Philips PQ205/16 User Manual
Displayed below is the user manual for PQ205/16 by Philips which is a product in the Men's Shavers category. This manual has pages.
Related Manuals
Electromagnetic elds (EMF)
This Philips appliance complies with all
standards regarding electromagnetic elds
(EMF). If handled properly and according
to the instructions in this user manual, the
appliance is safe to use based on scientic
evidence available today.
Preparing for use
Inserting the batteries
The appliance operates on two R6 AA
1.5-volt alkaline batteries. Preferably insert
new Philips alkaline batteries to get optimal
shaving performance.
Make sure that your hands are dry when
you insert the batteries.
1 Remove the lid of the battery
compartment (Fig. 3)
2 Place two batteries in the battery
compartment (Fig. 4).
Note: Make sure the + and - indications on
the batteries match the indications in the
battery compartment.
Note: The shaver does not work if the
batteries have been placed incorrectly.
3 Put the lid of the battery
compartment back onto the appliance.
First place the top part of the lid (1)
and then press down the bottom part
until you hear a click (2) (Fig. 5).
How to avoid damage due to
battery leakage
- Do not expose the appliance to
temperatures higher than 35°C.
- Remove the batteries if you are not
going to use the appliance for a month
or more.
- Do not leave empty batteries in the
appliance.
Shaving time
Two new Philips alkaline batteries offer a
shaving time of 60 minutes.
Using the appliance
1 Remove the protection cap.
2 Press the on/off slide to unlock it
and push it upwards to switch on the
shaver (Fig. 6).
The on/off slide has an integrated switch
lock to prevent accidental switching on of
the shaver.
ENGLISH
Introduction
Congratulations on your purchase and
welcome to Philips! To fully benet from
the support that Philips offers, register your
product at www.philips.com/welcome.
General description (Fig. 1)
1 Protection cap
2 Shaving heads
3 Shaving unit
4 Retaining frame
5 Central spring of retaining frame
6 Release button
7 Hair chamber
8 On/off slide
9 Lid of battery compartment
10 Philips Cleaning Spray (HQ 110)
(Optional)
11 Cutter
12 Guard
13 Cleaning brush
Important
Read this user manual carefully before you
use the appliance and save it for future
reference.
Warning
- Keep the appliance dry.
- This symbol means: Forbidden to clean
with water (Fig. 2).
- This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
- Children should be supervised to
ensure that they do not play with the
appliance.
Caution
- Use and store the appliance at a
temperature between 5°C and 35°C.
- Remove the batteries from the
appliance if you are not going to use it
for a month or more.
- Use Philips batteries to achieve optimal
shaving performance.
- Only use the cleaning brush supplied.
- Make sure the cleaning brush remains
clean.
3 Move the shaving heads over your
skin. Make both straight and circular
movements (Fig. 7).
Note: Shave on a dry face only. Do not use the
shaver in combination with gel, foam or water.
Note: Your skin may need 2 or 3 weeks to get
accustomed to the Philips shaving system.
4 Push the on/off slide downwards to
switch off the shaver.
5 Clean the shaver after every
shave, see chapter ‘Cleaning and
maintenance’.
6 Put the protection cap on the shaver
after use to prevent damage and to
avoid dirt accumulation in the shaving
heads (Fig. 8).
Cleaning and maintenance
Never use scouring pads, abrasive cleaning
agents or aggressive liquids such as petrol
or acetone to clean the appliance.
Clean the shaver after every shave to
guarantee better shaving performance.
For the best cleaning result, we advise you
to use Philips Cleaning Spray (HQ110).
Ask your Philips dealer for information.
Note: Philips Shaving Head Cleaning Spray
(HQ110) may not be available in all countries.
Contact the Customer Care Centre in your
country about the availability of this accessory.
After every shave: shaving unit
and hair chamber
1 Switch off the shaver.
2 Clean the top of the appliance with
the cleaning brush supplied (Fig. 9).
3 Press the release button (1) and pull
the shaving unit a straight up off the
shaver (2) (Fig. 10).
4 Clean the inside of the shaving unit
with the cleaning brush (Fig. 11).
5 Clean the hair chamber with the
cleaning brush (Fig. 12).
6 Put the shaving unit back onto the
shaver (Fig. 13).
PQ208, PQ207, PQ206, PQ205,
PQ203, PQ202
Register your product and get support at
www.philips.com/welcome
4222.002.5270.3
1
23 4
56 7
8 9 10
11 12 13
14 15 16
17 18 19
20 21 22
23 24 25
Every two months: shaving heads
Note: Do not use cleaning agents or alcohol
to clean the shaving heads. Only use Philips
Cleaning Spray (HQ110).
1 Switch off the shaver.
2 Press the release button (1) and pull
the shaving unit straight up off the
shaver (2) (Fig. 10).
3 To remove the retaining frame,
push the sides of the central spring
towards each other (1). Then lift the
retaining frame out of the shaving unit
(2) (Fig. 14).
4 Slide the shaving heads out of the
retaining frame. Remove and clean
one shaving head at a time. Each
shaving head consists of a cutter and a
guard (Fig. 15).
Note: Do not clean more than one cutter and
guard at a time, since they are all matching
sets. If you accidentally mix up the cutters
and guards, it may take several weeks before
optimal shaving performance is restored.
5 Remove the guard from the
cutter (Fig. 16).
6 Clean it with the short-bristled side of
the cleaning brush. Brush carefully in
the direction of the arrows (Fig. 17).
7 Clean the guard with the long-bristled
side of the cleaning brush (Fig. 18)
8 Put the cutter back into the guard
after cleaning (Fig. 19).
9 Slide the shaving heads back into the
retaining frame. (Fig. 20)
10 Put the retaining frame back into the
shaving unit (‘click’) (Fig. 21).
11 Put the shaving unit back onto the
shaver (Fig. 13).
Storage
Keep the appliance dry.
Use and store the appliance at a
temperature between 5°C and 35°C.
1 Switch off the shaver.
2 Put the protection cap on the shaver
after use to prevent damage and to
avoid dirt accumulation in the shaving
heads (Fig. 22).
Replacement
Replace the shaving heads every two years
for optimal shaving results.
Replace damaged or worn shaving heads
with Philips shaving heads only (HQ4+ for
China or HQ56 for the rest of the world).
For instructions on how to remove the
shaving heads, see chapter ‘Cleaning and
maintenance’, section ‘Every two months:
shaving heads’.
Accessories
To retain the top performance of your
shaver, make sure you clean it regularly
and replace its shaving heads at the
recommended time.
Shaving heads
- We advise you to replace your shaving
heads every two years. Always replace
them with Philips shaving heads only
(HQ4 for China or HQ56 for the rest
of the world) (Fig. 23).
Cleaning
- Use Philips Cleaning Spray (HQ110) to
clean the shaving heads thoroughly.
Environment
- Do not throw away the appliance
with the normal household waste at
the end of its life, but hand it in at an
ofcial collection point for recycling.
By doing this, you help to preserve the
environment (Fig. 24).
- Batteries contain substances that
may pollute the environment. Do
not throw away batteries with the
normal household waste, but dispose
of them at an ofcial collection point
for batteries. Always remove the
batteries before you discard and hand
in the appliance at an ofcial collection
point (Fig. 25).
Guarantee and service
If you need service or information or if
you have a problem, please visit the Philips
website at www.philips.com or contact
the Philips Consumer Care Centre in your
country. You nd its phone number in the
worldwide guarantee leaet. If there is no
Consumer Care Centre in your country, go
to your local Philips dealer.
Guarantee restrictions
The shaving heads (cutters and guards)
are not covered by the terms of the
international guarantee because they are
subject to wear.
Troubleshooting
This chapter summarises the most common
problems you could encounter with the
appliance. If you are unable to solve the
problem with the information below,
contact the Consumer Care Centre in your
country.
Problem Possible
cause
Solution
The shaver
does not
shave as
well as it
used to.
The shaving
heads are
dir ty. You
have not
cleaned the
shaver well
enough or
you have
not cleaned
it for a long
time.
Clean the
shaver thor-
oughly before
you continue
shaving. See
chapter
‘Cleaning and
maintenance’.
Long hairs
obstruct
the shaving
heads.
Clean the
cutters and
guards with
the clean-
ing brush
supplied.
See chapter
‘Cleaning and
maintenance’,
section ‘Every
two months:
shaving heads’.
The
shaving
heads are
damaged
or worn.
Replace the
shaving heads.
See chapter
‘Replacement’.
The shaver
does not
work
when I
push the
on/off
slide up-
wards.
The bat-
teries are
placed
incorrectly.
Make sure
the + and -
indications on
the batteries
match the
indications in
the battery
compartment.
Problem Possible
cause
Solution
The bat-
teries are
empty.
Replace the
batteries.
See chapter
‘Preparing for
use’.
My skin is
irritated
after shav-
ing.
Your skin
needs time
to get
used to
the Philips
shaving
system.
Skin irritation
during the
rst 2-3
weeks of use
is possible.
After this
period, the
skin irritation
usually disap-
pears.
The rota-
tion speed
of the
shaving
heads is
slower
than usual.
Too much
dirt has
collected
in the
shaving
heads.
Clean the
shaving heads.
See chapter
‘Cleaning and
maintenance’.
The bat-
teries are
empty
Replace the
batteries.
See chapter
‘Preparing for
use’.
The ap-
pliance
makes a
strange
noise.
Too much
dirt has
collected
in the
shaving
heads.
Clean the
shaving heads.
After cleaning,
lubricate
the central
point on the
inside of the
guards with
Philips Clean-
ing Spray
(HQ110).
See chapter
‘Cleaning and
maintenance’.
The
shaving
heads are
damaged
or worn.
Replace the
shaving heads.
See chapter
‘Replacement’.
简体中文
简介
感谢您的惠顾，欢迎光临飞利浦！
为了您能充分享受飞利浦提供的支持，
请在 www.philips.com/welcome 上注
册您的产品。
基本说明 (图 1)
1 保护盖
2 剃须刀头
3 剃毛刀头部件
4 固定架
5 固定架的中央弹簧
6 释放钮
7 毛发储藏室
8 开/关滑钮
9 电池舱盖
10 飞利浦清洁喷雾剂 (HQ 110)
（可选）
11 刀片
12 网罩
13 清洁刷
注意事项
使用产品之前，请仔细阅读本用户手
册，并妥善保管以供日后参考。
警告
-保持器具干燥。
-禁止水洗。警告符号注释：禁止用在
打开的水龙头下进行清洗。（图2）
-肢体不健全、精神有障碍及缺乏相
关经验和知识的人（包括儿童）必
须在监护人的监督及指导下使用。
-请照看好儿童，本产品不能用于
玩耍。
注意
-必须在 5°C 至 35°C 之间的温度
下使用和存放本产品。
-如果超过一个月不使用本产品，
请从产品中取出电池。
-请使用飞利浦电池，以实现最佳的
剃须效果。
-仅限使用随附的清洁刷。
-确保清洁刷保持洁净。
电磁场 (EMF)
这款飞利浦产品符合关于电磁场 (EMF)
的相关标准。据目前的科学证明，如果
正确使用并按照本用户手册中的说明进
行操作，本产品是安全的。
6 用清洁刷的短毛一侧清洁刀片。
按箭头方向小心地清洁。(图17)
7 用清洁刷的长毛一侧清洁网罩。
(图18)
8 清洁后，将刀片重新装回至网罩。
(图19)
9 滑动剃须刀头，将其重新安装到固
定架上。(图20)
10 将固定架重新安装到剃须刀头部件
上（可听到“咔嗒”一声）。
(图21)
11 将剃须刀头组件重新安装到剃须刀
上。(图13)
存储
保持器具干燥。
必须在 5°C 至 35°C 之间的温度下使
用和存放本产品。
1 关闭剃须刀。
2 使用后请盖上剃须刀保护盖，以防
止损坏剃须刀头并避免其内积聚灰
尘。(图22)
更换
每两年更换一次刀头以获得最佳的剃
须效果。
只能使用飞利浦剃须刀头（适用于中
国的 HQ4+ 或适用于世界其他各地的
HQ56）更换损坏或磨损的剃须刀头。
有关如何拆卸剃须刀头的说明，请参
阅“清洁和保养”一章中的“每两个
月：清洁剃须刀头”部分。
附件
为了保持剃须刀的最佳性能，请确保定
期清洁并在推荐的时间更换剃须刀头。
剃须刀头
-建议您每两年更换一次剃须刀头。
务必仅使用飞利浦剃须刀头（适用
于中国的 HQ4 或适用于世界其他
各地的 HQ56）进行更换。 (图 23)
清洁
-使用飞利浦清洁喷雾剂 (HQ110)
彻底清洁剃须刀头。
环保
-弃置产品时，请不要将其与一般生
活垃圾堆放在一起；应将其交给官
方指定的回收中心。这样做有利于
环保。 (图 24)
使用准备
插入电池
本产品使用两节 R6 AA 1.5 伏碱性电
池。最好插入全新的飞利浦碱性电池，
以实现最佳的剃须效果。
装入电池之前，双手要保持干燥。
1 取下电池仓盖(图3)
2 将两节电池放入电池仓。(图4)
注意：确保电池的正负极指示与电池仓
内的正负指示一致。
注意：如果电池装错方向，则剃须刀就
不会工作。
3 将电池仓盖装回到产品。首先放入
仓盖的顶部(1)，然后按下底部(2)
，直到听到“咔哒”一声。(图5)
如何避免因电池泄漏而引起的损坏
-切勿将产品暴露在温度高于 35°C
的环境中。
-如果一个月或一个月以上不使用本
产品，则将电池取出。
-切勿将耗尽的电池留在产品中。
剃须时间
两节全新飞利浦碱性电池可供 60 分钟
剃须。
使用本产品
1 取下保护盖。
2 按开/关滑钮将其解锁，然后向上推
打开剃须刀电源。(图6)
开/关滑钮具有集成式开关锁，可防止意
外打开剃须刀电源。
3 将剃须刀头在皮肤上移动。作直线
和迂回动作。(图7)
注意：仅限在干爽的面部剃须。请勿
将本剃须刀与凝胶、剃须泡沫或水结
合使用。
注意：您的皮肤可能需要2到3周才
能适应飞利浦剃须系统。
4 向下推动开/关滑钮以关闭剃须刀电
源。
5 每次剃须后均应清洁剃须刀（请参
阅“清洁和保养”一章）。
6 使用后请盖上剃须刀保护盖，
以防止损坏剃须刀头并避免其内积
聚灰尘。(图8)
清洁和保养
不要使用钢丝球、研磨性清洁剂或腐
蚀性液体（例如汽油或丙酮）来清洁
产品。
每次剃须后均应清洁剃须刀，以保证更
好的剃须效果。
为了获得最佳的清洁效果，建议您使用
飞利浦清洁喷雾剂 (HQ110)。有关详
情，请咨询飞利浦经销商。
注意：并非所有国家/地区都销售飞利
浦剃须刀头清洁喷雾剂(HQ110)。请向
当地的客户服务中心了解是否有售。
每次剃须后：清洗剃须刀头部件和
胡茬储藏室
1 关闭剃须刀。
2 用随附的清洁刷清洁产品顶部。
(图9)
3 按释放按钮(1)，垂直向上拉动剃须
刀头部件，将其从剃须刀(2)中拉
出。(图10)
4 用清洁刷清洁剃须刀头部件的内
侧。(图11)
5 用清洁刷清洁胡茬储藏室。(图12)
6 将剃须刀头组件重新安装到剃须刀
上。(图13)
每两个月：清洁剃须刀头
注意：请勿使用清洁剂或酒精来清洁
剃须刀头。只能使用飞利浦清洁喷雾剂
(HQ110)。
1 关闭剃须刀。
2 按释放按钮(1)，垂直向上拉动剃须
刀头部件，将其从剃须刀(2)中拉
出。(图10)
3 要取下固定架，请捏拢中央弹簧的
两侧(1)。然后向上提起固定架，
将其从剃须刀头部件中取出(2)。
(图14)
4 将剃须刀头滑离固定架。一次取下
并清洁一个剃须刀头。每个剃须刀
头包含一组刀片和网罩。(图15)
注意：不要同时清洁多组刀片和网罩，
因为它们都是相互匹配的。如果不小心
将刀片和网罩弄混，则需要数周时间才
能恢复产品的最佳剃须性能。
5 从刀片上卸下网罩。(图16)
问题 可能的
原因
解决方法
电池已耗
尽。
更换电池。
见“使用准
备”一章。
我在剃
须后出
现皮肤
过敏。
您的皮肤
需要一定
的时间来
适应飞利
浦剃须
刀。
在前 2-3 周的
使用过程中，
可能会出现皮
肤过敏。在此
之后，皮肤过
敏通常会消
失。
剃须刀
头的转
速比平
时慢。
剃须刀头
中积聚了
太多的灰
尘。
清洁剃须刀
头。请参阅
“清洁和保
养”一章。
电池已
耗尽
更换电池。
见“使用准
备”一章。
产品发
出奇怪
的噪
音。
剃须刀头
中积聚了
太多的灰
尘。
清洁剃须刀
头。清洁后，
用飞利浦清
洁喷雾剂
(HQ110) 润
滑网罩内侧的
中央点。请参
阅“清洁和保
养”一章。
剃须刀头
已损坏或
磨损。
更换剃须刀
头。见“更
换”一章。
-电池包含可能污染环境的物质。
不要将电池和普通生活垃圾一同丢
弃，而应交给正式的电池收集点处
理。丢弃产品时，一定要将电池取
出，并将产品送到官方指定的回收
站。 (图 25)
保修与服务
如果您需要服务或信息，或有任何疑
问，请访问飞利浦网站：
www.philips.com。您也可与所在国家/
地区的飞利浦客户服务中心联系（可从
全球保修卡中找到其电话号码）。如果
您所在的国家/地区没有飞利浦客户服务
中心，请与当地的飞利浦经销商联系。
保修条款
由于剃须刀头（刀片和网罩）属于易磨
损物品，因此不在国际保修条款的涵盖
范围之列。
故障种类和处理方法
本章归纳了使用本产品时最可能遇到的
问题。如果您无法根据下面的信息解决
问题，请联系您所在国家/地区的飞利浦
客户服务中心。
问题 可能的
原因
解决方法
剃须刀
的剃须
效果没
有以前
好。
剃须刀头
变脏。您
没有将剃
须刀清洁
干净，或
长时间未
清洁过剃
须刀。
在继续剃须之
前，请先彻底
清洗剃须刀。
见“清洁和保
养”一章。
过长的胡
须堵塞了
剃须刀
头。
用随附的清洁
刷清洁刀片和
网罩。见“清
洁和保养”
中“每两个
月：剃须刀
头”部分。
剃须刀头
已损坏或
磨损。
更换剃须刀
头。见“更
换”一章。
向上推
动开/
关滑钮
时剃须
刀不工
作。
电池放置
不正确。
确保电池的正
负极指示与电
池仓内的指示
一致。
11/09/2013