Philips HQ130/16 User Manual
Displayed below is the user manual for HQ130/16 by Philips which is a product in the Men's Shavers category. This manual has pages.
Related Manuals
2 Place two batteries in the battery
compartment (Fig. 3).
Note: Make sure the + and - indications on
the batteries match the indications in the
battery compartment.
Note: The shaver does not work if the
batteries have been placed incorrectly.
3 Put the lid of the battery
compartment back onto the appliance.
First insert the top part of the lid
(1) and then press down the bottom
part (2) until you hear a click (Fig. 4).
How to avoid damage due to
battery leakage
- Do not expose the appliance to
temperatures higher than 35°C.
- Remove the batteries if you are not
going to use the appliance for a month
or more.
- Do not leave empty batteries in the
appliance.
Shaving time
Two new batteries offer a shaving time of
60 minutes.
Using the appliance
Shaving
Your skin may need 2 or 3 weeks to get
accustomed to the Philips shaving system.
Shaving on a dry face gives the best results.
1 Push the on/off slide upwards to
switch on the shaver (Fig. 5).
2 Move the shaving heads over your
skin. Make both straight and circular
movements (Fig. 6).
3 Push the on/off slide downwards to
switch off the shaver.
4 Push the protection cap onto the
shaver after use to prevent damage to
the shaving heads (‘click’) (Fig. 7).
Cleaning and maintenance
Never use scouring pads, abrasive cleaning
agents or aggressive liquids such as petrol
or acetone to clean the appliance.
Regular cleaning guarantees better shaving
performance.
For easy and optimal cleaning, Philips
Shaving Head Cleaning Spray (type no.
HQ110) is available. Ask your Philips dealer
for information.
Note: Philips Shaving Head Cleaning
Spray may not be available in all countries.
Contact the Consumer Care Centre in your
country about the availability in your country.
You can also clean the shaver in the
following way:
Every week: shaving unit and hair
chamber
1 Switch off the shaver.
2 Clean the top of the appliance with
the cleaning brush (Fig. 8).
3 Press the release button (1) and
remove the shaving unit (2) (Fig. 9).
4 Clean the inside of the hair
chamber with the cleaning
brush (Fig. 10).
5 Clean the inside of the shaving unit
with the cleaning brush (Fig. 11).
6
Put the shaving unit back onto the shaver.
Every two months: shaving heads
1 Switch off the shaver.
2 Press the release button (1) and
remove the shaving unit (2) (Fig. 9).
3 To remove the retaining frame, push the
sides of the central spring towards each
other (1). Then lift the retaining frame
out of the shaving unit (2) (Fig. 12).
4 Slide the shaving heads out of the
retaining frame (Fig. 13).
Do not mix up the cutters and the guards.
Cutters and guards are matching sets.
Each cutter has been ground with
its corresponding guard for optimal
performance. If you accidentally mix up the
sets, it may take several weeks before
optimal shaving performance is restored.
5 Clean the cutter with the short-
bristled side of the cleaning
brush (Fig. 14).
Brush carefully in the direction of the arrow.
6 Clean the guard with the cleaning
brush (Fig. 15).
HQ139, HQ136, HQ132, HQ130
Register your product and get support at
www.philips.com/welcome
4222.002.5009.6
1 2 3
45 6
78 9
10 11 12
13 14 15
16
2
yrs
17 18
19
ENGLISH
Introduction
Congratulations on your purchase and
welcome to Philips! To fully benet from
the support that Philips offers, register your
product at www.philips.com/welcome.
Important
Read this user manual carefully before you
use the appliance and save it for future
reference.
Danger
- Keep the appliance dry.
Warning
- This symbol means: Forbidden to clean
under a running tap (Fig. 1).
- This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
- Children should be supervised to ensure
that they do not play with the appliance.
Caution
- Use and store the appliance at a
temperature between 15°C and 35°C.
- Remove the batteries from the
appliance if you are not going to use it
for a month or more.
Electromagnetic elds (EMF)
This shaver complies with all standards
regarding electromagnetic elds (EMF).
If handled properly and according to the
instructions in this user manual, the shaver
is safe to use based on scientic evidence
available today.
Preparing for use
Inserting batteries
This shaver runs on two R6 AA 1.5-volt
batteries. Preferably use Philips alkaline
batteries.
Make sure that your hands are dry when
you insert the batteries.
1 Remove the lid of the battery
compartment (Fig. 2)
7 Slide the shaving heads back into the
retaining frame and put the retaining
frame back into the shaving unit (Fig. 16).
8
Put the shaving unit back onto the shaver.
Extra thorough cleaning
For extra thorough cleaning, put the shaving
heads in a degreasing liquid (e.g. alcohol)
every six months. To remove the shaving
heads, follow steps 1 to 4 described above.
After cleaning, lubricate the central point on
the inside of the guards with a drop of sewing
machine oil to prevent wear of the shaving
heads.
Replacement
Replace the shaving heads every 2 years or
if they are damaged or worn. Replace them
with HQ4 Philips shaving heads only.
1 Switch off the shaver.
2 Press the release button (1) and
remove the shaving unit (2) (Fig. 9).
3 To remove the retaining frame, push the
sides of the central spring towards each
other (1). Then lift the retaining frame
out of the shaving unit (2) (Fig. 12).
4 Slide the shaving heads out of the
retaining frame and replace them with
new ones (Fig. 13).
5 Put the retaining frame back into the
shaving unit.
6
Put the shaving unit back onto the shaver.
Ordering accessories
To purchase accessories for this
appliance, please visit our online shop at
www.shop.philips.com/service. If the
online shop is not available in your country,
go to your Philips dealer or a Philips service
centre. If you have any difculties obtaining
accessories for your appliance, please
contact the Philips Consumer Care Centre
in your country. You nd its contact details
in the worldwide guarantee leaet.
To retain the top performance of your shaver,
make sure you clean it regularly and replace
its shaving heads at the recommended time.
Shaving heads
- We advise you to replace your shaving
heads every two years. Always replace
with the appropriate shaving heads for
your type of shaver (Fig. 17).
Cleaning
- Use Cleaning Spray HQ110 to clean
the shaving heads thoroughly.
Accessories available for this
shaver:
- HQ4 Philips shaving heads.
- HQ110 Philips Shaving Head Cleaning
Spray.
Environment
- Batteries contain substances that
may pollute the environment. Do not
throw away empty batteries with the
normal household waste, but dispose
of them at an ofcial collection point
for batteries. Always remove the
batteries before you discard and hand
in the appliance at an ofcial collection
point (Fig. 18).
- Do not throw away the appliance with
the normal household waste at the end of
its life, but hand it in at an ofcial collection
point for recycling. By doing this, you help
to preserve the environment (Fig. 19).
Guarantee and service
If you need service or information or if
you have a problem, please visit the Philips
website at www.philips.com/support or
contact the Philips Consumer Care Centre
in your country. You nd its phone number
in the worldwide guarantee leaet. If there
is no Consumer Care Centre in your
country, go to your local Philips dealer.
Guarantee restrictions
The shaving heads (cutters and guards) are
not covered by the terms of the international
guarantee because they are subject to wear.
Troubleshooting
This chapter summarises the most common
problems you could encounter with the
appliance. If you are unable to solve the
problem with the information below, visit
www.philips.com/support for a list of
frequently asked questions or contact the
Consumer Care Centre in your country.
Problem Possible
cause
Solution
Reduced
shaving
perfor-
mance.
The shav-
ing heads
are dirty.
Clean the
shaver
thoroughly.
See chapter
‘Cleaning and
maintenance’.
Long hairs
obstruct
the shaving
heads.
Clean the
cutters and
guards with
the clean-
ing brush
supplied.
See chapter
‘Cleaning and
maintenance’.
The
shaving
heads are
damaged
or worn.
Replace the
shaving heads.
See chapter
‘Replacement’.
The shaver
does not
work
when I
push the
on/off
slide up-
wards.
The bat-
teries are
empty.
Replace the
batteries.
See chapter
‘Preparing for
use’.
The
batteries
have been
placed
incorrectly.
Make sure
the + and -
indications on
the batteries
match the
indications in
the battery
compartment
(see chapter
‘Preparing for
use’).
Skin irrita-
tion.
Your skin
needs time
to get
used to
the Philips
shaving
system.
Skin irritation
during the
rst 2-3
weeks of use
is normal. Af-
ter this period,
the skin ir-
ritation usually
disappears.
简体中文
简介
感谢您的惠顾，欢迎光临飞利浦！为了
您能充分享受飞利浦提供的支持，请
在 www.philips.com/welcome 上注册您
的产品。
注意事项
使用产品之前，请仔细阅读本用户手
册，并妥善保管以供日后参考。
危险
-保持器具干燥。
警告
-此符号表示：禁止用在打开的水龙
头下进行清洗。 (图 1)
-本产品不打算由肢体不健全、感觉
或精神上有障碍或缺乏相关经验和
知识的人（包括儿童）使用，除非
有负责他们安全的人对他们使用本
产品进行监督或指导。
-应照看好儿童，确保他们不玩耍本
产品。
注意
-必须在 15 摄氏度至 35 摄氏度之间
的温度下使用和存放本产品。
-如果超过一个月不使用本产品，请
从产品中取出电池。
电磁场 (EMF)
这款剃须刀符合关于电磁场 (EMF) 的所
有相关标准。据目前的科学证明，如果
正确使用并按照本用户手册中的说明进
行操作，本剃须刀是安全的。
使用准备
插入电池
本剃须刀使用两节 R6 AA 1.5 伏电池。
最好使用飞利浦碱性电池。
装入电池之前，双手要保持干燥。
1 取下电池仓盖(图2)
2 将两节电池放入电池仓。(图3)
注意：确保电池的正负极指示与电池仓
内的正负指示一致。
注意：如果电池装错方向，则剃须刀就
不会工作。
3 将电池仓盖装回到产品。首先插入
仓盖的顶部(1)，然后按下底部(2)
，直到听到“咔哒”一声。(图4)
如何避免因电池泄漏而引起的损坏
-切勿将产品暴露在温度高于 35°C
的环境中。
-如果一个月或一个月以上不使用本
产品，则将电池取出。
-切勿将耗尽的电池留在产品中。
剃须时间
两节新电池可供 60 分钟剃须。
使用本产品
剃须
您的皮肤可能需要 2 到 3 周才能适应飞
利浦剃须系统。
在干爽的面部剃须效果最佳。
1 向上推动开/关滑钮以接通剃须刀电
源。(图5)
2 将剃须刀头在皮肤上移动。作直线
和迂回动作。(图6)
3 向下推动开/关滑钮以关闭剃须刀电源。
4 使用之后用保护盖盖好剃须刀，以
防剃须刀头受损（可听到“咔哒”
一声）。(图7)
清洁和保养
不要使用钢丝球、研磨性清洁剂或腐
蚀性液体（例如汽油或丙酮）来清洁
产品。
为保证更好的剃须效果，剃须刀必须定
期清洗。
为了更方便有效地清洁剃须刀，特推
出飞利浦剃须刀头清洁喷雾剂（型号
HQ110）。有关信息，请咨询飞利浦家
庭小电器客户服务部。
注意：飞利浦剃须刀头清洁喷雾剂并非
所有国家/地区都有销售。请向当地的客
户服务中心了解是否有售。
您也可以用下列方式清洁剃须刀：
每周：剃须刀头组件和胡茬储藏室
1 关闭剃须刀。
2 用清洁刷清洁产品顶部。(图8)
3 按下释放钮(1)，取下剃须刀头组件
(2)。(图9)
4 用清洁刷清洁胡茬储藏室的内侧。
(图10)
5 用清洁刷清洁剃须刀头部件的内
侧。(图11)
6 将剃须刀头组件重新安装到剃须刀上。
问题 可能的
原因
解决方法
剃须性
能下
降。
剃须刀
头很
脏。
彻底清洁剃须
刀。见“清洁和
保养”一章。
过长的
胡须堵
塞了剃
须刀
头。
用随附的清洁刷
清洁刀片和网
罩。见“清洁和
保养”一章。
剃须刀
头已损
坏或磨
损。
更换剃须刀头。
见“更换”一
章。
向上推
动开/
关滑钮
时剃须
刀不工
作。
电池已
耗尽。
更换电池。见“
使用准备”一
章。
电池放
置不正
确。
确保电池的正负
极指示与电池仓
内的正负极指示
一致（见“使用
准备”一章）。
皮肤过
敏。
您的皮
肤需要
一定的
时间来
适应飞
利浦剃
须刀。
开始使用时的 2-3
周内，皮肤过敏
是正常情况。在
此之后，通常不
再会出现皮肤过
敏现象。
每两个月：清洁剃须刀头
1 关闭剃须刀。
2 按下释放钮(1)，取下剃须刀头组件
(2)。(图9)
3 要取下固定架，请捏拢中央弹簧的两
侧(1)。然后向上提起固定架，将其
从剃须刀头部件中取出(2)。(图12)
4 将剃须刀头滑离固定架。(图13)
不要将刀片和网罩混合在一起。
刀片和网罩是相互匹配。每组刀片和网
罩都已相互磨合得很好，可获得最佳剃
须效果。如果不小心将它们弄混，剃须
刀将需要数周时间才能恢复到最佳剃
须性能。
5 用清洁刷的短毛一侧清洁刀片。
(图14)
按箭头方向仔细刷净。
6 用清洁刷清洁网罩。(图15)
7 滑动剃须刀头，将其重新安装到固
定架上，然后将固定架重新安装到
剃须刀头组件上。(图16)
8 将剃须刀头组件重新安装到剃须刀上。
极其彻底的清洁
如需彻底清洁，则应每隔六个月将剃须
刀头浸入脱脂液（如酒精）清洗。按照
上述步骤 1 至 4 取下剃须刀头。清洗完
成后，向网罩内的中心点滴入一滴缝纫
机油，以防剃须刀头磨损。
更换
剃须刀头应每两年更换一次，损坏或磨
损时也应加以更换。只能用 HQ4 飞利
浦剃须刀头进行更换。
1 关闭剃须刀。
2 按下释放钮(1)，取下剃须刀头组件
(2)。(图9)
3 要取下固定架，请捏拢中央弹簧的
两侧(1)。然后向上提起固定架，将
其从剃须刀头部件中取出(2)。
(图12)
4 将剃须刀头从固定架上滑出，用新
的剃须刀头更换。(图13)
5 将固定架重新安装到剃须刀头组件上。
6 将剃须刀头组件重新安装到剃须刀上。
订购附件
要购买本产品的附件，请访问我们
的在线商城 www.shop.philips.com/
service。如果您的国家/地区没有在线
商城，请联系您的飞利浦经销商或飞利
浦服务中心。如果您购买产品的附件有
困难，请联系您所在国家/地区的飞利浦
客户服务中心。可在全球保修卡中找到
其详细联系信息。
为了保持剃须刀的最佳性能，请确保定
期清洁并在推荐的时间更换剃须刀头。
剃须刀头
-建议您每两年更换一次剃须刀头。
务必使用适合剃须刀类型的剃须刀
头进行更换。 (图 17)
清洁
-使用清洁喷雾剂 HQ110 彻底清洁
剃须刀头。
此剃须刀的可用附件：
-HQ4 飞利浦剃须刀头。
-HQ110 飞利浦剃须刀头清洁喷雾剂。
环保
-电池含有可能会污染环境的物质。
不要将耗尽的电池与一般的生活垃
圾一同弃置，而应将其交给官方回
收站。丢弃产品时，一定要将电池
取出，或将其送到官方指定的回收
站。 (图 18)
-弃置产品时，请不要将其与一般生
活垃圾堆放在一起；应将其交给官
方指定的回收中心。这样做有利于
环保。 (图 19)
保修与服务
如果您需要服务或信息，或者有任何疑
问，请访问飞利浦网站：www.philips.
com/support。您也可与您所在国家/地
区的飞利浦客户服务中心联系（可从全
球保修卡中找到其电话号码）。如果您
所在的国家/地区没有飞利浦客户服务中
心，请与当地的飞利浦经销商联系。
保修条款
由于剃须刀头（刀片和网罩）属于易磨
损物品，因此不在国际保修条款的涵盖
范围之列。
故障种类和处理方法
本章归纳了使用本产品时最常见的一些
问题。如果您无法根据以下信息解决问
题，请访问 www.philips.com/support
查阅常见问题列表，或联系您所在国家/
地区的客户服务中心。
2012/07/03