack to the 2nd Quick-Connect

RS-232 CONTROL INPUT jack. Within the VISCA® like protocol that the codec and the HD-18’s

use, the 1st in the chain will set up as Camera #1 and the second will set up as Camera #2 in the

chain allowing the codec IR Remote to Select which camera it will switch to and which to control.

a. In the case of TANDBERG Codecs, the IR Modulated Output of the Quick-Connect and a

Xantech IR emitter (282D or 283D) attached to the front panel of the codec (in front of the IR

receiver).

b. Polycom Codecs with IR receivers can connect the IR Feed Through the same way as the

TANDBERG, but do not use daisy control. Several Polycom codecs can also be connected

directly with the non-modulated signal to the codec’s IR signal input port.

Quick-Connect DVI/HDMI - SR Interface

Compliance and CE Declaration of Conformity

FCC Part 15 Compliance

• This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15, Subpart B, of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation

of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his/her own expense.

• Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept

any interference including interference that may cause undesired operation of the device.

• Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the user’s authority

to operate this equipment.

ICES-003 Compliance

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio

Interference Regulations of the Canadian Department of Communications.

Le présent appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables aux appareils numeriques de

la classe A préscrites dans le Règlement sur le brouillage radioélectrique édicte par le ministère des Communications du Canada.

European Compliance

This product has been evaluated for Electromagnetic Compatibility under the EMC Directive for Emissions and Immunity and meets

the requirements for a Class A digital device. In a domestic environment this product may cause radio interference in which case

the user may be required to take adequate measures.

Standard(s) To Which Conformity Is Declared:

EMC Directive 2004/108/EC

EN 55022 A: 2006 + A1 2007 (CISPR 22:2005/A1:2005) Conducted and Radiated Emissions

EN 55024: 1998 + Amendments A1: 2001 + A2: 2003 - Electromagnetic Compatibility - Immunity

EN 61000-4-2 Electrostatic Discharge

EN 61000-4-3 Radiated Immunity

EN 61000-4-4 Electrical Fast Transients

EN 61000-4-5 Surge Immunity

EN 61000-4-6 Conducted Immunity

EN 61000-4-8 Power Frequency Magnetic Field

EN 61000-4-11 Voltage Dips, Interrupts and Fluctuations

Warranty Information:

Hardware* Warranty - One year limited warranty on all parts. Vaddio warrants this product against defects in materials and

workmanship for a period of one year from the day of purchase from Vaddio. If Vaddio receives notice of such defects during the

warranty period, they will, at their option, repair or replace products that prove to be defective.

Exclusions - The above warranty shall not apply to defects resulting from: improper or inadequate maintenance by the customer,

customer applied software or interfacing, unauthorized modifications or misuse, operation outside the normal environmental

specifications for the product, use of the incorrect power supply, improper extension of the power supply cable or improper site

operation and maintenance.

Vaddio Customer ser vice – Vaddio will test, repair, or replace the product or products without charge if the unit is under warranty

and is found to be defective. If the product is out of warranty, Vaddio will test then repair the product or products. The cost of parts

and labor charge will be estimated by a technician and confirmed by the customer prior to repair. All components must be returned

for testing as a complete unit. Vaddio will not accept responsibility for shipment after it has left the premises.

Vaddio Technical support - Vaddio technicians will determine and discuss with the customer the criteria for repair costs and/or

replacement. Vaddio Technical Support can be contacted through one of the following resources: e-mail support at

support@vaddio.com or online at www.vaddio.com.

Return Material Authorization (RMA) number - Before returning a product for repair or replacement, request an RMA from

Vaddio’s technical support. Provide a technician with a return phone number, e-mail address, shipping address, and product serial

numbers and describe the reason for repairs or returns as well as the date of purchase and proof of purchase. Include your

assigned RMA number in all correspondence with Vaddio. Write your assigned RMA number on the outside of the box when

returning the product.

Voided warranty – The warranty does not apply if the original serial number has been removed or if the product has been

disassembled or damaged through misuse, accident, modifications, or unauthorized repair. Cutting the power supply cable on the

secondary side (low voltage side) to extend the power to the device (camera or controller) voids the warranty for that device.

Quick-Connect DVI/HDMI - SR Interface

Shipping and h andling - Vaddio will not pay for inbound shipping transportation or insurance charges or accept any responsibility

for laws and ordinances from inbound transit. Vaddio will pay for outbound shipping, transportation, and insurance charges for all

items under warranty but will not assume responsibility for loss and/or damage by the outbound freight carrier.

If the return shipment appears damaged, retain the original boxes and packing material for inspection by the carrier. Contact your

carrier immediately.

Products not under warranty - Payment arrangements are required before outbound shipment for all out of warranty products.

*Vaddio manufactures its hardware products from parts and components that are new or equivalent to new in accordance with industry standard practices.

Other General Information:

Care and Cleaning

Do not attempt to take this product apart at any time. There are no user-serviceable components inside.

• Do not spill liquids or liquid type substances onto the device.

• Keep this device away from food or liquid.

• For smears or smudges on the devices, wipe with a clean, soft cloth.

• Do not use any abrasive chemicals at any time on any equipment.

Operating and Storage Conditions:

Do not store or operate the device under the following conditions:

• Temperatures above 40°C (104°F) or temperatures below 0°C (32°F)

• High humidity, condensing or wet environments

• In inclement weather

• Dusty environments

• Dry environments with an excess of static discharge

• Under severe vibration

General Specifications:

Quick-Connect DVI/HDMI - SR Interface

Part Numbers 998-1105-018: Quick-Connect DVI/HDMI - SR Interface (Interface Box Only)

998-6906-000: Quick-Connect DVI/HDMI - SR Interface Kit - North America

998-6906-001: Quick-Connect DVI/HDMI - SR Interface Kit - International

(Kit Includes Quick-Connect DVI/HDMI - SR Interface, Power Supply, AC Cord Set, Control

Adapter and Documentation)

999-6906-000: WallVIEW DVI/HDMI HD-18 System - North America (black camera)

999-6906-000W: WallVIEW DVI/HDMI HD-18 System - North America (white camera)

999-6906-001: WallVIEW DVI/HDMI HD-18 System - International (black camera)

999-6906-001W: WallVIEW DVI/HDMI HD-18 System - International (white camera)

(System Includes: Vaddio HD-18 Camera, Quick-Connect DVI/HDMI - SR Interface, Wall

Mount and Mounting Hardware, Power Supply, AC Cord Set, Control Adapter and

Documentation)

Connectors Power Connector: 5.5mm OD x 2.5mm ID

RJ-45: Four (4) Control IN, Control OUT, Daisy Chain OUT, EZCamera Power Video Port

IR: 3-Pin Phoenix type connector (Modulated, Non-modulated and GND)

Video Outputs: DVI-D (Female - Single Link), DE-15F (High Density D-Sub 15-Pin F) for HD

YPbPr

Video Resolution Up to 1080p/60 for DVI-D and YPbPr (YPbPr w/monitor support), Resolution set at HD-18

Camera

Cat. 5 Cable

Length Video, Power and Control on two (2) Cat 5e Cables - Up to 100’ (30.48m)

Power Supply 24 VDC, 2.0 Amp PowerRite (110-240V, 50/60Hz) Switching Power Supply with AC Cord Set

Dimensions ½-Rack Size, 1-RU Rack Mount - 1.72” H x 8” W x 6.751” D (4.369cm x 20.32cm x 17.15cm)

Weight 1.21 lbs. (0.548846804 kg)

Accessory

Options 1-RU Rack Mount Panel for two (2) units (side by side): PN# 998-6000-003

1m (3.3’) DVI-D Male to HDMI Male P/N: 440-5643-001

3m (10’) DVI-D Male to HDMI Male P/N: 440-5643-003

Origin Made in the USA in the Minneapolis/St. Paul Metropolitan Area, Minnesota

Quick-Connect DVI/HDMI - SR Interface

System and Configuration Notes:

Quick-Connect DVI/HDMI - SR Interface

9433 Science Center Drive, Minneapolis, MN 55428

Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464

www.vaddio.com

subject to change without notice. Vaddio, Quick-Connect, DCCE, HSDS, ProductionVIEW, PreVIEW, AutoPresenter, ControlVIEW,

ProductionVIEW, EZCamera and PowerRite are trademarks of Vaddio. All other trademarks are property of their respective owners.

Document Number 342-0045 Rev. A