Philips PQ212/16 User Manual
Displayed below is the user manual for PQ212/16 by Philips which is a product in the Men's Shavers category. This manual has pages.
Related Manuals
ENGLISH
Introduction
Congratulations on your purchase and welcome to
Philips! To fully benefit from the support that Philips offers,
register your product at www.philips.com/welcome.
General description (Fig. 1)
1 Protection cap
2 Shaving heads
3 Shaving unit
4 Hair chamber
5 On/off slide
6 Front panel
7 Charging light
8 Foldable plug
9 Release button of foldable plug
10 Retaining frame
11 Central spring of retaining frame
12 Cutter
13 Guard
14 Philips Cleaning Spray (HQ110)
(Optional)
15 Cleaning brush
Important
Read this user manual carefully before you use the
appliance and save it for future reference.
Danger
- Keep the appliance dry.
- This symbol means: Forbidden to clean under a
running tap (Fig. 2).
Warning
- This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
- Children should be supervised to ensure that they
do not play with the appliance.
Caution
- Use and store the appliance at a temperature
between 5°C and 35°C.
- Only use the cleaning brush supplied.
- Make sure the cleaning brush remains clean.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards
regarding electromagnetic fields. If handled properly
and according to the instructions in this user manual,
the appliance is safe to use based on scientific evidence
available today.
PQ218, PQ212
Register your product and get support at
www.philips.com/welcome
4222.002.5271.2
4
7
10
13
16
19
22
25
2
5
8
11
14
17
20
23
3
6
9
12
15
18
21
24
26 27
1
Charging
Charge the appliance when the motor stops or starts
running slower.
When you charge the shaver for the first time or after
a long period of disuse, let it charge continuously for 12
hours. Charging normally takes approx. 8 hours.
Do not leave the appliance connected to the mains for
more than 24 hours.
1 Switch off the shaver before you start charging it.
2 Press the release (1) button and fold out the
foldable plug (2) (‘click’) (Fig. 3).
3 Insert the foldable plug unit into the wall
socket (Fig. 4).
,The charging light goes on to indicate that the
appliance is charging (Fig. 5).
4 Remove the shaver from the wall socket when the
battery is fully charged.
5 Press the release button (1) and fold the foldable
plug back into the appliance (2) (‘click’) (Fig. 6).
Cordless shaving time
A fully charged shaver has a cordless shaving time of
approximately 30 minutes.
Using the appliance
The shaver cannot be used directly from the mains.
1 Remove the protection cap.
2 Push the on/off slide upwards to switch on the
shaver (Fig. 7).
3 Move the shaving heads over your skin. Make both
straight and circular movements (Fig. 8).
Note: Shave on a dry face only. Do not use the shaver in
combination with gel, foam or water.
Note: Your skin may need 2 or 3 weeks to get accustomed
to the Philips shaving system.
4 Push the on/off slide downwards to switch off the
shaver.
5 Clean the shaver after every shave, see chapter
‘Cleaning and maintenance’.
6 Put the protection cap on the shaver after use to
prevent damage and to avoid dirt accumulation in
the shaving heads (Fig. 9).
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the
appliance.
Clean the shaver after every shave to guarantee better
shaving performance. For the best cleaning result, we
advise you to use Philips Cleaning Spray (HQ110). Ask
your Philips dealer for information.
Note: Philips Shaving Head Cleaning Spray (HQ110) may
not be available in all countries. Contact the Customer
Care Centre in your country about the availability of this
accessory.
After every shave: shaving unit and hair
chamber
1 Switch off the shaver.
2 Clean the top of the appliance with the cleaning
brush supplied (Fig. 10).
3 Pull the shaving unit straight up off the
shaver (Fig. 11).
4 Clean the inside of the shaving unit with the
cleaning brush (Fig. 12).
5 Clean the hair chamber with the cleaning
brush (Fig. 13).
6 Put the shaving unit back onto the shaver (Fig. 14).
Every two months: shaving heads
Note: Do not use cleaning agents or alcohol to clean the
shaving heads. Only use Philips Cleaning Spray (HQ110).
1 Switch off the shaver.
2 Pull the shaving unit straight up off the
shaver (Fig. 11).
3 To remove the retaining frame, push the sides of
the central spring towards each other (1).Then
lift the retaining frame out of the shaving unit
(2) (Fig. 15).
4 Slide the shaving heads out of the retaining frame.
Remove and clean one shaving head at a time.
Each shaving head consists of a cutter and a
guard (Fig. 16).
Note: Do not clean more than one cutter and guard at a
time, since they are matching sets. If you accidentally mix
up the cutters and guards, it may take several weeks before
optimal shaving performance is restored.
5 Remove the guard from the cutter (Fig. 17).
6 Clean the cutter with the short-bristled side of the
cleaning brush. Brush carefully in the direction of
the arrows (Fig. 18).
7 Clean the guard with the long-bristled side of the
cleaning brush (Fig. 19).
8 Put the cutter back into the guard after
cleaning (Fig. 20).
9 Slide the shaving heads back into the retaining
frame (Fig. 21).
10 Put the retaining frame back into the shaving unit
(‘click’) (Fig. 22).
11 Put the shaving unit back onto the shaver (Fig. 14).
Storage
Keep the appliance dry.
Use and store the appliance at a temperature between
5°C and 35°C.
1 Switch off the shaver.
2 Put the protection cap on the shaver after use to
prevent damage and to avoid dirt accumulation in
the shaving heads (Fig. 9).
Replacement
Replace the shaving heads every two years for optimal
shaving results.
Replace damaged or worn shaving heads with Philips
shaving heads only (HQ4+ for China or HQ56 for the
rest of the world).
For instructions on how to remove the shaving heads, see
chapter ‘Cleaning and maintenance’, section ‘Every two
months: shaving heads’.
Accessories
To retain top performance of your shaver, make sure
you clean it regularly and replace its shaving heads at the
recommended time.
Shaving heads
- We advise you to replace your shaving heads every
two years. Always replace them with Philips shaving
heads only (HQ4+ for China or HQ56 for the rest
of the world) (Fig. 23).
Cleaning
- Use Philips Cleaning Spray (HQ110) to clean the
shaving heads thoroughly.
Environment
- Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
this, you help to preserve the environment (Fig. 24).
- The built-in rechargeable battery contains substances
that may pollute the environment. Always remove
the battery before you discard and hand in the
appliance at an official collection point. Dispose of
the battery at an official collection point for batteries.
If you have trouble removing the battery, you can
also take the appliance to a Philips service centre.
The staff of this centre will remove the battery for
you and will dispose of it in an environmentally safe
way (Fig. 25).
Removing the rechargeable
battery
Only remove the rechargeable battery when it is
completely empty.
1 Make sure the appliance is disconnected from the
mains.
2 Let the shaver run until it stops, undo the screw on
the back of the shaver (1) and lift the back panel off
the shaver (2) (Fig. 26).
3 Remove the rechargeable battery (Fig. 27).
Do not connect the shaver to the mains again after you
have removed the battery.
Guarantee and service
If you need service or information or if you have a
problem, please visit the Philips website at www.philips.
com or contact the Philips Consumer Care Centre in
your country. You find its phone number in the worldwide
guarantee leaflet. If there is no Consumer Care Centre in
your country, go to your local Philips dealer.
Guarantee restrictions
The shaving heads (cutters and guards) are not covered
by the terms of the international guarantee because they
are subject to wear.
Troubleshooting
This chapter summarises the most common problems
you could encounter with the appliance. If you are unable
to solve the problem with the information below, contact
the Consumer Care Centre in your country.
Problem Possible
cause
Solution
The shaver
does not shave
as well as it
used to.
The shaving
heads are dirty.
You have not
cleaned the
shaver well
enough or
you have not
cleaned it for a
long time.
Clean the
shaver
thoroughly
before you
continue
shaving. See
chapter
‘Cleaning and
maintenance’.
3 垂直向上拉动剃须刀头部件，将其从剃须刀中
拉出。(图11)
4 用清洁刷清洁剃须刀头部件的内侧。(图12)
5 用清洁刷清洁胡茬储藏室。(图13)
6 将剃须刀头组件重新安装到剃须刀上。(图14)
每两个月：清洁剃须刀头
注意：请勿使用清洁剂或酒精来清洁剃须刀头。只
能使用飞利浦清洁喷雾剂(HQ110)。
1 关闭剃须刀。
2 垂直向上拉动剃须刀头部件，将其从剃须刀中
拉出。(图11)
3 要取下固定架，请捏拢中央弹簧的两侧(1)。然
后向上提起固定架，
将其从剃须刀头部件中取出(2)。
(图15)
4 将剃须刀头滑离固定架。一次取下并清洁一个
剃须刀头。每个剃须刀头包含一组刀片和网
罩。(图16)
注意：不要同时清洁多组刀片和网罩，因为它们都
是相互匹配的。如果不小心将刀片和网罩弄混，则
需要数周时间才能恢复产品的最佳剃须性能。
5 从刀片上卸下网罩。(图17)
6 用清洁刷的短毛一侧清洁刀片。按箭头方向小
心地清洁。(图18)
7 用清洁刷的长毛一侧清洁网罩。
(图19)
8 清洁后，将刀片重新装回至网罩。
(图20)
9 滑动剃须刀头，将其重新安装到固定架上。(
图21)
10将固定架重新安装到剃须刀头部件上（可听
到“咔嗒”一声）。
(图22)
11将剃须刀头组件重新安装到剃须刀上。(图14)
存储
保持器具干燥。
必须在 5°C 至 35°C 之间的温度下使用和存放本
产品。
1 关闭剃须刀。
2 使用后请盖上剃须刀保护盖，以防止损坏剃须
刀头并避免其内积聚灰尘。(图9)
Problem Possible
cause
Solution
Long hairs
obstruct the
shaving heads.
Clean the
cutters and
guards with
the cleaning
brush supplied.
See chapter
‘Cleaning and
maintenance’,
section ‘Every
two months:
shaving heads’.
The shaving
heads are
damaged or
worn.
Replace the
shaving heads.
See chapter
‘Replacement’.
The shaver
does not work
when I push
the on/off
slide upwards.
The battery is
empty.
Recharge
the battery.
See chapter
‘Charging’.
My skin is
irritated after
shaving.
Your skin needs
time to get used
to the Philips
shaving system.
Skin irritation
during the first
2-3 weeks of
use is possible.
After this
period, the skin
irritation usually
disappears.
The rotation
speed of the
shaving heads is
slower
than usual.
Too much dirt
has collected
in the shaving
heads.
Clean the
shaving heads.
See chapter
‘Cleaning and
maintenance’.
The
battery
is empty
Recharge
the battery.
See chapter
‘Charging’.
The appliance
makes a strange
noise.
Too much dirt
has collected
in the shaving
heads.
Clean the
shaving heads.
After cleaning,
lubricate the
central point
on the inside of
the guards with
Philips Cleaning
Spray (HQ110).
See chapter
‘Cleaning and
maintenance’.
The shaving
heads are
damaged or
worn.
Replace the
shaving heads.
See chapter
‘Replacement’.
简体中文
简介
感谢您的惠顾，欢迎光临飞利浦！为了您能充分
享受飞利浦提供的支持，请在 www.philips.com/
welcome 上注册您的产品。
一般说明 (图 1)
1 保护盖
2 剃须刀头
3 剃毛刀头部件
4 毛发储藏室
5 开/关滑钮
6 前面板
7 充电指示灯
8 折叠式插头
9 折叠式插头的释放钮
10 固定架
11 固定架的中央弹簧
12 刀片
13 网罩
14 飞利浦清洁喷雾剂 (HQ 110)
（可选）
15 清洁刷
注意事项
使用产品之前，请仔细阅读本用户手册，并妥善保
管以供日后参考。
危险
-保持器具干燥。
-警告符号注释：禁止用在打开的水龙头下进行
清洗。 (图 2)
警告
-本产品不打算由肢体不健全、感觉或精神上有
障碍或缺乏相关经验和知识的人（包括儿童）
使用，除非有负责他们安全的人对他们使用本
产品进行监督或指导。
-应照看好儿童，确保他们不玩耍本产品。
注意
-必须在 5°C 至 35°C 之间的温度下使用和存
放本产品。
-仅限使用随附的清洁刷。
-确保清洁刷保持洁净。
电磁场 (EMF)
本飞利浦产品符合电磁场所有相关标准。就目前的
科学研究证明，如果正确使用并按照本用户手册中
的说明进行操作，本产品是安全的。
充电
当马达停转或转速开始下降时，为产品充电。
如果是第一次充电，或长时间未使用之后的第一次
充电，应将其连续充 12 小时。充电通常需约 8 小
时。
不要将本产品与电源接通超过24小时。
1 开始充电前，请关闭剃须刀。
2 按下释放钮(1)，并展开折叠式插头(2)（可听
到“咔哒”一声）。
(图3)
3 将折叠式插头插入电源插座。
(图4)
,充电指示灯亮起，表示剃须刀正在充电。(图5)
4 请在电池完全充电后，从插座上取下剃须刀。
5 按下释放按钮(1)并将折叠式插头重新折叠到产
品内部(2)（可听到“咔哒”一声）。(图6)
不接电源的剃须时间
完全充电的剃须刀在不连接电源的情况下最长可使
用达 30 分钟。
使用本产品
剃须刀不能连在电源上直接使用。
1 取下保护盖。
2 向上推动开/关滑钮以接通剃须刀电源。(图7)
3 将剃须刀头在皮肤上移动。作直线和迂回动
作。(图8)
注意：仅限在干爽的面部剃须。请勿将本剃须刀与
凝胶、剃须泡沫或水结合使用。
注意：您的皮肤可能需要2到3周才能适应飞利浦
剃须系统。
4 向下推动开/关滑钮以关闭剃须刀电源。
5 每次剃须后均应清洁剃须刀（请参阅“清洁和
保养”一章）。
6 使用后请盖上剃须刀保护盖，以防止损坏剃须
刀头并避免其内积聚灰尘。(图9)
清洁和保养
不要使用钢丝绒、研磨性清洁剂或腐蚀性液体（例
如汽油或丙酮）来清洁产品。
每次剃须后均应清洁剃须刀，以保证更好的剃须效
果。为了获得最佳的清洁效果，建议您使用飞利浦
清洁喷雾剂 (HQ110)。有关详情，请咨询飞利浦经
销商。
注意：并非所有国家/地区都销售飞利浦剃须刀头清
洁喷雾剂(HQ110)。请向当地的客户服务中心了解
是否有售。
每次剃须后：清洗剃须刀头部件和胡茬储藏室
1 关闭剃须刀。
2 用随附的清洁刷清洁产品顶部。
(图10)
故障种类和处理方法
本章归纳了使用本产品时最可能遇到的问题。如果
您无法根据下面的信息解决问题，请联系您所在国
家/地区的飞利浦客户服务中心。
问题 可能的原因 解决方法
剃须刀的剃须
效果没有以前
好。
剃须刀头变脏。
您没有将剃须刀
清洁干净，或长
时间未清洁过剃
须刀。
在继续剃须之
前，请先彻底
清洗剃须刀。
见“清洁和保
养”一章。
过长的胡须堵塞
了剃须刀头。
用随附的清洁
刷清洁刀片
和网罩。见“
清洁和保养”
中“每两个
月：剃须刀
头”部分。
剃须刀头已损坏
或磨损。
更换剃须刀
头。见“更
换”一章。
向上推动开/
关滑钮时剃须
刀不工作。
电池已耗尽。 给电池充电。
见“充电”一
章。
我在剃须后
出现皮肤过
敏。
您的皮肤需要一
定的时间来适应
飞利浦剃须刀。
在前 2-3 周的
使用过程中，
可能会出现
皮肤过敏。在
此之后，皮肤
过敏通常会消
失。
剃须刀头的
转速比平时
慢。
剃须刀头中积聚
了太多的灰尘。
清洁剃须刀
头。请参阅“
清洁和保养”
一章。
电池已耗尽 给电池充电。
见“充电”一
章。
产品发出奇怪
的噪音。
剃须刀头中积
聚了太多的灰
尘。
清洁剃须刀
头。清洁后，
用飞利浦清
洁喷雾剂
(HQ110) 润
滑网罩内侧的
中央点。请参
阅“清洁和保
养”一章。
剃须刀头已损
坏或磨损。
更换剃须刀
头。见“更
换”一章。
更换
每两年更换一次刀头以获得最佳的剃须效果。
只能使用飞利浦剃须刀头（适用于中国的 HQ4+ 或
适用于世界其他各地的 HQ56）更换损坏或磨损的
剃须刀头。
有关如何拆卸剃须刀头的说明，请参阅“清洁和保
养”一章中的“每两个月：清洁剃须刀头”部分。
附件
为了保持剃须刀的最佳性能，请确保定期清洁并在
推荐的时间更换剃须刀头。
剃须刀头
-建议您每两年更换一次剃须刀头。务必仅使用
飞利浦剃须刀头（适用于中国的 HQ4+ 或适用
于世界其他各地的 HQ56）进行更换。 (图 23)
清洁
-使用飞利浦清洁喷雾剂 (HQ110) 彻底清洁剃须
刀头。
环保
-弃置产品时，请不要将其与一般生活垃圾堆放
在一起；应将其交给官方指定的回收点。这样
做有利于环保。 (图 24)
-内置充电电池含有可能会污染环境的物质。丢
弃产品时，一定要将电池取出，并将产品送到
官方指定的回收站。到官方指定的电池回收站
处理电池。如果您在取出电池时遇到问题，您
也可以将产品送至飞利浦维修中心。维修中心
的员工会帮您取出电池，并以环保的方式处理
它。 (图 25)
卸下充电电池
仅在电池电量完全耗尽后方可取出充电电池。
1 确保已断开产品的电源连接。
2 让剃须刀一直运行直到停止，拧开剃须刀背面
的螺丝钉(1)并将后面板从剃须刀上卸除(2)。(
图26)
3 卸下充电电池。(图27)
取出电池之后，不要再将剃须刀与电源连接在一
起。
保修与服务
如果您需要服务或信息，或有任何疑问，请访问飞利
浦网站：www.philips.com。您也
可与所在国家/地区
的飞利浦客户服务中心联系（可从全球保修卡中找
到其电话号码）。如果您所在的国家/地区没有飞利
浦客户服务中心，请与当地的飞利浦经销商联系。
保修条款
由于剃须刀头（刀片和网罩）属于易磨损物品，因
此不在国际保修条款的涵盖范围之列。
06/01/2012