Grundig GNU5E036IA User Manual
Displayed below is the user manual for GNU5E036IA by Grundig which is a product in the Dishwashers category. This manual has pages.
Related Manuals
www.grundig.com
www.grundig.com
DISHWASHER
USER INSTRUCTIONS
GNU 5E036 IA
GNU 5E036 IAX
ENG
DISHWASHER
USER INSTRUCTIONS
GNU 5E036 IA
GNU 5E036 IAX
ENG
Please read this user manual first!
Dear Customer,
Thank you for preferring a Grundig product. We hope that you get the best results
from your product which has been manufactured with high quality and state-of-the-art
technology. Therefore, please read this entire user manual and all other accompanying
documents carefully before using the product and keep it as a reference for future use.
If you handover the product to someone else, give the user manual as well. Follow all
warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.
Explanation of symbols
Throughout this User Manual the following symbols are used:
CImportant information or useful
hints about usage.
AWarning for hazardous situations
with regard to life and property.
BWarning for electric shock.
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes.
Take them to the packaging material collection points designated by the local authorities.
CONTENTS
1 INSTRUCTIONS FOR SAFETY
AND ENVIRONMENT 4
General safety ............................................... 4
Intended use ................................................... 4
Children’s safety ............................................ 5
Disposing of packaging material ................. 5
Transportation of the product ....................... 5
Compliance with WEEE Directive and
Disposing of the Waste Product ................... 6
Compliance with RoHS Directive ................. 6
Package information ...................................... 6
2 DISHWASHER 7
Overview ........................................................ 7
Fan drying system .......................................... 8
Technical specifications ................................. 8
3 INSTALLATION 9
Appropriate installation location .................. 9
Connecting water supply .............................. 9
Connection to the drain ..............................10
Adjusting the feet .........................................10
WaterProtect+ ............................................. 11
Electrical connection ................................... 11
Initial use ....................................................... 11
4 PREPARATION 12
Tips for energy saving ................................. 12
Water softening system ............................... 12
Adjusting the water softening system ......... 12
Adding salt ...................................................14
Detergent ......................................................14
Adding Liquid/Gel Detergent and Rinse
Aid ...............................................................15
Powder Detergents ......................................18
Tablet detergents .........................................18
Cutlery basket ............................................. 21
Cutlery basket ............................................. 21
Collapsible lower basket tines ....................22
Collapsible lower basket tines ....................22
SoftTouch Accessory ...................................23
Lower Basket Glass Holder.........................23
Tray Wash Supports ....................................23
Lower basket multipurpose / height
adjustable service rack ...............................24
Upper basket multipurpose service rack ...25
Upper basket height adjustable rack .........25
Lower basket bottle wire .............................25
Adjusting the height of the upper basket ...26
Height setting with empty basket ...............27
Collapsible upper basket wires ..................27
Ceiling cutlery basket ..................................28
Ceiling cutlery basket ..................................28
5 OPERATING THE
PRODUCT 29
Keys ...............................................................30
Preparing the machine ................................30
Programme selection ...................................30
Auxiliary functions .......................................33
Scheduling the washing time ......................33
Starting the programme ..............................34
Programme step follow-up ..........................34
Child Lock .....................................................35
Cancelling the programme .........................35
Changing the auxiliary function .................36
Machine settings ..........................................36
Adjusting the Rinse Aid Amount .................38
Warning messages ......................................38
End of programme .......................................39
6 HOMEWHIZ 40
HomeWhiz Setup and User Account
Settings .........................................................40
7 MAINTENANCE AND
CLEANING 43
Cleaning the outer surface of the product 43
Cleaning the interior of the machine..........43
Cleaning the filters .......................................43
Cleaning the hose filter ...............................44
Cleaning the impellers.................................44
Lower impeller assembly .............................45
Upper impeller ............................................45
8 TROUBLESHOOTING 46
4DISHWASHER / USER INSTRUCTIONS
/51 EN
INSTRUCTIONS FOR SAFETY AND ENVIRONMENT
1
This section contains safety
instructions that will help to get
protected from risk of personal
injury or property damage. Failure
to follow these instructions shall
void all warranties.
General safety
•Never place the product
on a carpet-covered floor;
otherwise, lack of airflow
beneath the product will cause
electrical parts to overheat.
This will cause problems with
your product.
•Do not operate the product
if the power cable / plug is
damaged! Call the Authorised
Service Agent.
•Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specifications” table. Do
not neglect to have the
grounding installation made
by a qualified electrician.
The manufacturer shall not be
liable for any damages that
will arise when the product
is used without grounding in
accordance with the local
regulations.
•The water supply and
draining hoses must be
securely fastened and remain
undamaged.
•Unplug the product when not
in use.
•Never wash the product by
spreading or pouring water
onto it! There is the risk of
electric shock!
•Never touch the plug with
wet hands! Never unplug by
pulling on the cable, always
pull out by grabbing the plug.
•The product must be
unplugged during installation,
maintenance, cleaning and
repairing procedures.
•Always have the installation
and repairing procedures
carried out by the Authorised
Service Agent. Manufacturer
shall not be held liable for
damages that may arise from
procedures carried out by
unauthorised persons.
•Never use chemical solvents in
the product. They bring forth
the risk of explosion.
•When you pull the upper and
lower baskets out completely,
the door of the product will
bear all the weight of the
baskets. Do not put other
loads on the door; otherwise,
the product may tilt.
•Never leave the door of the
product open apart from
loading and unloading
procedures.
•Do not to open the door of
the product when it is running
unless necessary. Be careful
for the rush of hot steam when
you open the door.
Intended use
•This product has been
designed for domestic use.
•It must be used to do the
domestic type dishes only.
DISHWASHER / USER INSTRUCTIONS 5 / 51 EN
instructions for safety and environment
•This appliance is intended
to be used in household and
similar applications such as:
- Staff kitchen areas in shops,
offices and other working
environments;
- Farm houses;
- By clients in hotels, motels
and other residential type
environments;
- Bed and breakfast type
environments
•Only dishwasher safe
detergents, rinse aids and
additives must be used.
•The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.
•The service life of your product
is 10 years. During this period,
original spare parts will be
available to operate the
product properly.
•This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical,sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and
user maintenance shall not
be made by children without
supervision.
Children’s safety
•Electrical products are
dangerous for the children.
Keep children away from the
product when it is in use. Do
not let them to tamper with the
product.
•Do not forget to close the door
of the product when leaving
the room where it is located.
•Store all detergents and
additives in a safe place away
from the reach of the children.
Disposing of packaging
material
Packaging materials are
dangerous to children. Keep
packaging materials in a safe
place away from reach of the
children.
Packaging materials of the product
are manufactured from recyclable
materials. Dispose of them
properly and sort in accordance
with recycled waste instructions.
Do not dispose of them with
normal domestic waste.
Transportation of the
product
AIf you need to move the
product, do it in upright
position and hold from
the rear side. Slanting
the product onto its front
side may cause the
electronic parts in it get
wet and damaged.
6DISHWASHER / USER INSTRUCTIONS
/51 EN
instructions for safety and environment
1. Unplug the product before
transporting it.
2. Remove water drainage and
water supply connections.
3. Drain the remaining water in
the product completely.
Compliance with WEEE
Directive and Disposing
of the Waste Product
This product complies with
EU WEEE Directive
(2012/19/EU). This product
bears a classification symbol
for waste electrical and electronic
equipment (WEEE).This product
has been manufactured with high
quality parts and materials which
can be reused and are suitable for
recycling. Do not dispose of the
waste product with normal
domestic and other wastes at the
end of its service life. Take it to the
collection center for the recycling
of electrical and electronic
equipment. Please consult your
local authorities to learn about
these collection centers.
Compliance with RoHS
Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not
contain harmful and prohibited
materials specified in the Directive.
Package information
Packaging materials of the product
are manufactured from recyclable
materials in accordance with our
National Environment Regulations.
Do not dispose of the packaging
materials together with the
domestic or other wastes. Take
them to the packaging material
collection points designated by the
local authorities.
DISHWASHER / USER INSTRUCTIONS 7 / 51 EN
DISHWASHER
2
Overview
1. Upper basket
2. Cutlery basket
3. Lower basket
4. Automatic Liquid/Gel Detergent and Rinse Aid
Dosing System
5. Type Label
6. Control panel
7. Door
8 Lower impeller
9. Salt reservoir lid
10. Filters
11. Upper impeller
12. Upper basket rail
13. Upper cutlery basket ( depends on model )
14. Upper table ( depends on model )
15. Ceiling impeller ( depends on model )
16. Fan drying system ( depends on model )
16
8DISHWASHER / USER INSTRUCTIONS
/51 EN
Dishwasher
Technical specifications
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the safety
rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input 220-240 V, 50 Hz (see rating label)
Total power consumption 1800-2100 W (see rating label)
Heater power consumption 1800 W (see rating label)
Total current (depends on the model) 10 A (see rating label)
Drain pump power consumption 30 W (see rating label)
Water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0
Mpa)
CTechnical specifications may be changed without prior notice to improve the
quality of the product.
CFigures in this manual are schematic and may not match the product exactly.
CValues stated on the markings of the product or in the printed documents
accompanying the product are obtained in the laboratory on basis of the relevant
standards. Depending on operational and environmental conditions of the
product, these values may vary.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests can be
e-mailed to the following address:
dishwasher@standardloading.com
Do not forget to provide the code, stock and serial numbers of the product to be tested in your
request e-mail along with your contact information. Code, stock and serial numbers of the
product may be found on the type label attached to the side wall of the door.
Fan drying system
(depends on model)
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan operation.
DISHWASHER / USER INSTRUCTIONS 9 / 51 EN
3INSTALLATION
Refer to the nearest Authorised Service
Agent for installation of your product. To
make the product ready for use, make sure
that the electricity, tap water supply and
water drainage systems are appropriate
before calling the Authorised Service Agent.
If they are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.
CPreparation of the location and
electrical, tap water and waste
water installations at the place
of installation is the customer's
responsibility.
BInstallation and electrical
connections must be carried out
by the Authorised Service Agent.
Manufacturer shall not be held
responsible for damages arising
from processes carried out by
unauthorised persons.
APrior to installation, visually
check if the product has any
defects on it. If so, do not have
it installed. Damaged products
cause risks for your safety.
CMake sure that the water inlet
and discharge hoses are not
folded, pinched or crushed
while pushing the product into
its place after installation or
cleaning procedures.
When placing the product, pay attention not
to damage the floor, walls, piping, etc. Do
not hold the product by its door or panel to
move it.
Appropriate installation
location
•Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be installed
on a flat surface in order for the door to
be closed comfortably and securely.
•Do not install the product at places
where temperature may fall below 0ºC.
•Place the product at least 1 cm away
from the edges of other furniture.
•Place the product on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.
BDo not place the product on the
power cable.
•Make sure that you select a location
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
•Install the product in a place close to
the tap and the drain hole. Select the
installation location by considering
that it will not be changed after the
connections are made.
Connecting water supply
CWe recommend attaching a
filter on the house/apartment
supply water inlet to protect the
machine from damages that
may arise from impurities (sand,
dirt, rust, etc.) coming from the
urban water supply system or
from your own water system as
well as to prevent complaints
such as yellowing or sludge
accumulation at the end of
washing.
10 DISHWASHER / USER INSTRUCTIONS
/51 EN
Installation
Permitted water temperature: up to
25°C
The dishwasher may not be connected to
open warm water devices or flow-through
water heaters.
•Do not use old or used water inlet hose
on the new product. Use the new water
inlet hose supplied with the product.
•Connect the water inlet hose directly
to the water tap. Pressure coming from
the tap should be minimum 0.3 and
maximum 10 bars. If the water pressure
exceeds 10 bars, a pressure relief valve
should be installed in between.
•Open the taps completely after making
the connections to check for water
leaks.
CUse a screw-on hose connector
to connect the water inlet hose
to a water tap with a ¾ inch
external thread. If required, use
a filter insert to filter deposits
from the pipes.
AFor your safety, close the water
inlet tap completely after the
washing programme is over.
Connection to the drain
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection must
be min. 50 cm and max. 100 cm from the
floor. A discharge hose longer than 4 meters
causes dirty washing.
Attach the water discharge hose to the
drainpipe without bending it. Tightly fix the
water discharge hose to the drainpipe in
order to prevent any dislocation of the water
discharge hose during operation of the
product.
min
300
min
120
max 1000
min 500
CDrainpipe must be connected to
the sewage system and it should
not be connected to any surface
water.
Adjusting the feet
If the door of the product cannot be closed
properly or if the product swings when
you push it slightly, then you need to adjust
the feet of the product. Adjust the feet of
the product as illustrated in the installation
manual supplied with the product.
ADiswashers door must be
aligned properly otherwise hot
steam can escape! Danger of
serious burns, other injury or
may damage furniture.
DISHWASHER / USER INSTRUCTIONS 11 / 51 EN
Installation
•The voltage and allowed fuse or breaker
protection are specified in the “Technical
specifications” section. If the current
value of the fuse or breaker in the house
is less than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
•The specified voltage must be equal to
your mains voltage.
•Do not make connections via extension
cables or multi-plugs.
BDamaged power cables must
be replaced by the Authorised
Service Agent.
BIf your dishwasher is equipped
with internal illumination, lamp
should only be replaced by the
Authorised Service Agent in case
of failures that may occur on the
lamp.
BIf the product has a failure, it
should not be operated unless
it is repaired by the Authorised
Service Agent! There is the risk
of electric shock!
Initial use
Before starting to use the product, make sure
that all preparations are made in accordance
with the instructions in sections “Important
safety instructions” and “Installation”.
•To prepare the product to do the dishes,
perform first operation in the shortest
programme with detergent while the
machine is empty. During the initial use,
fill the salt reservoir with 1 litre of water
prior to filling it with salt.
AThere might be a small amount
of water left in the product after
factory quality control tests. This
has no harm on the product.
WaterProtect+
(depends on model)
The WaterProtect+ system protects against
water leaks that may occur at the hose inlet.
Water contact with the valve box of the
system must be avoided to prevent damage
to the electrical system. If the WaterProtect+
system is damaged, unplug the product and
call the Authorised Service Agent.
AAs the hose set contains
electrical connections and
assemblies, never shorten or
lengthen the hose with extension
hoses.
Electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the
values in the “Technical specifications” table.
The manufacturer shall not be liable for any
damages that will arise when the product is
used without grounding in accordance with
the local regulations.
•Connection must comply with national
regulations.
•Power cable plug must be within easy
reach after installation.
BUnplug the product after the
washing programme is over.
12 DISHWASHER / USER INSTRUCTIONS
/51 EN
PREPARATION
4
Tips for energy saving
Following information will help you use the
product in an ecological and energy-efficient
manner.
Wipe away any coarse food remnants on
the dishes before putting them in the product.
Operate the product after filling it
completely.
When selecting a programme, consider
the table of "Programme data and average
consumption values".
Do not put more detergent than suggested
on the detergent package.
Water softening system
The product is equipped with a water
softening system which reduces the hardness
of incoming water. This system softens
the supply water to a level that will allow
washing the dishes with the required quality.
Dishwasher salt is used for this purpose.
Adjusting the water softening
system
Cleaning, rinsing and drying performance
of your dishwasher will increase when water
softening system is adjusted properly.
Adjust the new water hardness level
according to the Water hardness level
instruction in this booklet.
Use the test strip supplied with the product
according to the steps given below to
determine hardness level of your supply
water.
DISHWASHER / USER INSTRUCTIONS 13 / 51 EN
PreparatIon
Remove the test
strip from the
packet.
Turn on the tap and
let the water run for
about a minute.
Hold the test strip in
the water for about
a second.
Remove the test
strip from the water
and shake it.
Wait for 1 minute. The test strip shows
you the hardness
level.
After determining hardness level of the supply water:
1. Press On/Off key to turn on the machine.
2. Enter the Settings Menu by pressing the Function button d for 3 seconds.
3. By using function button b, adjust water hardness level according to the hardness of the
supply water.
See “Water hardness level adjustment table” for correct setting.
4. Exit the Settings Menu by pressing the function button d for 3 seconds.
Water Hardness Level Adjustment Table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF Water Hardness Level Indicator
0th Level 0-5 0-4 0-8 Press the function button b to set the
water hardness level to position 1.
1st Level 6-9 5-7 9-13
2nd Level 10-15 8-12 14-22 Press the function button b to set the
water hardness level to position 2.
3rd Level 16-19 13-15 23-27 Press the function button b to set the
water hardness level to position 3.
4th Level 20-24 16-19 28-34 Press the function button b to set the
water hardness level to position 4.
5th Level 25-62 20-50 35-90 Press the function button b to set the
water hardness level to position 5.
Water Hardness: 1
Water Hardness: 2
Water Hardness: 3
Water Hardness: 4
Water Hardness: 5
If the hardness level of the supply water is above 90°dF or if you are using well water, then it
is recommended to use water purification devices and special filters.
Since your machine is equipped with an Automatic Water Hardness Detection System,
appropriate salt should be put in the dishwasher when “Salt indicator” illuminates.
If salt is not put in the machine, the Automatic Water Hardness Detection System will not work
properly.
14 DISHWASHER / USER INSTRUCTIONS
/51 EN
PreparatIon
4. Add salt to the salt compartment. To
speed up dissolution rate of salt in water,
stir it with a spoon.
CYou can put about 2 kg of
softening salt into the salt
reservoir.
5. Replace the lid and tighten it when the
reservoir is full.
CYou need to add salt right before
starting the machine. Thus, the
overflowing salty water will be
flushed immediately, preventing
the risk of corrosion in machine.
In cases where you would not
start washing immediately, run
your machine empty in the
shortest program.
CSince different salt brands in the
market have different particle
sizes and since the water
hardness may vary, dissolution
of the salt in water may take
a couple of hours. Therefore,
Salt Indicator remains on for a
while after adding salt into the
machine.
Detergent
You can use powder, tablet and liquid/gel
detergent in the machine.
AOnly use the detergents
produced particularly for use
with dishwashers in the machine.
We recommend you not to use
detergents that contain chlorine
and phosphate as they are
harmful for the environment.
Your dishwasher is equipped with an
Automatic Liquid/Gel Detergent Dosing
System.
CIf your machine is equipped with
“Automatic Water Hardness
Detection System”, water
hardness adjustment will be
made by the service/user as
standard during first installation.
If you move your house, your
machine will automatically
perform water hardness level
adjustment according to the
water hardness in the new place
you have moved in.
CAdjust the water softness
level according to the "Water
hardness level instruction"
supplied with your machine.
Adding salt
CUse only special softening salts
produced particularly for the
dishwashers in your machine.
1. First take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid counter-
clockwise to open it (A).
3. Add 1 litre of water to salt reservoir of
your machine only in initial use.
DISHWASHER / USER INSTRUCTIONS 15 / 51 EN
PreparatIon
CIn addition to liquid/gel
detergents that function only
as a detergent, there are also
liquid/gel detergents that act
as rinse aid and/or soften
water. Follow the manufacturer’s
recommendations when using
these detergents.
Detergent manufacturer’s recommendations
about the amount of liquid/gel detergent to
be used are as follows:
For lightly soiled dishes 20 ml
For moderately soiled dishes 25 ml
For heavily soiled dishes 30 ml
CSome gel-type detergents may
not be suitable for automatic
dosing as they are highly
viscous. Apply this type of
detergents onto the inner
surface of the dishwasher’s
door or directly into the
dishwasher, paying attention
to the recommendations of the
detergent manufacturer.
Adding Liquid/Gel Detergent
and Rinse Aid
The Automatic Liquid/Gel Detergent Dosing
system is found on the door of your
dishwasher.
1
2
Thanks to this system, the amount of rinse
aid and liquid/gel detergent required for
the selected washing programme is adjusted
automatically.
CPlease read the information
given in section “Operating
the Product” to activate or
deactivate the Automatic
Liquid/Gel Detergent Dosing
adjustment.
CWhen the Automatic Liquid/Gel
Detergent function is enabled,
the Automatic Liquid/Gel
Detergent indicator on the panel
will light up if there is liquid/gel
detergent in the detergent box.
If there is little or no detergent in
the detergent box, the indicator
will flash.
CWhen the Automatic Liquid/
Gel Detergent indicator starts to
flash, there is enough detergent
for at least 5 washing cycles.
•Factory settings of the Automatic
Liquid/Gel Detergent Dosing
System are based on the detergent
amount recommended by detergent
manufacturers.
•You can proceed to the Settings menu
to change the Automatic Liquid/Gel
Detergent Dosing setting according
to your habits, or according to the
recommendations by the detergent
manufacturer if you are using a different
liquid/gel detergent.
CPlease follow the instructions
given in section “Operating the
Product” to change the settings
of the Automatic Liquid/Gel
Detergent Dosing System and
Rinse Aid.
16 DISHWASHER / USER INSTRUCTIONS
/51 EN
PreparatIon
Using the Automatic Liquid/Gel
Detergent Dosing System
In order to use the Automatic Liquid/Gel
Detergent Dosing function, select Automatic
Liquid/Gel Detergent Dosing function on the
control panel.
When the function is active, its indicator
comes lit and the system uses appropriate
amount of detergent and rinse aid in each
washing program.
CPress the key again to cancel the
function.
CWhen automatic liquid/gel
detergent dosing function is
selected, do not use other
types (powder, tablet, etc) of
detergents.
If you want to use another type of detergent
while the automatic liquid/gel detergent
dosing system is full, cancel the automatic
liquid/gel detergent dosing function on the
control panel. Then you can use powder,
tablet or liquid/gel detergent.
CUse only liquid/gel detergent
suitable for the dishwasher.
ADo not mix different brands of
liquid/gel detergents.
CDo not fill the liquid/gel
detergent box with liquids or
chemical cleaners (vinegar,
bleacher etc.) other than liquid/
gel detergent.
CLiquid/gel detergents that lost
their fluidity and became firm
must not be used in automatic
liquid/gel detergent dosing
system.
After fully opening the door of the
dishwasher, open the decorative cover as
shown with arrows 1 and
A
B
C
D
2. Open the cover shown with (A) in the
picture and add rinse aid. Open the cover
shown with (B), add liquid/gel detergent
and close the covers.
CThe indicator marked with (C) on
your machine informs you about
the liquid/gel detergent level in
the box.
CThe indicator marked with (D) on
your machine informs you about
the rinse aid level in the box.
CWipe clean any spilled rinse aid
outside the reservoir. Otherwise,
it will cause foaming in the next
washing cycle, reducing the
washing performance of the
product.
CThe rinse aid used in dishwashers
is a special product that is
recommended to increase drying
efficiency and prevent water
or lime stains on the washed
items. For this reason, care must
be paid to have rinse aid in the
rinse aid reservoir and to use
rinse aids produced specially for
dishwashers only.
DISHWASHER / USER INSTRUCTIONS 17 / 51 EN
PreparatIon
Liquid/gel detergents must be used in a
short time once they have been unpacked.
Unpacked liquid/gel detergents may lose
their fluidity in time.
CWhen the detergent warning
lamp gives a warning, it will go
away in a short while after you
add liquid/gel detergent. If the
warning light is still on after a
washing cycle, you can remove
the detergent cartridge, shake it
a few times and reinstall it.
This may occur because of the
blockage of the warning gauge
due to the detergent residues
remained in the cartridges after
a long term use.
To avoid this, it is recommended
to clean the detergent cartridge
thoroughly once in two or three
months.
You can soak it in lukewarm
water, and you can can wash
with tap water.
This way, dosing problems
caused by accumulated
detergent residues, as well
as blockage of the warning
mechanism is prevented and it
is ensured that the system works
properly.
CIf a different brand or type
of liquid/gel detergent will
be used, make sure previous
detergent is depleted completely
and then remove and clean the
liquid/gel detergent tank under
tap water.
CFill the rinse air box only with
rinse aid, and the detergent box
only with liquid/gel detergent.
If you fill it inappropriately,
immediately remove the boxes,
empty them and clean under
running water.
Installing/Removing the Liquid/Gel
Detergent and Rinse Aid Box
Top remove the rinse aid and detergent
boxes, push and lift the system cover on both
sides as shown with arrows 1 and 2 and
open.
1
21
Lift and remove the rinse aid box (A).
AB
1
2
Move the detergent box (B) in the direction
of the arrow (1) and lift to remove (2). Once
the cleaning or filling procedure is complete,
follow the above steps in reverse order to
re-install the detergent and rinse aid boxes.
18 DISHWASHER / USER INSTRUCTIONS
/51 EN
PreparatIon
Powder Detergents
CYou can find the correct amount
of powder detergent for the
selected programme in the
table "Programme Data and
Consumption Values".
CYou can apply powder
detergent onto the cover of the
dishwasher or directly into the
machine.
CTo use powder detergents, go to
the Settings menu to disable the
Automatic Liquid/Gel Detergent
Dosing System and if any, the
Tablet Detergent function.
CPowder detergents must be
used with programmes without
Prewash. See Programme Data
and Consumption Values.
CUse powder detergent in short
programmes without prewash
since the solubility of the tablet
detergent changes depending on
the temperature and time.
Tablet detergents
Table detergents exhibit water softening and
/ or rinse aid effect in addition to detergent
effect. Some types of these detergents also
contain special-purpose washing chemicals
such as glass and stainless steel protectors.
CTablet detergents give satisfying
results only under certain usage
conditions. The best washing
performance in dishwashers is
obtained by using detergent,
rinse aid and water softening salt
individually.
A
CPlace the tablet detergent into
the Tablet Detergent Box found
on the upper basket of the
dishwasher (A).
CWhen using tablet detergents,
you can use the Tablet Detergent
Function to improve the drying
performance of the dishwasher
(based on model).
Tablet detergent types commonly found on
the market:
2in1: Contains detergent, rinse aid or water
softening salt
3in1: Contains detergent, rinse aid and
water softening salt
4in1: Contains glass protectors in addition
to detergent, rinse aid and water softening
salt
5in1: Contains glass and stainless steel
protectors in addition to detergent, rinse aid
and water softening salt
CWhen using tablet detergents,
follow the manufacturer's
instructions on the packaging.
CContact the detergent
manufacturer if your dishes
are wet and/or if you notice
limescale spots particularly on
your glasses after the washing
programme is over when using a
tablet detergent.
DISHWASHER / USER INSTRUCTIONS 19 / 51 EN
PreparatIon
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest
level and perform an empty run.
3. After the empty washing cycle, review
the user manual and readjust the water
hardness level so as to suit the water
supply.
4. Make the appropriate rinse aid settings.
Items not suitable for washing in the
dishwasher
•Never wash dishes soiled by cigarette
ash, candle remnants, polish, dyestuff,
chemicals, etc. in your dishwasher.
•Do not wash silverware and cutlery
with wooden or bone stems, glued
pieces, or pieces that are not resistant
to heat, as well as copper and tin-
plated containers in the dishwasher.
CDecorative prints of chinaware
as well as aluminum and silver
items may get discoloured or
tarnished after washing in the
dishwasher just as it happens
in handwashing as well. Some
delicate glass types and crystals
may become dull in time. We
strongly recommend you to
check if the tableware you are
going to purchase is suitable
for washing especially in the
dishwasher.
Placing the dishes into the
dishwasher
You can use your dishwasher in the optimum
way with respect to energy consumption and
washing and drying performance only if you
place the dishes in an orderly way.
•Wipe away any coarse food remnants
(bones, seeds, etc.) on the dishes
before placing them in the dishwasher.
•Place thin, narrow pieces in the middle
sections of baskets if possible.
•Place the heavily soiled and bigger
items in the lower basket and smaller,
delicate and light items in the upper
basket.
•Place the hollowed dishes such as
bowls, glasses and pans upside down
in the dishwasher. Thus, accumulation
of water in deep hollows is prevented.
ATo prevent possible injuries,
always place the sharp and
pointed dishes such as service
fork, bread knife, etc. upside
down so as their pointed ends
will face down or they will lie
horizontally in the dish basket.
Unload dishes in the lower basket first and
then the dishes in the upper basket.
20 DISHWASHER / USER INSTRUCTIONS
/51 EN
PreparatIon
Suggestions for loading the dishwasher
Lower basket
Upper basket
Improper Loading Of Dishware
Improper Loading Of Dishware
DISHWASHER / USER INSTRUCTIONS 21 / 51 EN
PreparatIon
Cutlery basket
(depends on model)
Cutlery basket is designed to wash your
dishes such as knife, fork, spoon, etc. in an
efficient manner.
Since the cutlery basket can be moved (A,
B), you can create more space while placing
your dishes in the lower basket and free up
space for your dishes of different sizes.
Cutlery basket
(depends on model)
Cutlery basket is designed to wash your
dishes such as knife, fork, spoon, etc. in an
efficient manner.
Since the cutlery basket can be moved (A,
B), you can create more space while placing
your dishes in the lower basket and free up
space for your dishes of different sizes..
22 DISHWASHER / USER INSTRUCTIONS
/51 EN
PreparatIon
Collapsible lower basket tines
(depends on model)
There are foldable tines (A) located at the
lower basket of the machine are designed
for an easier placement of large pieces such
as pans, bowls, etc. You can create larger
spaces by folding each tines individually or
all of them at once.
To bring the collapsible tines into horizontal
position, grab the tines from mid position and
push them in the directions of arrows (B). To
bring the tines back to vertical position, just
lift them up. Collapsible tines will click into
the latch again (C).
CBringing the tines to the
horizontal position by holding
them from the tips may cause
them to bend. Therefore, it will
be appropriate to bring the tines
in the middle to horizontal or
vertical position by holding them
from their stems and pushing in
the direction of arrow.
Collapsible lower basket tines
(depends on model)
There are foldable tines (A) located at the
lower basket of the machine are designed
for an easier placement of large pieces such
as pans, bowls, etc. You can create larger
spaces by folding each tines individually or
all of them at once.
To bring the collapsible tines into horizontal
position, grab the tines from mid position and
push them in the directions of arrows (B). To
bring the tines back to vertical position, just
lift them up. Collapsible tines will click into
the latch again (C).
CBringing the tines to the
horizontal position by holding
them from the tips may cause
them to bend. Therefore, it will
be appropriate to bring the tines
in the middle to horizontal or
vertical position by holding them
from their stems and pushing in
the direction of arrow.
DISHWASHER / USER INSTRUCTIONS 23 / 51 EN
PreparatIon
Lower Basket Glass Holder
(depends on model)
Lower Basket Glass Holder found in the
lower basket of your machine enables a safe
washing for your oversized and tall glasses.
Tray Wash Supports
(depends on model)
Use the supports to wash trays in the bottom
basket.
See the Auxiliary functions section for
appropriate programme and function
selection.
SoftTouch Accessory
(depends on model)
The SoftTouch Accessory found in the lower
basket of your machine enables a safe
washing for your fragile glasses.
24 DISHWASHER / USER INSTRUCTIONS
/51 EN
PreparatIon
Lower basket multipurpose /
height adjustable service rack
(depends on model)
This accessory located at the lower basket
of your machine allows you to easily wash
pieces such as extra glasses, long ladles and
bread knives.
CYou may use the racks as
required by moving them to
lower or upper position, or close
them to create a wider space in
your lower basket.
AMake sure that the impeller does
not touch the dishes you placed
on the racks.
To close the racks:
1. Fold the rack (A).
2. Slide the rack up (B).
3. Put the rack in vertical position (C).
4. Slide the rack down and lock it by the
tabs (D).
CYou may open the racks in the
same process in reverse order.
To adjust the height of the racks:
1. Fold the rack (E).
2. Slide the rack up (F).
3. Open the rack at the desired level (G).
DISHWASHER / USER INSTRUCTIONS 25 / 51 EN
PreparatIon
Lower basket bottle wire
(depends on model)
The bottle wire is designed for easier
washing of long pieces with wide mouths.
You may take out the bottle wire from the
basket when not in use by pulling it out from
both sides (H).
Upper basket height
adjustable rack
(depends on model)
Use the lower and upper parts of the height
adjustable racks in the upper basket of
the machine by sliding them down or up
according to the heights of the glasses, cups
or etc. (A, B, C).
Upper basket multipurpose
service rack
(depends on model)
This accessory located at the upper basket
of your machine allows you to easily wash
pieces such as extra long ladles and bread
knives.
You can lift up the upper basket multipurpose
service rack to remove it if you do not want
to use it.
If you want to use the upper basket
multipurpose service rack again, you can
easily attach it to the side section of your
upper basket.
26 DISHWASHER / USER INSTRUCTIONS
/51 EN
PreparatIon
Adjusting the height of the
upper basket
(depends on model)
The upper basket height adjustment
mechanism has been designed for you to
create large spaces in the lower or upper
sections of your machine depending on your
needs by adjusting the height in the upper or
lower direction while your basket is empty or
loaded.
Thanks to this mechanism, you can use your
basket in three different positions, namely
lower, middle and upper positions (1, 2, 3).
1. To raise your basket, hold the upper
basket wires with both hands while the
basket is in the lowermost position and
pull them up (A).
2. You will hear a "Click" from the right
and left mechanisms, indicating that
the basket has reached the next level.
Release the basket.
Repeat the process if the height is not
sufficient.
1
2
3
To lower the basket, while it is in the
uppermost position;
1. Hold the upper basket wires with both
hands, slightly lift up the basket and
simultaneously push and release the
latches shown in the figure (B).
2. Lower the basket from its current position
to the lower one.
3. Release the basket after it has reached
one level down.
Repeat the process if the height is not
sufficient.
1
2
3
CThe movement mechanism may
not function properly if the
upper basket is overloaded or
if the weight distribution is not
balanced. In heavier conditions,
there is the risk of falling one
level down.
CMake sure that the adjustment
mechanism has the same
positions on the right and left
sides of the upper basket.
DISHWASHER / USER INSTRUCTIONS 27 / 51 EN
PreparatIon
Collapsible upper basket wires
(depends on model)
You can use collapsible wires when you
need a larger space for your dishes in the
upper basket of your machine.
To bring the collapsible wires into horizontal
position, grab the wire from the middle
position and push them in the direction of
arrow in the figure. Place your larger dishes
into the area created. To bring the wires
back to vertical position, just lift them up.
CBringing the wires to the
horizontal position by holding
them from the tips may cause
them to bend. Therefore, hold
the wires from their stems while
bringing them to the horizontal
or vertical positions.
Height setting with empty
basket
(depends on model)
In this model, the height setting of the upper
basket may be changed using the wheels
which are mounted at two different heights.
Release the latches on both the right and left
tracks of the upper basket by pushing them
outwards.
Pull the basket out completely.
Place the basket back into the tracks at the
desired height.
Push the latches back into the correct
position.
28 DISHWASHER / USER INSTRUCTIONS
/51 EN
PreparatIon
Ceiling cutlery basket
(depends on model)
Ceiling cutlery basket is designed to wash
your cutlery items such as forks, spoons and
etc. by placing them between the bars on the
basket.
1
In models with partial movement feature,
pushing the bar (1) on the handle enables
the central tray of the basket to get to the
lower position and the system gets unlocked.
Thus right and left side trays can be used as
moving parts.
The free space enabled by the side trays
allows long parts to be loaded in the upper
basket.
When the central tray is in the lower position,
you can load long/high items such as coffee
cups, ladles, etc. on the tray. When the side
trays lean on two side walls, the handle can
be pulled to allow the central tray to rise and
the system to be locked.
Ceiling cutlery basket
(depends on model)
Ceiling cutlery basket is designed to wash
your cutlery items such as forks, spoons and
etc. by placing them between the bars on the
basket.
DISHWASHER / USER INSTRUCTIONS 29 / 51 EN
OPERATING THE PRODUCT
1. On/Off key
2. Program Selection key
3. Function keys
a)
b)
c) Child lock /
d) Settings Menu /
4. Time Delay key
5. Start/Pause/Cancel key
6. Display
7. Programme indicator
8. Rinse Aid ( ) / Salt ( ) / Water Cut-off ( ) Warning indicators
9. Display information line
10. Function Selected indicator
11. Function Selectable indicator
12. Child lock indicator
13. Delay Time indicator
14. Start ( ) / Pause ( ) indicator
5
Express Function
Steam Shine Function
TurboWash Function
HomeWhiz
30 DISHWASHER / USER INSTRUCTIONS
/51 EN
Operating the Product
Keys
On/Off key
It is used to switch on or off the machine.
Press On / Off key for 1 second to switch
on. A signal will be heard and machine will
be switched on at the end of 1 second. Press
the On / Off key for 1 second to switch
off. A signal will be heard and machine
will be switched off at the end of 1 second.
When you press and hold the On/Off
key for 3 seconds while the programme is
running, "Switching off 3", "Switching off
2", "Switching off 1" will be displayed on
the information line and the machine will be
switched off with the end melody.
Machine will be switched on with the
economy programme in the On mode and
the number of the economy programme will
appear on the programme indicator. In the
Off mode, indicators on the display will turn
off.
Start / Pause / Cancel key
It is used to start, pause or cancel a selected
programme or function.
Programme Selection key
They are used to select the washing
programme you determined from the table of
Programme data and average consumption
values. Use up arrow to switch to the next
programme, and down arrow to switch to
the previous one. It returns to beginning or to
end after the first and last programs.
Function keys
Using auxiliary functions enable you to save
time, water and energy and to perform a
more comfortable washing with conditions
specific to you.
Time delay key
It should be pressed to make the time delay
settings.
Preparing the machine
1. Open the door of the dishwasher.
2. Place the dishes in accordance with the
instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent into
the detergent compartment.
5. Check if the Salt and Rinse Aid
indicators light and add salt and/or
rinse aid if needed.
6. Close the door of the dishwasher.
Programme selection
1. Press On/Off key for 1 second to switch
on your machine.
2. Refer to the table of "Programme data
and average consumption values"
to determine a washing programme
suitable for your dishes.
3. Press Programme Selection key until the
number of the programme you selected
appears on the Programme indicator.
DISHWASHER / USER INSTRUCTIONS 31 / 51 EN
Operating the Product
12345678910
Auto All-in-Wash HygieneCare Intensive Eco * GlassCare QuickWash Mini Prewash Downloaded
Program
40 ºC-65 ºC - 70 ºC 70 ºC 50 ºC 40 ºC 60 ºC 35 ºC - -
It determines
the soiling
degree of the
dishes and sets
the temperature
and amount of
the washing
water as well as
the washing
time
automatically. It
is suitable for all
dish types.
It is the most
suitable
washing
programme for
daily mixed
dishes including
plastic items.
While delicate
glass items are
washed in the
upper basket,
pans and trays
can be washed
in the lower
basket.
Using this would
be appropriate
to wash heavily
soiled dishes
left for a long
time and when
extra hygiene is
needed
especially to
wash baby stuff.
It is suitable for
heavily soiled
pans and trays.
It is suitable for
washing the
normally soiled
left daily dishes
in the most
economical way.
Special
programme for
gentle cleaning
of delicate
glassware.
It is the daily
washing
programme to
wash the
normally soiled
left dishes in the
fastest way.
It is suitable for
quickly washing
the lightly soiled
dishes that
have undergone
precleaning
process.
It is suitable to
remove the
rough remnants
on the dishes to
be left in the
dishwasher. It
also prevents
odour formation
inside the
machine.
Please see the
table on the
other page for
programmes
you can
download
through wireless
connection.
Medium to high
Medium High High Medium Low Medium Low - -
++++++- -+-
++++++++- -
+++++++- - -
110-173 202 160 170 279 120 58 30 15
9,4-12,4 19 18 16,8 9,9 13,6 10,6 10,8 4
0,90-1,45 1,53 1,80 1,51 0,84 1,20 1,18 0,80 -
Programme Table
The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions. * Reference
programme for testing institutes. The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and
using the test programme.
Programme number
Programme name
Cleaning temperature
Degree of Soiling
Energy (kWh)
Prewash
Wash
Dry
Duration (min)
Water (I)
#
Sensitivity: Public
32 DISHWASHER / USER INSTRUCTIONS
/51 EN
Operating the Product
123
DailyWash SilentWash SelfCare
65 ºC 50 ºC -
Daily washing programme for
normally soiled dishes.
It is the daily washing programme to
wash the normally soiled left dishes
in the most silent way.
This programme is
recommended to be
operated on every 1-2
months for machine
cleaning and
necessary hygiene.
The programme
should be operated
while the machine is
empty.
In order to achieve
an efficient result
use together with
special machine
Medium Medium -
-+-
++-
++-
110-173 203 160
9,4-12,4 19 18
0,90-1,45 1,53 1,80
Degree of Soiling
Energy (kWh)
Prewash
Wash
Dry
Duration (min)
Water (I)
Download Cycle
Programme number
Programme name
Cleaning temperature
#
Sensitivity: Public
DISHWASHER / USER INSTRUCTIONS 33 / 51 EN
Operating the Product
Auxiliary functions
Washing programmes of your dishwasher
are designed to obtain the best cleaning
effect, considering the type of the soil, soiling
degree and properties of the dishes to be
washed.
Auxiliary functions are provided in order to
enable you to save time, water and energy
and to perform a more comfortable washing
with conditions specific to you.
CAuxiliary functions may cause
changes in the programme
duration.
CAuxiliary functions are not
suitable for all washing
programmes. Indicator of the
auxiliary function that is not
compatible with the programme
will not be active.
To add auxiliary function to the
programme:
1. Select the desired washing programme
by pressing the programme selection
key.
2. In the selected washing programme, if
auxiliary function is selected, its symbol
will be displayed on the screen. If the
function button is pressed again the
symbol will disappear and selection is
cancelled.
3. Selection will be cancelled when you
press the function key again.
Express Function
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
Steam Shine Function
It provides superior drying performance.
TurboWash Function
This function operates the lower impeller
with a higher pressure and higher speed to
enable a better washing for dishes such as
pans and trays with stubborn, dried soiling.
Scheduling the washing time
Time Delay
If an economical electricity tariff is applied
in your region, you can use the time
delay function to wash your dishes during
appropriate hours.
You can delay the start time of the selected
programme up to 24 hours. Time delay
cannot be set after the programme has
started.
1. Press the time delay key after selecting
the washing programme and other
auxiliary functions.
2. Once you press the time delay key,
Display Information Line will show
"0:00" and the Time Delay indicator will
start flashing.
3. Time will increase with increments of 30
minutes up to 6 hours and after that in
1 hour increments up to 24 hours every
time you press the key.
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
CFloor illumination is activated
automatically when the washing
programme starts and remains lit
until the end of the programme.
CFloor illumination cannot be
cancelled by the user.
34 DISHWASHER / USER INSTRUCTIONS
/51 EN
Operating the Product
4. Press Start / Pause / Cancel key to
start countdown for the time delay. The
time delay indicator and the Start /
Pause indicator will light continuously
until the end of the period. The Display
Information Line will show a countdown.
Selected programme will start as soon
as the countdown is over.
Changing the settings while the time
delay is active
While the time delay function is activated,
you cannot make changes in the washing
programme, auxiliary functions or the
duration of delay time.
CProgramme and auxiliary
functions cannot be set/changed
after the programme has started.
CWhen you press the key without
canceling the time delay
function, “Time Delay On”
warning will be displayed.
To cancel the time delay function
1. Hold and press the Start / Pause /
Cancel key for 3 seconds.
2. When the Start / Pause / Cancel
key is pressed and hold, "Cancel 3",
"Cancel 2", "Cancel 1" appear on the
Display Information Line. At the end of
the cancellation process, time delay
indicator will turn off and delaying
process will be cancelled.
CYou can select and start a new
programme after the cancellation
of time delay function.
CTime delay function cannot be
set after the programme has
started.
Starting the programme
To start your machine after selecting the
programme and auxiliary functions, press
Start / Pause / Cancel key.
When the programme is started, Start /
Pause indicator ( ) flashes. "Programme
Started" appears on the Display Information
line for 3 seconds.
CYour machine performs
water softening depending
on the hardness level of the
mains water. Remaining time
displayed towards the end of
the programme can be different
from the time indicated at the
beginning due to this process.
The total duration can also
change while the programme
is running depending on the
ambient temperature where your
machine is installed, temperature
of the mains water and amount
of the dishes.
CPay attention not to open the
door of the machine when it is
running. Stop the machine by
pressing Start / Pause / Cancel
key if you have to open the
door. Then, open the door of
the machine. There may be a
rush of vapour when you open
the door of your machine; be
careful. Close the door and press
Start/Pause/Cancel key again.
Programme will resume running.
Programme step follow-up
You can follow-up the washing step in which
the current programme is in from the Display
Information line messages as well as from
the remaining time.
DISHWASHER / USER INSTRUCTIONS 35 / 51 EN
Operating the Product
Messages related to Washing, Rinsing and
Drying steps will be displayed respectively
on the Display Information line while the
selected programme is running. Programme
step is shown as left aligned and the
remaining time is shown as right aligned. This
screen and bar screen alternate in every 10
seconds.
CAfter the rinsing step the machine
will wait silent in pause mode for
some time in order to have the
water remaining in the machine
and on the dishes drained
completely and to have the
water softener cleaned, and then
it will resume running in drying
mode.
Child Lock
You can prevent other people from affecting
and changing the programme flow and time
delay while the machine is running.
To activate the child lock:
1. Press and hold the Child lock key for
three seconds.
2. An audible signal will be heard when
the child lock key is pressed for the first
time. If you hold the key pressed, "Child
lock: 3", "Child lock: 2", "Child lock:
1", Child lock: On" will appear on the
Display Information line. If any key other
than the On/off key is pressed while the
child lock is active, "Child lock: On" will
appear on the Display Information line
along with a warning sound.
CChild lock prevents the selected
programme or functions from
being changed and disables the
Start / Pause / Cancel key.
CChild lock does not lock the door
of the machine.
CIf you switch your machine off by
using On/Off key at the end of
the programme, the child lock will
be deactivated automatically.
To cancel the child lock:
1. Press and hold the Child lock key for 3
seconds.
2. When the Child lock key is pressed and
hold for a long time, "Child lock: 3",
"Child lock: 2", Child lock: 1" and "Child
lock: Off" will appear on the Display
Information line.
Cancelling the programme
1. Press and hold the Start / Pause /
Cancel key for 3 seconds to cancel the
programme.
2. When the Start / Pause / Cancel key is
pressed and hold, "Cancel 3", "Cancel
2", "Cancel 1" will appear on the
Display Information line.
3. When the cancelling process starts,
"Cancelling..." will appear on the
Display Information line and once the
process is completed, "Cancelled"
message will be shown on the Display
Information line. The machine will
perform the operations necessary for
the programme cancellation for a few
minutes.
CYou can select and operate
a new programme after the
cancellation of the programme.
36 DISHWASHER / USER INSTRUCTIONS
/51 EN
Operating the Product
CThere might be residues of
detergent or rinse aid left in the
machine and/or on the pieces
being washed depending on the
step in which the programme has
been cancelled.
Changing the auxiliary
function
You must cancel the programme first in
order to change the auxiliary functions after
the programme has started. Then you can
select and start a new programme and new
functions.
Machine settings
You can use the "Settings Menu" to restore
factory settings or change the settings for
"Water Hardness", "Volume", "Brightness",
"Language", and Additional functions you
will use on your machine.
To enter the settings menu:
1. Switch on the machine by pressing the
On / Off key.
2. Enter the "Settings Menu" by pressing
and holding the Settings Menu key for 3
seconds.
3. "Settings 3", "Settings 2", "Settings 1"
will appear on the Display Information
line and you will enter the Setting Menu
after 3 seconds.
4. After entering the "Settings menu", press
the Child lock key to go to the next
menu, or press the Settings menu key to
return to the previous menu.
5. Use the Function a key (see. Section
5, Operating the Appliance) to make
changes in the menus. Changes
that have been made are saved
automatically.
CYou will be asked for your
approval when changes are
made in "Language" or " Factory
Settings?" menus.
6. After making changes in the "Language"
setting or in the "Factory Settings?"
menu, press either the Child lock key or
the Settings menu key in order the save
these changes. Following message will
be displayed upon pressing the key.
7. Press Function b key (see. Section 5,
Operating the Appliance) to save the
changes. You will enter the next settings
menu and the changes will not be saved
if you press Function a (see. Section
5, Operating the Appliance) without
making changes in the menu.
8. Press and hold the Settings menu key for
3 seconds to exit the "Settings Menu".
9. "Exit settings 3", "Exit settings 2", "Exit
settings 1" will appear on the Display
Information line and you will exit the
Settings Menu after 3 seconds.
CTime Delay and Start / Pause
/ Cancel keys do not have any
function in the "Settings Menu".
Pressing these keys has no effect.
Adjusting the Water Hardness
You must adjust the "Water Hardness" level
to one of the following values that suits the
properties of your water mains.
DISHWASHER / USER INSTRUCTIONS 37 / 51 EN
Operating the Product
1. Lime-free
2. Very slightly limy
3. A little limy
4. Mediocre limy
5. Limy
6. Very much limy
Inner Illumination
When you enable this function, internal
illumination lamp will light every time you
open the door of your machine. There are
two options, namely "On" and "Off" for this
function. It is set to "Off" at the factory. (This
feature may not be available depending on
the model you have purchased.)
Doormatic
When you enable this function, the door of
your machine will be opened automatically
at the end of the washing programme.
Thus, the drying efficiency is increased and
energy saving is provided. There are two
options, namely "On" and "Off”. It is set to
"On" at factory. (This feature may not be
available depending on the model you have
purchased.)
AIf the Doormatic is enabled, the
door of the machine will open
automatically within 2 minutes at
the end of the washing process.
The lock mechanism prevents the
door from being closed within
the next 1 minute. Do not try to
close the door during this period.
CDo not unload your machine
for 30 minutes after the door
has opened automatically. Thus,
you will obtain a better drying
performance.
ADo not stand in front of the door
while it is opening.
When you switch "Doormatic" feature
to Off position, it will be disabled for all
programmes.
If you want to enable it again, switch the
"Doormatic" feature back to "On" position
again after entering in the "Settings menu".
Volume setting
Select one of the following levels for the
volume setting:
1. High
2. Low
Brightness
You can adjust screen brightness to a level
between 1 and 3.
Language
1. Use Function b key (see. Section 5,
Operating the Appliance) to select the
desired language.
2. You will see the following message
when you press Function a (see Section
5, Operating the Appliance) or the
Settings menu key to save the selected
language.
38 DISHWASHER / USER INSTRUCTIONS
/51 EN
Operating the Product
3. Press Function b key (see Section 5,
Operating the Appliance) to save the
change, or press Function a (see Section
5, Operating the Appliance) to exit the
language menu without saving.
Factory Settings?
Proceed as indicated below to cancel all of
your personal settings and restore the factory
settings:
1. Press Function b key (see. Section 5,
Operating the Appliance) Following
message will be displayed upon
pressing the key.
2. Press Function b key (see Section 5,
Operating the Appliance) to save the
change, or press Function a (see Section
5, Operating the Appliance) to exit the
menu without saving.
Warning messages
Your machine will give you some important
feedbacks while it is running.
Check the filter
Take out and clean your filters as explained
in the "Maintenance and cleaning" section
when you get a 'check the filter' warning.
If there is water remained in the tank, ensure
that the water in the tank is discharged by
applying Programme cancelation process.
If water cannot be discharged, clean any
leftover deposits that have piled up in the
bottom of the tank and blocked the water
path.
Clean the interior of your machine and the
tank by running a prewash programme without
detergent or a long washing programme with
detergent based on the degree of dirtiness.
Salt indicator ( )
Please check the salt indicator on the display
to see whether there is adequate amount of
softening salt in the dishwasher or not. You need
to refill the salt reservoir with salt whenever
salt indicator appears on the display of your
machine.
Rinse Aid indicator ( )
Please check the no rinse aid indicator on
the display to see whether there is adequate
amount of rinse aid in the dishwasher or not.
You need to refill the rinse aid dispenser with
rinse aid whenever the ‘no rinse aid’ warning
symbol lights.
Adjusting the Rinse Aid
Amount
To enter the Settings menu:
1. Press On / Off button to switch on the
machine.
2. Press and hold the Settings Menu for 3
seconds to enter the “Settings Menu”.
3. “Settings 3”, “Settings 2”, “Settings
1” will be displayed on the Display
Information row and you will enter the
Settings Menu in 3 seconds.
4. In the “Settings Menu”, press the Child
Lock key to go to the next main menu
and press the Settings Menu key to go
to the previous main menu.
5. To make changes in the menus, press
Function a key (see Chapter 5,
Operating the Product). Changes will be
saved automatically.
1. Level - Rinse aid is not used
2. Level - 1 dose of rinse aid is dispensed
3. Level - 2 doses of rinse aid is dispensed
4. Level - 3 doses of rinse aid is dispensed
5. Level - 4 doses of rinse aid is dispensed.
DISHWASHER / USER INSTRUCTIONS 39 / 51 EN
Operating the Product
CRinse aid warning will go
off automatically once the
programme is started.
Water Cut-off indicator ( )
Water Cut-off warning indicator will light
when the machine cannot take in water and
"No water!" warning is displayed on the
Display Information line. When the water is
supplied again, the warning light will turn off
automatically.
AMake sure that the water is
not cut-off and the tap is not
closed when the Water Cut-off
warning light is illuminated. Call
Authorised Service Agent if
water is not cut-off and the tap is
open.
Call service
Please call the service when you see this
warning on the Display Information line. It
is possible that your machine has taken in
plenty of water due to various reasons.
End of programme
Once the washing programme is over,
"Program over" will be displayed on the
Display Information line.
Press and hold the On/Off key for 1 second
to switch off the machine.
CFor energy saving, the machine
is automatically switched off
following the completion of
the programme or when the
programme is not started.
CLeave your dishes in the machine
for about 15 minutes after they
are washed in order to have
them cooled. Your dishes will dry
in a shorter time if you leave the
door of your machine ajar during
this period. This process will
increase the drying effectiveness
of your machine.
40 DISHWASHER / USER INSTRUCTIONS
/51 EN
6HOMEWHIZ
You can check your dishwasher and learn
about its status via your smart device with the
HomeWhiz function.
CYou can use your machine via
your smart device while the
HomeWhiz function is selected.
You can monitor your machine
through the application when the
function is not selected.
CYou can check if the HomeWhiz
function is enabled or disabled
by checking the function
indicator located on the key.
Function frame on the key will
be dim in cases where the
HomeWhiz function cannot be
enabled. For example, when the
wireless connection setting is off
or the door of the machine is
open.
CThe function will be disabled
when the door of the dishwasher
is open or when operations
regarding On/Off are
performed on the machine. It
can be enabled again with the
HomeWhiz key.
HomeWhiz Setup and User
Account Settings
Install the HomeWhiz application from the
application store of your smart device to use
the WLAN function of your machine.
Make sure that your smart device is
connected to the internet to use the
application.
If you are using the application for the first
time, complete the registration process with
your e-mail address on the application.
Once you've completed the registration
process, you can use all HomeWhiz-
supported appliances in your house through
this account.
You can tap "Add/Remove Appliance"
under the "Appliances" section to see the
appliances paired with your account. You
can perform the user pairing processes of
these appliances from this page.
Initial setup
1 Tap "Add/Remove Appliance" section
on the HomeWhiz application.
2 Tap "Tap here to setup a new
appliance".
3. Press Function b key (see Section 5,
Operating the Appliance) to change
"HomeWhiz Setup: OFF" setting to ON
from the settings menu of the dishwasher.
Tap Next.
4. Then go to the settings of your smart
device and connect to "HomeWhiz-
Dishwasher-xxxx" network from Wi-Fi
networks. Password of the network can
be seen on the HomeWhiz application.
5. Connect your smart device to the
"HomeWhiz" network and return to
the HomeWhiz application. On the
application, you can see the dishwasher
you are adding. Tap Next to proceed to
the next step.
6. Select the network to which you want to
connect your dishwasher and enter the
password.
7. You can see flashing while the
dishwasher gets connected to the
selected network, and remain on when
the connection is established.
8. Once your dishwasher is connected
to the selected network, you need to
connect to the same network on your
smart device. If your smart device does
DISHWASHER / USER INSTRUCTIONS 41 / 51 EN
HomeWhiz
not get connected automatically, go to
its settings and connect it to the network
to which your dishwasher is connected.
9. Return to the HomeWhiz application
and give a name to your dishwasher.
This is the last step. You can now see
the appliance you have added on the
"Appliances" page.
10. You can exit the settings menu of your
dishwasher and continue using it.
Using the dishwasher on more than
one device
You can use your dishwasher on more than
one smart device. Install the HomeWhiz
application on the other smart device to use
this feature. You need to log in with your
account upon launching the application.
CIf the account you have logged
on is the one to which you have
added appliance(s) before, you
can start using your dishwasher
directly after logging in.
Follow the steps below to use an already
setup dishwasher through a new account.
1. Create a new account and use this
account to log into the HomeWhiz
application. Make sure that your smart
device and dishwasher are connected to
the same network.
2. Tap "Add/Remove Appliance" on the
Appliances page. You can see the
appliance and the user it belongs to
under "Other Appliances" tab.
3. Tap (+) next to the dishwasher you
want to add and give a name to the
appliance.
4. Your request to add the appliance will
be sent to its owner via e-mail. You can
start to use the appliance jointly once
the owner confirms your request.
CYour smart device and
dishwasher do not need to be
connected to the same network
once the setup processes are
complete. You can use your
appliance as long as your
smart device is connected to the
internet.
CYou can tap "Add/Remove
Appliance" under the
"Appliances" section to see the
appliances paired with your
account. You can perform the
user pairing processes of these
appliances from this page.
CIn order to disable the WLAN
feature, turn off the "WLAN:
ON" setting by pressing the
Function b key (see. Section
5, Operating the Appliance).
When you enable it again, your
machine will connect to the
home network by using the setup
settings you made before.
Deleting HomeWhiz settings
1. Go to "Delete HomeWhiz Linking" from
the Settings menu.
2. Press Function b key (see. Section 5,
Operating the Appliance). "Deleting
Linking?" will be displayed upon
pressing the key.
3. Press Function b key (see Section 5,
Operating the Appliance) to save the
change, or press Function a (see Section
5, Operating the Appliance) to exit the
menu without saving.
3. "Deleting…" will be displayed when
you press confirm. "Deleted" will be
displayed when the network information
and account settings have been deleted,
42 DISHWASHER / USER INSTRUCTIONS
/51 EN
HomeWhiz
and "Could not delete" will be displayed
when the deletion process has failed.
CAfter you perform this operation,
you will not be able to use the
HomeWhiz function of your
dishwasher until you perform
setup again.
HomeWhiz troubleshooting
Follow these instructions if you encounter a
control or connection problem. If it persists,
take the next step.
1. Check if your smart device is connected
to the internet.
2. Close the HomeWhiz application on
your smart device and start it again.
3. Restart your smart device.
4. Go to the settings menu of your
dishwasher and check the wireless
connection status. If you see "WLAN:
Off", switch it to "WLAN: On" and wait
for the machine to connect. Then close
the HomeWhiz application on your
smart device and start it again.
5. If the connection cannot be established
following the instructions above,
repeat the initial setup settings on the
appliance.
6. If the problem persists, contact the
authorised service.
To change the Downloaded Program:
•Connect to your product on the
HomeWhiz application.
•Turn on the Remote Control function for
the product.
•Go to the settings page of the product on
the HomeWhiz application.
•On the settings page of the product,
proceed to the Download Program page.
•On the Download Program page, select a
program to download on your product.
•Select the desired program on the
Download Program page, and press
Download Program on the HomeWhiz
application.
•While the program is being downloaded,
you will see an animation on the program
and HomeWhiz application.
•Once the download procedure is
complete, you can select and install the
Downloaded Program on the product or
the HomeWhiz application.
CYou can check the Table of
Program Data and Average
Consumption values to see the
programs you can download on
your product.
CIf you download another
program on the product, your
previous selection will be
cancelled.
CYou can download as many
programs as you wish on
the product, and change the
Downloaded Program whenever
you want. You just need to make
sure that your smart device and
product are connected to the
internet and the Remote Control
function of the product is turned
on.
Changing the Downloaded Program
You can use the HomeWhiz application to
change the Downloaded Programme, which
is the last program on the product.
You can check the Table of Program Data
and Average Consumption Values
to see what the downloaded programs might
be and the default Downloaded Program.
DISHWASHER / USER INSTRUCTIONS 43 / 51 EN
MAINTENANCE AND CLEANING
7
Service life of the product extends and
frequently faced problems decrease if it is
cleaned at regular intervals.
AUnplug the product and turn off
the tap before attempting any
cleaning procedures.
CDo not use abrasive substances
for cleaning.
CClean the filter and impellers at
least once a week in order for
the machine operates efficiently.
Cleaning the outer surface of
the product
Wipe the outer surface and door gaskets
of the product gently with a mild cleaning
material and damp cloth. Wipe the "Control
panel" only with a slightly damp cloth.
Cleaning the interior of the
machine
•Clean the interior of the machine and
the tank by running a programme with
or without detergent based on the
degree of soil.
•If water has remained in the machine,
drain the water by performing the
procedures under the topic "Canceling
a programme". If the water cannot
be discharged, remove the filters as
specified in the "Cleaning the filters"
section and check if there are any
leftover deposits that have accumulated
at the bottom of the machine, blocking
the water path. Clean if necessary.
Cleaning the filters
Clean the filters at least once a week in
order for the machine operates efficiently.
Check if food residues are left on the filters.
If there are food residues on filters, take them
out and clean well under running water.
1. Turn the micro filter (1) and coarse filter
(2) assembly counter clockwise and pull
it out from its seating.
2. Pull out the metal/plastic filter (3) from
the seating.
3. Press the two pawls on the coarse filter
inwards and separate the coarse filter
from the assembly.
44 DISHWASHER / USER INSTRUCTIONS
/51 EN
Maintenance and cleaning
4. Clean all three filters under tap water by
means of a brush.
5. Place the metal/plastic filter.
6. Place the coarse filter into the micro
filter. Make sure that it is properly
seated. Turn the coarse filter clockwise
until a "click" sound is heard.
CDo not use the dishwasher
without filter.
CIncorrect placement of the filters
will reduce washing efficiency.
Cleaning the hose filter
Damages on the machine that may be
caused by impurities coming from the urban
supply water or your own water installation
(such as sand, dirt, rust, etc.) can be
prevented by means of the filter attached to
the water inlet hose. Check the filter and the
hose regularly and clean them if necessary.
1. Turn off the tap and remove the hose.
2. After taking out the filter, clean it under
running tap water.
3. Place the cleaned filter back to its seat in
the hose.
4. Install the hose to tap.
(depends on model)
Cleaning the impellers
Clean the impellers for the machine to work
efficiently.
ADo not try to rotate the impeller
by holding its ends. Trying to
rotate the end sections may
cause the gear system within the
impeller to break.
DISHWASHER / USER INSTRUCTIONS 45 / 51 EN
Maintenance and cleaning
Upper impeller
Check if the holes on the upper impeller (1)
are clogged. If they are clogged, remove
and clean the impeller. Turn its nut to left to
remove the upper impeller.
Make sure that the nut is tightened well when
installing the upper impeller.
Lower impeller assembly
CIf the washing performance
decreases, check if the holes on
the lower impeller assembly are
clogged. If they are clogged,
remove and clean the impeller
assembly.
C
To remove and clean the lower impeller
assembly together, hold by one hand from
the (C) points shown in the figure and pull up
to remove. After cleaning, follow these steps
in reverse order to reinstall the impeller
assembly.
CIf the washing performance
decreases, check if the impeller
rotates properly. To check, rotate
the impeller assembly from the
central par.
If the lower impeller assembly
hits anywhere within the machine
and does not rotate, make sure
that the impeller is properly
locked.
To lock the impeller, fix the part shown with
(A) by your hand, hold the impeller (B) from
the central part and rotate it anti-clockwise
until locked.
A
B
46 DISHWASHER / USER INSTRUCTIONS
/51 EN
8TROUBLESHOOTING
Machine does not start.
• Power cable is unplugged. >>> Check if the power cable is plugged in.
• Fuse is blown. >>> Check the fuses in your house.
• Water is cut. >>> Make sure that the water inlet tap is open.
• Door of the machine is open. >>> Make sure that you have closed the door of the
machine.
• On / Off button is not pressed. >>> Make sure that you have turned on the machine by
pressing the On / Off button.
Dishes are not washed clean
• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the
user manual.
• Selected programme is unsuitable. >>> Select a programme with a higher temperature
and cycle time.
• Impellers are stuck. >>> Prior to starting the programme, turn the lower and upper
impellers by hand to make sure that they rotate freely.
• Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged with
food remnants such as lemon pips. Clean the impellers regularly as illustrated in section
“Cleaning and Care”.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly
as illustrated in section “Cleaning and Care”.
• Filters are installed incorrectly. >>> Check the filter system and make sure that it is
installed correctly.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
• Detergent is stored under unsuitable conditions. >>> If you are using powder detergent,
do not store the detergent package in humid places. Keep it in a closed container if
possible. For ease-of-storing, we recommend you to use tablet detergents.
• Detergent is not sufficient. >>> If you are using powder detergent, adjust the amount of
detergent according to the soiling degree of your dishes and/or programme definitions.
We recommend you to use tablet detergents for optimum results.
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
• Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser lid is
closed tightly after adding detergent.
Dishes are not dry at the end of cycle
• Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no
water will accumulate in them.
DISHWASHER / USER INSTRUCTIONS 47 / 51 EN
Troubleshooting
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
• Machine is unloaded right after the programme is over. >>> Do not unload your machine
right after washing process is completed. Slightly open the door and wait for evacuation
of the steam inside for a while. Unload the dishes after the pieces cool down to a
touchable level. Start unloading process from the lower basket. Thus, dropping of water
remained on a piece at upper basket onto the pieces at lower basket is prevented.
• Selected programme is unsuitable. >>> Since rinsing temperature is low at programmes
with short duration, drying performance will also be low. Select programmes with longer
duration for a higher drying performance.
• Surface quality of the kitchen utensils is deteriorated. >>> Desired washing performance
can not be obtained on kitchen utensils with deteriorated surfaces and it is not suitable
to use such utensils in terms of hygiene as well. Also, water can not flow easily on
deteriorated surfaces. It is not recommended to wash such kitchen utensils in dishwasher.
CIt is normal that drying complaints can be experienced with Teflon kitchen
utensils. It is associated with the structure of Teflon. Since the surface tensions of
Teflon and water are different, water droplets will remain as beads on the Teflon
surface.
Tea, coffee or lipstick stains remain on dishes.
• Selected programme is unsuitable. >>> Select a programme with a higher temperature
and cycle time.
• Surface quality of the kitchen utensils is deteriorated. >>> Tea and coffee stains or other
dye spots may not be cleaned in dishwasher when they have penetrated in deteriorated
surfaces. Desired washing performance can not be obtained on kitchen utensils with
deteriorated surfaces and it is not suitable to use such utensils in terms of hygiene as well.
It is not recommended to wash such kitchen utensils in dishwasher.
• Detergent is stored under unsuitable conditions. >>> If you are using powder detergent,
do not store the detergent package in humid places. Keep it in a closed container if
possible. For ease-of-storing, we recommend you to use tablet detergents.
Lime traces remain on dishes and glassware gains a misty appearance
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
• Water hardness setting is low or salt level is insufficient >>> Measure the hardness of the
supply water appropriately and check the water hardness setting.
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while
adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling
process. Run the prewash programme to remove the salt that spilled inside the machine.
Since the salt granules that will remain under the lid will dissolve during prewash, causing
the lid loosen, check the lid once again at the end of the programme.
48 DISHWASHER / USER INSTRUCTIONS
/51 EN
Troubleshooting
There is a different odour in the machine
CA new machine has a peculiar odour. It will fade out after a couple of washes.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly
as illustrated in section “Cleaning and Care”.
• Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going to start the
machine right after you have put the dishes into it, remove the remnants on the dishes and
run the Prewash programme without detergent every 2 days. In such cases, do not close
the door of the machine completely in order to avoid odour build up in machine. You can
also use commercially available odour removers or machine cleaners.
Rust, discoloration or surface deterioration occurs on dishes
• Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal surfaces.
Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that
the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash
programme to remove the salt that spilled inside the machine. Since the salt granules that
will remain under the lid will dissolve during prewash, causing the lid loosen, check the
lid once again at the end of the programme.
• Salty food remnants have remained on dishes for a long time. >>> If cutlery soiled with
such foods will be kept waiting in machine, dirt must be removed by prewash or dishes
must be washed without being kept waiting.
• Electric installation is not grounded. >>>Check if your machine is connected to the actual
grounding line. Otherwise, the static electric created in the product causes arcs on the
surfaces of metal items creating pores, removing the protective cover on the surface and
causing discoloration.
• Intensive cleansers such as bleaches are used. >>> Protective cover on metal surfaces
gets damaged and looses its efficiency in time when it gets in contact with cleansers such
as bleach. Do not wash your dishes with bleach.
• Metal items particularly knives are used for purposes other then their intended uses.
>>> Protective cover on the edges of knives may get damaged when they are used for
purposes such as opening cans. Do not use metal kitchen utensils out of their intended
uses.
• Cutlery are made of low quality stainless steel. >>> Corrosion on such items is inevitable;
they should not be washed in dishwashers.
• Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust on a
corroded item can migrate to other stainless steel surfaces and cause corrosion on those
surfaces as well. Such items should not be washed in dishwashers.
DISHWASHER / USER INSTRUCTIONS 49 / 51 EN
Troubleshooting
Detergent remains in detergent dispenser.
• Detergent dispenser was damp when adding detergent. >>> Make sure that the
detergent dispenser is dried well prior to filling it with detergent.
• Detergent is added long before the washing process. >>> Pay attention to add detergent
shortly before start-up of the washing.
• Opening of the detergent dispenser lid is prevented during washing. >>> Place the dishes
in a way that will not prevent the detergent dispenser lid from opening and the water
going into the machine from impellers.
• Detergent is stored under unsuitable conditions. >>> If you are using powder detergent,
do not store the detergent package in humid places. Keep it in a closed container if
possible. For ease-of-storing, we recommend you to use tablet detergents.
• Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged with
food remnants such as lemon pips. Clean the impellers regularly as illustrated in section
“Cleaning and Care”.
Decorations and ornaments on kitchen utensils are being erased.
CDecorated glasses and decorated lustre porcelains are not suitable for washing in
the dishwasher. Manufacturers of some glassware and porcelain tableware items
do not recommend washing such kitchen utensils in the dishwashers either.
Dishes are scratched.
CKitchen utensils that contains or are made of aluminium should not be washed in
dishwasher.
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while
adding salt. Spilled salt can cause scratches. Make sure that the salt reservoir lid is tightly
closed after finishing the filling process. Run the prewash programme to remove the salt
that spilled inside the machine. Since the salt granules that will remain under the lid will
dissolve during prewash, causing the lid loosen, check the lid once again at the end of
the programme.
• Water hardness setting is low or salt level is insufficient >>> Measure the hardness of the
supply water appropriately and check the water hardness setting.
• Dishes are not placed orderly in the machine. >>> When placing the glasses and other
glassware into the basket lean them not against other dishes but the edges or racks of
the basket or the glass support tines. Striking of the glasses to each other or to other
dishes due to the impact of water during washing can cause breaks, or scratches on their
surfaces.
50 DISHWASHER / USER INSTRUCTIONS
/51 EN
Troubleshooting
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.
• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when
adding rinse aid.
• Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the
supply water appropriately and check the water hardness setting. If your supply water is
soft (<5 dH), do not use salt. Choose programmes that wash in higher temperatures (e.g.
60-65°C). You can also use glass protective detergents that are commercially available.
Foam forms in the machine.
• Dishes are washed with hand-wash detergent by hand but not rinsed before placing them
into the machine. >>> Hand-wash detergents do not contain antifoam. There is no need to
hand-wash the dishes before placing them into the machine. Removing the coarse soil on
the dishes under tap water, with a tissue paper or fork will be sufficient.
• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse
aid is not spilled in the machine when you are filling it. Clean any spilled rinse ait with the
help of a tissue paper/towel.
• Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid
reservoir is closed after adding rinse aid.
Kitchen utensils are broken.
• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the
user manual.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
Water remains in the dishwasher at the end of the programme.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly
as illustrated in section “Cleaning and Care”.
• Discharge hose is clogged/blocked. >>> Check the discharge hose. If necessary, remove
the discharge hose, clear the blockage and insert is as illustrated in the user manual.
CIf you cannot eliminate the problem although you follow the instructions in this
section, consult your dealer or the Authorised Service Agent. Never try to repair
a nonfunctional product yourself.
18 7357 0100_AA_GRUNDIG_C5P_EN/ 18-12-18.(17:34)
www.grundig.com
www.grundig.com